Enhancement of photocurrent generation by honeycomb structures in organic thin films.

A light-emitting poly (distyryldimethylbenzene-co-triethylene glycol) rod-coil block copolymer was used to fabricate films with three-dimensionally ordered honeycomb structures by the breath-figure method. Photocurrent generation and photovoltaic performance are studied, and the dependence of photocurrent on applied electric field is investigated. Introducing the ordered porous structure significantly improves the photoelectric conversion behavior, because porous structures not only enhance the light-harvesting efficiency but also benefit charge separation and charge transfer. This phenomenon may have great prospects for enhancing the photovoltaic behavior of organic thin-film devices.     

微分脉冲极谱同时测定三种碱性氨基酸的研究

应用微分脉冲极谱，在ｐＨ９．０ ＮａＢ４Ｏ７－ ＣＨ３ＣＨＯ－Ｃｏ２＋－ ＮａＯＨ组成的极谱底液，扫描电位－ ０．８０～－ １．６０ Ｖ、振幅 ２０ｍＶ、扫描速度５ｍＶ／ｓ、一滴汞周期２ｓ的条件下进行连续扫描测量三种碱性氨基酸，获得三个灵敏 度和分辨率均较高的极谱峰图。该法简便快速，稳定可靠，为测量各种蛋白质中的三种磁性氨基酸提供一种新途 径。     

Solid-phase extraction of iron(III) with an ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique

A new Fe(III)-imprinted amino-functionalized silica gel sorbent was prepared by a surface imprinting technique for selective solid-phase extraction (SPE) of Fe(III) prior to its determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Compared with non-imprinted polymer particles, the ion-imprinted polymers (IIPs) had higher selectivity and adsorption capacity for Fe(III). The maximum static adsorption capacity of the ion-imprinted and non-imprinted sorbent for Fe(III) was 25.21 and 5.10 mg g⁻¹, respectively. The largest selectivity coefficient of the Fe(III)-imprinted sorbent for Fe(III) in the presence of Cr(III) was over 450. The relatively selective factor (α_r) values of Fe(III)/Cr(III) were 49.9 and 42.4, which were greater than 1. The distribution ratio (D) values of Fe(III)-imprinted polymers for Fe(III) were greatly larger than that for Cr(III). The detection limit (3σ) was 0.34 μg L⁻¹. The relative standard deviation of the method was 1.50% for eight replicate determinations. The method was validated by analyzing two certified reference materials (GBW 08301 and GBW 08303), the results obtained is in good agreement with standard values. The developed method was also successfully applied to the determination of trace iron in plants and water samples with satisfactory results.     

反相微乳液法制备棒状羟基磷灰石纳米粒子

在(Tritonx-100 Tween 80)，环己烷，(正己醇 正丁醇)，0．5mol／L Ca(NO3)2水溶液反相微乳液体系中，采用滴加0．3mol／L(NH4)2HPO4水溶液的加料方式成功制备出直径在20～25nm，长度在28～64nm的棒状羟基磷灰石纳米粒子。通过对(Triton X-100 Tween 80)，环己烷，(正己醇 正丁醇)／0．5mol／L Ca(NO3)2水溶液三元相图及水溶液反应机理的分析，确定了最佳反相微乳液组成；研究了HLB值和表面活性剂用量对羟基磷灰石颗粒大小的影响。实验结果表明，最佳反相微乳液组成为：47．6(wt)％的环己烷、37．4(wt)％的表面活性剂和助表面活性剂、15(wt)％0．5mol／L的Ca(NO3)2水溶液。     

Icosahedral gold cage clusters: M@Au12- (M=V, Nb, and Ta)

We report the observation and characterization of a series of stable bimetallic 18-valence-electron clusters containing a highly symmetric 12-atom icosahedral Au cage with an encapsulated central heteroatom of Group VB transition metals, M@Au(12) (-) (M=V,Nb,Ta). Electronic and structural properties of these clusters were probed by anion photoelectron spectroscopy and theoretical calculations. Characteristics of the M@Au(12) (-) species include their remarkably high binding energies and relatively simple spectral features, which reflect their high symmetry and stability. The adiabatic electronic binding energies of M@Au(12) (-) were measured to be 3.70+/-0.03, 3.77+/-0.03, and 3.76+/-0.03 eV for M=V, Nb, and Ta, respectively. Comparison of density-functional calculations with experimental data established the highly symmetric icosahedral structures for the 18-electron cluster anions, which may be promising building blocks for cluster-assembled nanomaterials in the form of stoichiometric [M@Au(12) (-)]X(+) salts.     

