Simultaneous determination of UV filters and polycyclic musks in aqueous samples by solid-phase microextraction and gas chromatography–mass spectrometry

A simple, precise and accurate method for the simultaneous determination of four UV filters and five polycyclic musks (PCMs) in aqueous samples was developed by solid-phase microextraction coupled with gas chromatography–mass spectrometry (SPME-GC–MS). The operating conditions affecting the performance of SPME-GC–MS, including fiber thickness, desorption time, pH, salinity, extraction time and temperature have been carefully studied. Under optimum conditions (30 μm PDMS fiber, 7 min desorption time, pH 7, 10% NaCl, 90 min extraction time at 24 °C), the correlation coefficients (r²) of the calibration curves of target compounds ranged from 0.9993 to 0.9999. The limit of detection (LOD) and limit of quantification (LOQ) ranged from 0.2 to 9.6 ng L⁻¹ and 0.7 to 32.0 ng L⁻¹, respectively. The developed procedure was applied to the determinations of four UV filters and five PCMs in river water samples and internal standard was used for calibration to compensate the matrix effect. Good relative recoveries were obtained for spiked river water at low, medium and high levels. The proposed SPME method was compared with traditional SPE procedure and the results found in river water using both methods were in the same order of magnitude and both are quite agreeable.     

三核铜(Ⅰ/Ⅱ)配合物[Cu(en)_2]·[Cu(pht)_2]_2的合成、晶体结构及与DNA相互作用的研究

报道了多核铜配合物[Cu(en)_2]·[Cu(pht)_2]_2(Hpht:苯妥英,即5,5-二苯基-2,2-咪唑烷酮;en:乙二胺)的溶剂热合成、晶体结构及其与DNA的相互作用.该晶体属三斜晶系,P_1~-空间群,晶胞参数:a=0.8453(2)nm,b=1.1878(3)nm,c=1.5674(4)nm,a=101.197(3)°,β=97.690(3)°,γ=103.283(3)°,V=1.476(6)nm~3,D_c=1.480 g/cm~3,Z=1,F(000)=679,μ=1.139nm~(-1),R_1=0.0402,wR_2=0.0962[I>2σ(Ⅰ)],GOF=1.035.XPS和X射线单晶衍射数据显示该配合物分子由混价铜组成,包括两个一价铜和一个二价铜,其中每个Cu(Ⅰ)分别与两个苯妥英配体提供的氮原子配位,N-Cu(Ⅰ)-N的夹角为177°,一个Cu(Ⅱ)与六个配位原子配位(CuN_4O_2),形成一个稍变形八面体结构.配合物与DNA相互作用研究表明,该配合物主要是以插入方式与小牛胸腺DNA结合.     

Rationally Designed Three‐Layered Cu2S@Carbon@MoS2 Hierarchical Nanoboxes for Efficient Sodium Storage

Hybrid materials, integrating the merits of individual components, are ideal structures for efficient sodium storage. However, the construction of hybrid structures with decent physical/electrochemical properties is still challenging. Now, the elaborate design and synthesis of hierarchical nanoboxes composed of three‐layered Cu₂S@carbon@MoS₂ as anode materials for sodium‐ion batteries is reported. Through a facile multistep template‐engaged strategy, ultrathin MoS₂ nanosheets are grown on nitrogen‐doped carbon‐coated Cu₂S nanoboxes to realize the Cu₂S@carbon@MoS₂ configuration. The design shortens the diffusion path of electrons/Na⁺ ions, accommodates the volume change of electrodes during cycling, enhances the electric conductivity of the hybrids, and offers abundant active sites for sodium uptake. By virtue of these advantages, these three‐layered Cu₂S@carbon@MoS₂ hierarchical nanoboxes show excellent electrochemical properties in terms of decent rate capability and stable cycle life.     

Optical properties of cadmium sulfide nanocrystal film prepared by electrochemical synthesis at liquid-liquid interface

Dendritic nanocrystalline CdS film was deposited at liquid-liquid interface of surfactants and an electrolyte containing 4 mmol L⁻¹ cadmium chloride (CdCl₂) and 16 mmol L⁻¹ thioacetamide (CH₃CSNH₂) with an initial pH value of 5 at 15 °C by electrochemical synthesis. The nanofilm was characterized by transmission electron microscopy (TEM), field emission scanning electron microscope (FE-SEM), atomic force microscopy (AFM), ultraviolet visible (UV-vis) absorption spectroscopy and fluorescence spectroscopy. The surface morphology and particle size of the nanofilm were investigated by AFM, SEM and TEM, and the crystalline size was 30-50 nm. The thickness of the nanofilm calculated by optical absorption spectrum was 80 nm. The microstructure and composition of the nanofilm was investigated by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), showing its polycrystalline structure consisting of CdS and Cd. Optical properties of the nanofilm were investigated systematically by UV-vis absorption and fluorescence spectroscopy. A λ_onset blue shift compared with bulk CdS was observed in the absorption spectra. Fluorescence spectra of the nanofilm indicated that the CdS nanofilm emitted blue and green light. The nanocomposites film electrode will bring about anodic photocurrent during illumination, showing that the transfer of cavities produces photocurrent.     

