Determination of trace inpurities high-purity aluminum oxide by inductively-coupled plasma atomic emission-spectrometry

Trace impurities (Ca, Cu, Fe, Mg, Mn, Na and Si) in 99.99% aluminum oxide were determined by inductively-coupled plasma atomic emission spectrometry (i.c.p./a.e.s.). The sample was fused with lithium carbonate/boric acid to determine Ca, Cu, Mg, Mn, Na and Si or dissolved in phosphoric/sulphuric acids to determine iron. Matrix effects on the calibration graphs for each element were studied: for accurate determinations, calibration solutions must contain lithium and boric acid (or aluminium and phosphoric and sulphuric acids for iron).     

Circular dichroism spectra of the inclusion complexes of phlorizin in cyclodextrins

Two aromatic rings of a phlorizin molecule form inclusion complexes with -CD and -CD. Induced circular dichroism spectra of these complexes have been measured to estimate the orientation of the two aromatic rings in the hydrophobic space of CDs. Apparent complex formation constants have been also estimated for each complex. It is concluded that phlorizin forms a stronger inclusion complex with -CD than with -CD.     

An efficient synthesis of N-tert-butoxycarbonyl-O-cyclohexyl-L-tyrosine

A facile and efficient synthesis of N-tert-butoxycarbonyl-O-cyclohexyl-L-tyrosine [Boc-Tyr(Chx)-OH] is described. Boc-Tyr-OH was treated with NaH in dimethylformamide and then with 3-bromocyclohexene to give N-Boc-O-(cyclohex-2-enyl)-L-tyrosine [Boc-Tyr(Che)-OH] in 70% yield. Hydrogenation of Boc-Tyr(Che)-OH over PtO2 afforded Boc-Tyr(Chx)-OH in almost quantitative yield. The highest yield was achieved when a side product in the synthesis of Boc-Tyr-OH, Boc-Tyr(Boc)-OH, was not removed, because it was also converted to Boc-Tyr(Che)-OH without any additional manipulations. The new synthetic method described here is convenient for practical use, and would facilitate the widespread use of the Chx group for the hydroxy-protection of Tyr.     

NMR, UV-vis and CD study on the interaction of pradimicin BMY-28864 with divalent cations of alkaline earth metal

In order to clarify the mechanism of the calcium-activated anti-fungal action of pradimicin derivatives, we investigated the compatibility of four divalent metal cations, Ca2+, Mg2+, Sr2+ and Ba2+, when combined with pradimicin BMY-28864 in an aqueous solution. The 1H NMR studies suggest that all the tested cations can induce a chemical exchange between two types of aggregation of BMY-28864 in an aqueous solution. The exchange rate, however, varies according to the cation species. In descending order they are: Ba2+ > Sr2+ > Ca2+ > Mg2+. The differences in the binding ability of BMY-28864 to the cations and the solubility of the chloride salts are explained by the electronegativity of these cations. The UV-Vis and CD spectra of these solutions show isosbestic points that correspond to an exchange process in the cations' binding to BMY-28864. The results provide experimental support for the hypothesis that there is a common mechanism underlying their cations interactions with the antibiotic. The CD study also provided evidence about the stoichiometric relation of the divalent metal ions to the antibiotic, 1:2, which was obtained by NMR analyses.     

Monolithic silica columns with various skeleton sizes and through-pore sizes for capillary liquid chromatography

Reduction of through-pore size and skeleton size of a monolithic silica column was attempted to provide high separation efficiency in a short time. Monolithic silica columns were prepared to have various sizes of skeletons (approximately 1-2 microm) and through-pores (approximately 2-8 microm) in a fused-silica capillary (50-200 microm I.D.). The columns were evaluated in HPLC after derivatization to C18 phase. It was possible to prepare monolithic silica structures in capillaries of up to 200 microm I.D. from a mixture of tetramethoxysilane and methyltrimethoxysilane. As expected, a monolithic silica column with smaller domain size showed higher column efficiency and higher pressure drop. High external porosity (> 80%) and large through-pores resulted in high permeability (K = 8 x 10(-14) -1.3 x 10(-12) m2) that was 2-30 times higher than that of a column packed with 5-mirom silica particles. The monolithic silica columns prepared in capillaries produced a plate height of about 8-12 microm with an 80% aqueous acetonitrile mobile phase at a linear velocity of 1 mm/s. Separation impedance, E, was found to be as low as 100 under optimum conditions, a value about an order of magnitude lower than reported for conventional columns packed with 5-microm particles. Although a column with smaller domain size generally resulted in higher separation impedance and the lower total performance, the monolithic silica columns showed performance beyond the limit of conventional particle-packed columns under pressure-driven conditions.     