Recognition of single nucleotide polymorphisms using scanning potential hairpin denaturation

Conventional single nucleotide polymorphism (SNP) assays, which based their detection on the stringency or temperature of the washing buffers, have encountered difficulties to distinguish a single base pair mismatch from a perfect match. In this study, scanning potential hairpin denaturation (SPHD) has been developed to detect SNP in a sensitive and reliable manner. Combined with hairpin oligonucleotide probes, scanning surface electric potential was used to induce a dissociation of double-stranded DNA around a unique "melting potential" (Vm), and it generated a high-contrast SNP recognition signal. A 21 base pair p53 gene segment was used to test this novel method. A single nucleotide mismatch to the hairpin probes caused an average of 400-800 mV difference in melting potential against the perfect match, while the error of this assay was lower than 20 mV. Experiments demonstrated that the hairpin stem was critical to the method. The concept of scanning potential hairpin denaturation could also be used extensively in different areas of nucleotide hybridization based assays.     

An extended two‐dimensional copper–molybdate compound with mixed dicarboxyl and organodiamine ligands

The title complex, poly[di‐μ₃‐oxo‐hepta‐μ₂‐oxo‐tetra­oxo­bis(1,10‐phenanthroline)‐μ₄‐terephthalato‐dicopper(II)­tetra­molybdate(VI)], [Cu₂Mo₄(C₈H₄O₄)O₁₃(C₁₂H₈N₂)₂], represents a novel two‐dimensional copper–molybdate compound with mixed ligands. Tetra­nuclear molybdenum oxide clusters are joined through corner‐sharing into a ribbon‐like chain, with [Cu(phen)]²⁺ (phen is 1,10‐phenanthroline) complexes grafted onto either side. The terephthalate ligand lies about an inversion centre and links these chains to form a layer via Cu—O and Mo—O bonds. Face‐to‐face π–π stacking inter­actions between adjacent phen ligands stabilize the structure.     

Synthesis,structures and properties of two novel copper(II) complexes with hydrogen bonding supramolecular networks

Two novel complexes, [Cu(HL)₂(H₂O)]₂(OH)₂(ClO₄)₂·1.5H₂O (1) and [Cu(HL)₂]Cl₂·4H₂O (2), have been prepared by reacting copper salts with the 4-amino-3-ethyl-1,2,4-triazole-5-thione (HL) ligand in neutral solution and in HCl (6 mol L^–1) medium, respectively. They were characterized by FT-IR and u.v.–vis. spectra, and the structures were determined by single crystal X-ray diffraction techniques. In both complexes, the triazole ligand chelated the metal ions through the amine and thione substituents on the five-membered ring. Complex (1) has a square-pyramidal copper(II) ion coordinated by two triazole ligands and one water molecule. Unlike (1), the Cu²⁺ ion in (2) displays its characteristic Jahn–Teller distortion with the distance of the Cl^– anions to metal ion further away than that of the triazole ligands. The most intriguing structural features of the title complexes are that the HL ligands chelate copper(II) ions through the N(1) and S(1) atoms, in a cis mode in (1) and a trans mode in (2). In both cases, self-assembled crystals, by supramolecular contacts simultaneously, form two multi-dimensional frameworks.     

用双表面活性剂为共模板合成中孔分子筛MCM-48

利用水热法以非离子表面活性剂聚乙二醇辛基苯基醚和阳离子表面活性剂十六烷基三甲基溴化铵为共模板合成了中孔分子筛MCM-48.实验中发现利用较强的范德华力和氢键,聚乙二醇辛基苯基醚可在很大程度上降低合成MCM-48所需阳离子表面活性剂的用量,且利于制备有序性好、骨架聚合度高、稳定性好的MCM-48.通过调节聚乙二醇辛基苯基醚与十六烷基三甲基溴化铵的比例,可得到不同物相结构的分子筛.