355nm Nd∶YAG激光在H_2中的高效一级斯托克斯转换

对脉冲Nd∶YAG激光(355 nm)在H2和H2∶He-Ar混合气体中的受激拉曼散射(SRS)进行了研究。在0.5 MPa的氢气中,同时测量到从二级反斯托克斯到三级斯托克斯的多波长输出,其总转化效率达88%;而高压下只剩下一级和二级斯托克斯输出,其中二级斯托克斯最大能量转化效率达44%(对应量子效率为63%)。由于高级斯托克斯的竞争,纯氢气中一级斯托克斯的最大能量转换效率不超过43%。通过向3 MPa氢气中掺入2 MPaAr气后,很好地抑制了二级斯托克斯的产生,从而获得了能量转换效率高达71%(对应量子效率为83%)的一级斯托克斯输出。对四波混频和级联受激拉曼散射在氢气多级斯托克斯产生中的作用以及惰性气体对它们的影响进行了讨论。     

关于Gerber不等式的一个猜想

本文证明了陈计-单墫关于Ｇｅｒｂｅｒ不等式的一个猜想，作为其应用，导出了单形内一点到顶点的距离与到面的距离的两个不等式．     

饱和水蒸汽与水的焓与熵参数的新关联式

饱和水蒸汽与水的焓与熵参数的新关联式李斯特，马润梅，吴冷（北京化工大学机械工程系北京１０００２９）关键词统计力学，剩余函数，焓与熵１引言本文根据统计力学与热力学剩余函数原理，结合本课题组曾已建立的饱和水蒸汽与水的新简明状态方程模型，经推导出一则适合于...     

Meso-tetraaryl cofacial bisporphyrins delivered by Suzuki cross-coupling

The Suzuki cross-coupling methodology provides a facile synthetic approach for the modular preparation of meso-tetraaryl cofacial bisporphyrins anchored by xanthene and dibenzofuran. This synthetic method furnishes cofacial bisporphyrin templates with enhanced steric and electronic protection from mu-oxo formation and oxidative degradation. The ability of these platforms to support multielectron oxidation chemistry mediated by proton-coupled electron transfer (PCET) is demonstrated by their reactivity for the catalytic disproportionation of hydrogen peroxide to oxygen and water.     

利用破坏对称性的超导人造原子制备χ型四比特纠缠态

提出了利用在一维传输线共振器中的破坏对称性的超导人造原子来制备χ型四比特纠缠态的方案. 方案中所用到的Δ型三能级人造原子不同于自然的原子, 它可以产生循环跃迁. 经过适当时间的相互作用和简单的操作, 可以得到想要制备的纠缠态. 由于人造原子的激发态和光子态被绝热消除, 所以该方案对于人造原子的自发辐射和传输线共振器的衰减是鲁棒的.     

600 kJ供能系统及其在轨道炮中的应用

 本文介绍了一种适合于电磁轨道炮使用的600 kJ供能系统。初级能源是电容器组。经过短路开关和电感储能线圈组成的转换电路，把能量输送给轨道炮。系统的主控开关和短路开关是金属接触型固体介质爆炸开关。本文推荐了一种爆炸开关闭合电阻随时间变化的经验模型。这套供能系统经过实验证明，它运行可靠、性能稳定。     

Reversible Photoinduced Conversion of Unprecedented Norbornadiene-Based Photoswitches with Redox-Active Naphthalene Diimide Functionalities

An unprecedented compound class of functional organic hybrids consisting of a photoswitchable norbornadiene building block and a redoxactive chromophore, namely naphthalene diimide, were designed and synthesized. Within these structures the capability of rylene chromophores to function as a redox active catalyst upon their photoexcitation was utilized to initiate the oxidative back-conversion of the in situ formed quadricyclane unit to its norbornadiene analogue. In this way successive photoexcitation at two different wavelengths enabled a controlled photoswitching between the two isomerical states of the hybrids. Beyond this prove of concept, the dependency of the reaction rate to the intramolecular distance of the two functional molecular building blocks as well as the concentration of the photoexcited sample was monitored. The experimental findings and interpretations were furthermore supported by quantum chemical investigations.     

Ultrahigh-intensity optical slow-wave structure

We report the development of corrugated "slow-wave" plasma guiding structures with application to quasiphase-matched direct laser acceleration of charged particles and generation of a wide spectrum of electromagnetic radiation. These structures support guided propagation at intensities up to 2 x 10(17) W/cm(2), limited by our current laser energy and side leakage. Hydrogen and argon plasma waveguides up to 1.5 cm in length with corrugation period as short as 35 microm are generated in a cryogenic cluster jet. Experimental data are consistent with simulations showing periodic modulations of the laser pulse intensity.     

Synergic Enhancement of High-density Polyethylene through Ultrahigh Molecular Weight Polyethylene and Multi-flow Vibration Injection Molding: A Facile Fabrication with Potential Industrial Prospects

General-purpose plastics with high strength and toughness have been in great demand for structural engineering applications. To achieve the reinforcement and broaden the application scope of high-density polyethylene(HDPE), multi-flow vibration injection molding(MFVIM) and ultrahigh molecular weight polyethylene(UHMWPE) are synergistically employed in this work. Herein, the MFVIM has better shear layer control ability and higher fabrication advantage for complex parts than other analogous novel injection molding technologies reported.The reinforcing effect of various filling times and UHMWPE contents as well as the corresponding microstructure evolution are investigated.When 5 wt% UHMWPE is added, MFVIM process with six flow times thickens the shear layer to the whole thickness. The tensile strength and modulus increase to 2.14 and 1.39 times, respectively, compared to neat HDPE on the premise of remaining 70% impact strength. Structural characterizations indicate that the enhancement is attributed to the improvement of shish-kebab content and lamellae compactness, as well as related to the corresponding size distributions of undissolved UHMWPE particles. This novel injection molding technology with great industrial prospects provides a facile and effective strategy to broaden the engineering applications of HDPE materials. Besides, excessive UHMWPE may impair the synergistic enhancement effect, which is also reasonably explained.