Interaction between peroxide ion and phenol group which are coordinated to the same iron(III) ion

We have prepared several new iron(III) complexes with ligands which contain a phenol group; these are tetradentate [(X-phpy)H, X and H(phpy) represent the substituents on the phenol ring and N,N-bis(2-pyridylmethyl)-N-(2-hydroxybenzyl)amine, respectively] and pentadentate ligands [(R-enph-X)H; R=ethyl(Et) or methyl(Me) derivative and H(Me-enph) denotes N,N-bis(2-pyridylmethyl)-N″-methyl-N″-(2″-hydroxyl-benzylamine)ethylenediamine] and have determined the crystal structures of Fe(phpy)Cl₂, Fe(5-NO₂-phpy)Cl₂, and Fe(Me-enph)ClPF₆, which are of a mononuclear six-coordinate iron(III) complex with coordination of one or two chloride ion(s). These compounds are highly colored (dark violet) due to the coordination of phenol group to an iron(III) atom. When hydrogen peroxide was added to the solution of the iron(III) complex, a color change occurs with bleaching of the violet color, indicating that oxidative degradation of the phenol moiety occurred in the ligand system. The bleaching of the violet color was also observed by the addition of t-butylhydroperoxide. The rate of the disappearance of the violet color is highly dependent on the substituent on the phenol ring; introduction of an electron-withdrawing group in the phenol ring decreases the rate of bleaching, suggesting that disappearance of the violet band should be due to a chemical reaction between the phenol group and a peroxide adduct of the iron(III) species with an η¹-coordination mode and that in this reaction the peroxide adduct acts as an electrophile towards phenol ring. The intramolecular interaction between the phenol moiety and an iron(III)-peroxide adduct may induce activation of the peroxide ion, and this was supported by several facts that the solution containing an iron(III) complex and hydrogen peroxide exhibits high activities for degradation of nucleosides and albumin.     

Synthesis of directly linked zinc(II) porphyrin-imide dyads and energy gap dependence of intramolecular electron transfer reactions

A series of zinc(II) porphyrin-imide dyads (ZP-Im), in which an electron donating ZP moiety is directly connected to an electron accepting imide moiety in the meso position, have been prepared for the examination of energy gap dependence of intramolecular electron transfer reactions with large electronic coupling. The nearly perpendicular conformation of the imide moiety towards the porphyrin plane has been revealed by Xray crystal structures. The energy gap for charge separation, 1ZP* - Im --> ZP+ - Im-, is varied by changing the electron accepting imide moiety to cover a range of about 0.8 eV in DMF. Definitive evidence for electron transfer has been obtained in three solvents (toluene, THF, and DMF) through picosecond-femtosecond transient absorption studies, which have allowed us to determine the rates of photoinduced charge separation, 1ZP* - Im --> ZP+ - Im-, and subsequent thermal charge recombination ZP+ - Im- --> ZP - Im. The free-energy gap dependence (energy gap law) has been probed from the normal to the nearly top region for the charge separation rate alone, and only the inverted region for the charge recombination rate. Although both of the energy gap dependencies can be approximately reproduced by means of the simplified semiclassical equation, when we take into consideration the effect of the high frequency vibrations replaced by one mode of averaged frequency, many features, including the effects of solvent polarity and the electron tunneling matrix element on the energy gap law, differ considerably from those of the previously studied porphyrin-quinone systems, which have weaker interchromophore electronic interactions.     

Radiation-induced solid-state polymerization of trioxane under high pressure

The in-source polymerization of trioxane in the solid state was investigated over a wide range of temperature and pressure, i.e., from 30 to 140°C and up to 7000 kg/cm², respectively. In the polymerization that was carried out slightly below the melting point under pressure, the higher the pressure, the higher the rate of polymerization. It was confirmed that the maximum rate of solid-state polymerization of trioxane occurs near the melting points, even under elevated pressure. The rate of polymerization decreased with increasing pressure at constant temperature. The shape of the time–conversion curves may be classified into two types, i.e., one which is typical of high pressure and low temperature, and the other which is typical of low pressure and high temperature. Changes in the shape of the conversion—intrinsic viscosity curves occurred coincidentally. Thus, three regions for the different “polymerization characteristic” were determined as functions of polymerization temperature and pressure. Explanations are given for the above-mentioned polymerization characteristic.