Zincophilic Interfacial Manipulation against Dendrite Growth and Side Reactions for Stable Zn Metal Anodes

Constructing multifunctional interphases to suppress the rampant Zn dendrite growth and detrimental side reactions is crucial for Zn anodes. Herein, a phytic acid (PA)-ZnAl coordination compound is demonstrated as a versatile interphase layer to stabilize Zn anodes. The zincophilic PA-ZnAl layer can manipulate Zn²⁺ flux and promote rapid desolvation kinetics, ensuring the uniform Zn deposition with dendrite-free morphology. Moreover, the robust PA-ZnAl protective layer can effectively inhibit the hydrogen evolution reaction and formation of byproducts, further contributing to the reversible Zn plating/stripping with high Coulombic efficiency. As a result, the Zn@PA-ZnAl electrode shows a lower Zn nucleation overpotential and higher Zn²⁺ transference number compared with bare Zn. The Zn@PA-ZnAl symmetric cell exhibits a prolonged lifespan of 650 h tested at 5 mA cm⁻² and 5 mAh cm⁻². Furthermore, the assembled Zn battery full cell based on this Zn@PA-ZnAl anode also delivers decent cycling stability even under harsh conditions.     

An Ultrasensitive Cyclization‐Based Fluorescent Probe for Imaging Native HOBr in Live Cells and Zebrafish

Bromine has been reported recently as being the 28^th essential element for human health. HOBr, which is generated in vivo from bromide, is a required factor in the formation of sulfilimine crosslinks in collagen IV. However, to date, no method for the specific detection of native HOBr in vivo has been reported. Herein, we develop a simple small molecular probe for imaging HOBr based on a specific cyclization catalyzed by HOBr. The probe can be easily synthesized in high yield through a Suzuki cross‐coupling reaction. The probe exhibits ultrahigh sensitivity at the picomole level, in addition to specificity for HOBr and real‐time response. Importantly, without Br^? stimulation, this probe reports native HOBr levels in HepG2 cells. Thus, the probe is a promising new tool for imaging endogenous HOBr and may provide a means for finding new physiological functions of HOBr in living organisms.     

联合勤务保障体系网络化建模与研究方法

为了研究联合勤务保障体系在作战行动中的作用,并为体系作战建立网络化的研究方法,提出了一种包含联合勤务网络的四层复杂作战网络,建立了相应的网络化模型。首先,对联合勤务保障体系进行了网络化的定义与描述,得到了认知域、信息域、物理域、联合勤务网络内每个节点的状态属性值;然后,建立了不同网络之间的涌现性模型,提出了作战链与勤务保障链的概念,通过定义涌现满足度曲线,得到了每个节点的网络涌现程度值;最后,针对同层网络和不同层网络分别提出了对应的网络体系同步能力提高方法。研究结果表明：建立的网络化模型与提高同步能力的方法合理有效,对于体系作战的量化研究有一定的实践意义。     

离子色谱法测定甘草提取物中草酸的含量

建立了用离子色谱测定甘草提取物中残留草酸含量的新方法。选用DionexIonPacAS11-HC阴离子分析柱(250mm×4mmi.d.),淋洗液为18mmol/LNaOH溶液,流速为1.0mL/min,抑制电导检测器检测。草酸色谱峰面积(Y)与浓度(X)在1.004～10.04mg/L内线性关系良好,线性回归方程为Y=0.1939X-0.0326,相关系数r=0.9999,检出限为0.012mg/L。样品回收率为96.8%～98.6%,相对标准偏差为0.78%。该方法简便、快速。     

Structure Determination of Alkynyl‐Protected Gold Nanocluster Au22(tBuC≡C)18 and Its Thermochromic Luminescence

An alkynyl‐protected gold nanocluster, Au₂₂(^tBuC≡C)₁₈ ( 1 ), has been synthesized and its structure has been determined by single‐crystal X‐ray diffraction. The molecular structure consists of a Au₁₃ cuboctahedron kernel and three [Au₃(^tBuC≡C)₄] trimeric staples. The cluster 1 has strong luminescence in the solid state with a 15 % quantum yield, and it displays interesting thermochromic luminescence as revealed by temperature‐dependent emission spectra. The enhanced room‐temperature emission is characterized as thermally activated delayed fluorescence.     

完全变换法在无网格伽辽金方法中的应用

由于移动最小二乘形函数一般不具有常规有限元或边界元形函数所具有的插值特征，本质边界条件的处理成为无网格伽辽金法实施中的一个难点。本文通过建立节点位移和广义位移之间的关系对移动最小二乘形函数进行修正，给出了修正的移动最小二乘形函数；以二维问题为例，对完全交换法在无网格伽辽金方法中的应用进行了研究，实现了本质边界条件在节点处的精确施加。数值计算结果表明该方法不仅简单合理，而且具有较高的精度、收敛性和稳定性。