用于纳米生物膜层厚度测试的光纤生物传感器

研制出光纤感应生物传感器,用以测试nm级的生物膜层的厚度.给出了测试的实现过程、实验结果和提高信噪比的方法,并与表面等离子体共振(SPR)技术进行了比较.     

正交共轭滤波器的构造

It is very importent for generating an orthonormal multiwavelet system to construct a conjugate quadrature filter(CQF). In this paper, a general method of deriving a length-L 1 conjugate quadrature filter from a length-L conjugate quadrature filter and vice versa is obtained. As a special case, we study generally the construction of any length-L 1 compactly supported symmetric-antisymmetric orthonormal multiwavelet system with multiplicity 2 from a length-L multiwavelet system and vice versa. Examples of conjugate quadrature filter are given.     

Generation of near transform-limited ultrashort laser pulses in kilohertz chirped-pulse amplification system by compensating high order phase distortions

The effects of gain narrowing and high order dispersions on the pulse duration in our kilohertz chirpedpulse amplification system have been compensated experimentally. Using an acousto-optic programmable dispersive filter (AOPDF), the spectral full-width at half-maximum (FWHM) is expanded from 30 to50 nm. Stable laser pulses with the duration of 30 fs (FWHM), which is 1.07 times Fourier-transformlimitation, have been acquired by pre-compensating the high order phase distortions using the phase measured by spectral phase interferometry for direct electric-field reconstruction (SPIDER).     

H4PMo11Vo40杂多酸及其镧盐的合成与性质

本文提出主要用~(51)V NMR、CV并辅以IR、XRD、DTG、元素分析等作为有效地核查纯度和表征催化剂的手段。     

Finite-time disturbance observer-based trajectory tracking control for quadrotor unmanned aerial vehicle with obstacle avoidance

This paper investigates the problem of trajectory tracking control for quadrotor unmanned aerial vehicle (UAV) in the presence of dynamic obstacles and external disturbance forces/torques. More specifically, two new sliding mode disturbance observers are firstly designed to estimate the external disturbances, in which the observation errors can converge to zero in finite time. Furthermore, utilizing the observation information, a new sliding mode surface-like variable-based position tracking control scheme and a novel nonsingular terminal sliding mode-based attitude synchronization control scheme are developed to drive the UAV tracking the reference trajectory with obstacle avoiding. Moreover, the tracking errors of the close-loop control system can converge to zero within finite time by the analyses of Lyapunov methodology. Finally, the numerical simulation results are presented to illustrate the effectiveness of the proposed control schemes.     

冲击伤复合高速破片致伤的损伤特点和冲击伤防护研究

探讨了冲击伤复合高速破片致伤的损伤特点及复合材料对冲击伤的防护效果。结果表明，肢体高速破片致伤对肺冲击伤具有加重作用，加重效应主要发生在原发冲击伤部位，加重效应的机理可能与压力波引起的血流扰动有关。利用复合材料防护可减轻肺冲击伤程度，降低动物的死亡率。     

Effect of surface chemical modification for aluminum hypophosphite with hexa‐(4‐aldehyde‐phenoxy)‐cyclotriphosphazene on the fire retardancy,water resistance,and thermal properties for polyamide 6

The surface chemical modified aluminum hypophosphite (AHP) defined as MAHP was successful prepared through P–H bonds on AHP surface reacted with the aldehyde groups in hexa‐(4‐aldehyde‐phenoxy)‐cyclotriphosphazene made in our lab. The wettability of the flame retardants was evaluated by water contact angle tests, and the water contact angle of the prepared MAHP dramatically increased from 0° for AHP to 145°, which indicated the surface modification made the superhydrophilic AHP into superior hydrophobic MAHP. The prepared MAHP and AHP, respectively, incorporated into polyamide 6 (PA6) matrix to prepare flame retardant PA6 composites and the fire retardancy and thermal degradation behavior of flame retardant PA6 composites were investigated by limiting oxygen index, vertical burning test (UL‐94), cone calorimeter, and thermogravimetric analysis tests. The morphologies and chemical compositions of the char residues for PA6 composites were investigated by scanning electron microscopy and X‐ray photoelectron spectroscopy, respectively. The water resistant properties of flame retardant PA6 composites were evaluated by putting the samples into distilled water at 70°C for 168 hr, and the mechanical properties for flame retardant PA6 composites were investigated by the tensile, flexural, and Izod impact strength tests. The results demonstrated that the PA6/MAHP composites successfully passed UL‐94 V‐0 flammability rating, and the limiting oxygen index value was 27.6% when the loading amount of MAHP was 21 wt%. However, there is no rating in vertical burning tests for PA6/AHP composite with the same amount of AHP, which indicated the surface modification of AHP enhanced the flame retardancy efficiency for PA6 composites. The morphological structures and analysis of X‐ray photoelectron spectroscopy of char residues revealed that the surface modification of AHP benefited to the formation of a sufficient, flame retardant elements rich, more compact and homogeneous char layer on the materials surface during combustion, which prevented the heat transmission and diffusion, limit the production of combustible gases, inhibit the emission of smoke and then led to the reduction of the heat release rate and smoke produce rate. The mechanical properties results revealed that the surface modification of AHP enhanced the mechanical properties, especially the Izod impact strength comparing with that of PA6/AHP composites with the same amount of flame retardant. After water resistance tests, the PA6/MAHP composites remained superior flame retardancy and presented continuous and compact char layer after cone calorimeter tests; however, the fire retardancy for PA6/AHP composite obviously decreased, and the char layer was discontinuous with big hole caused by the extraction of AHP by water during water resistance tests. Copyright © 2017 John Wiley & Sons, Ltd.     

Inequalities relating to Lp-version of Petty＇s conjectured projection inequality

Petty＇s conjectured projection inequality is a famous open problem in the theory of convex bodies. In this paper, it is shown that an inequality relating to Lp-version of the Petty＇s conjectured projection inequality is developed by using the notions of the Lp-mixed volume and the Lp-dual mixed volume, the relation of the Lp-projection body and the geometric body Г-pK, the Bourgain-Milman inequality and the Lp-Bnsemann-Petty inequality. In addition, for each origin-symmetric convex body, by applying the Jensen inequality and the monotonicity of the geometric body Г-pK, the reverses of Lp-version of the Petty＇s conjectured projection inequality and the Lp-Petty projection inequality are given, respectively.     

光纤传感器对机敏复合材料结构性能的影响

本文通过实验研究了光纤传感器对埋光纤机敏复合材料机械性能的影响，详细分析了埋光纤机敏复合材料层板在外载作用下的应力分布，针对三种不同铺层方式，研究了六种树脂填充区对机敏复合材料层板应力集中的影响，得出了减小应力集中的有效方案。