Synthesis of mikto‐topology star polymer containing one cyclic arm

Well‐defined mikto‐topology star polystyrene composed of one cyclic arm and four linear arms was synthesized by a combination of atom transfer radical polymerization (ATRP) and Cu‐catalyzed azide‐alkyne cycloaddition (CuAAC) click reaction. First, the bromine‐alkyne α,ω‐linear polystyrenes containing four hydroxyl groups protected with acetone‐based ketal groups were synthesized by ATRP of styrene using a designed initiator. Then, the bromine end‐group was converted to the azide and the linear polystyrene was cyclized intra‐molecularly by the CuAAC reaction. The four hydroxyl groups were released by deprotection and then esterified with 2‐bromoisobutyryl bromide to produce a cyclic polymer bearing four ATRP initiating units. By subsequent ATRP of styrene to grow linear polymers with the cyclic polystyrene as a macroinitiator, the mikto‐topology star polymers were prepared. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel ether-functional spiro-tetronic acid derivatives: molecule design, convenient synthesis and biological evaluation

A novel series of ether functionalization of spiro-tetronic acid derivatives have been designed and conveniently synthesized via three steps, including esterification, one-pot heterocyclization, and etherification reactions. The target molecules have been identified on the basis of analytical spectra data. All newly synthesized compounds have been screened for their potential insecticidal activity against Heliothis armigera and Plutella xylostella compared with spirodiclofen by standard method.     

From cluster assembly to ultrathin nanocrystals and complex nanostructures

Ultrathin nanostructures have attracted much attention in recent years due to their predictable novel properties and various potential applications. The improvement in synthetic skills has led to many successful syntheses of nanostructures including zerodimensional (0D) nanoclusters, one-dimensional (1D) nanowires, two-dimensional (2D) nanosheets and other higher-level complex nanostructures, where cluster-assembly of primary nanocrystals is a common process. In this review, progress in ultrathin nanocrystals in the last decade and several important factors in the growth mechanisms are covered. By giving examples of cluster assembly from 1D to 3D nanostructures, the utility of cluster assembly in the synthesis of new materials has been demonstrated.     

Z=18—82原子的同步辐射内壳层光电离积分截面的计算和讨论

此文计算了Ｚ＝１８－８２的原子在北京同步辐射４Ｂ９Ａ束线的白色Ｘ光照射下的光电离积分截面Ｇ值。结果表明，有三个Ｇ值较大的区域，Ｚ＝１８－２０，３９－４７和５９－８２，最大值分别为３．８×１０－６，１．６×１０－５和３．５×１０－５ｐｈｏｔｏｎｓ·ｃｍ２／ｓ。同时，估计了平衡时主要多重电荷态离子数目，分析了用同步辐射和离子阱进行多重电荷态实验的新的候选原子，讨论了有关实验方法和技术。     

北京自由电子激光最近进展──实现饱和振荡

北京自由电子激光(BFEL)装置于1993年底在10.68μm处实现了饱和振荡.输出激光能量为3mJ,饱和平顶宽度2μs.对应饱和振荡平均功率为210kW(宏脉冲),峰值功率约为20MW,比自发辐射高8个量级,单程小讯号净增益为24%,转换效率为0.45%,与理论预期结果相符.光束质量接近衍射极限.目前装置可工作于9-11μm.     

水溶液中新型氨羧螯合剂对Eu3+、Tb3+离子的敏化发光性能研究

研究了四种新型氨羧螯合剂在水溶液中自身的荧光及对Eu3+、Tb3+离子的敏化发光性能.考察了浓度、pH值对荧光强度的影响.     

UHF机械调谐器调谐电容片形的程序设计

采用传输线理论可以计算机械式UHF调谐器对应不同频率点的调谐电容量。在进行满足直线频率关系的调谐电容片形设计时,应当求出调谐电容量C_Τ与旋转角θ的显式函数关系。但对于分布参数的电路,这有一定的困难。本文采用数值计算方法完成了具有良好直线频率跟踪特性的调谐电容片形的设计,并由计算机自动绘出了片形。     

基于数学形态学的表面原子熔融相的 STM图像识别算法

高温扫描隧道显微镜(HT-STM)可以实时原位地捕捉到表面原子的熔化相变过程.在这一原位变温实验中,快速可靠地识别出每帧STM图像中的熔融相十分关键.传统的手工统计方法存在效率低下、随意性大等问题.我们发展出一套基于数学形态学的算法,来自动快速地识别.与人工方法相比,该算法消除了人为主观误差,使确定的边界更加准确、光滑,处理效率提高了266倍.     

Cr、Mn、Co、Ni掺杂对Al13Fe4相稳定性和力学性能影响的第一性原理研

采用基于密度泛函理论的第一性原理计算方法,系统地研究了不同掺杂浓度下过渡族元素Cr、Mn、Co、Ni在Al13Fe4相中的占位情况、结构稳定性和机械性能. 计算得到所有的Al13(Fe24-xMx) (M=Cr、Mn、Co、Ni;X=1,2,4)相都具有良好的热力学稳定性和机械稳定性. 相同掺杂浓度化合物的形成焓按如下顺序减小：Al78(Fe24-xCrx) > Al78(Fe24-xMnx) > Al13Fe4 > Al78(Fe24-xNix) > Al78(Fe24-xCox).形成焓的降低增加了Al13Fe4相成核驱动力,Co和Ni有利于促进Al-Fe合金中Al13Fe4相形核,细化Al13Fe4相. 过渡族元素可以改善金属间化合物的脆性,增强塑性变形能力. 并且随着掺杂浓度的增加,过渡族元素的加入对脆性的改善呈先增大后减小的趋势.     

<Emphasis Type="Italic">I</Emphasis>-projection onto isotonic cones and its applications to maximum likelihood estimation for log-linear models

A frequently occurring problem is to find a probability vector,p∈D, which minimizes theI-divergence between it and a given probability vector π. This is referred to as theI-projection of π ontoD. Darroch and Ratcliff (1972,Ann. Math. Statist.,43, 1470–1480) gave an algorithm whenD is defined by some linear equalities and in this paper, for simplicity of exposition, we propose an iterative procedure whenD is defined by some linear inequalities. We also discuss the relationship betweenI-projection and the maximum likelihood estimation for multinomial distribution. All of the results can be applied to isotonic cone.