Excited-state metal-to-ligand charge transfer dynamics of a ruthenium(II) dye in solution and adsorbed on TiO2 nanoparticles from resonance Raman spectroscopy

The dynamics of metal-to-ligand charge transfer (MLCT) in a cis-bis(4,4'-dicarboxy-2,2'-bipyridine)-bis(isothiocyanato)ruthenium(II) dye (N3) are compared for the free dye in solution and the dye adsorbed on the surface of the TiO(2) nanoparticles from resonance Raman spectroscopy. The 544-nm MLCT absorption band of N3 adsorbed on TiO(2) is slightly blue-shifted from that of the free N3, indicating a weak electronic coupling between N3 and TiO(2). The resonance Raman spectra of N3 and the N3|TiO(2) complex obtained upon excitation within the lowest-lying MLCT singlet state of the dye are similar except for slight shifts in band positions. Resonance Raman cross sections have been obtained for the vibrational modes of both N3 and N3|TiO(2) with excitation frequencies spanning the 544-nm MLCT band. Self-consistent analysis of the resulting resonance Raman excitation profiles and absorption spectrum using a time-dependent wave packet formalism over two electronic states yields mode-specific vibrational and solvent reorganization energies. Despite the weak electronic coupling between N3 and TiO(2) in N3|TiO(2), adsorption strongly affects the reorganization energies of N3 in the intramolecular MLCT state. Adsorption of N3 onto TiO(2) increases the absolute Raman cross section of each mode by a factor of ca. 1.6 and decreases the vibrational and solvent reorganization energies by factors of 2 and 6, respectively. The excited-state dynamics of N3 adsorbed on the surface of TiO(2) nanoparticles were observed to be independent of the number of N3 molecules adsorbed per TiO(2) nanoparticle. The effect of TiO(2) on the dynamics of the adsorbed N3 is primarily due to both mode-specific vibrational and electronic pure dephasing, with the dominant contribution from the latter process.     

A microchip-based proteolytic digestion system driven by electroosmotic pumping

Microchip-based proteomic analysis requires proteolytic digestion of proteins in microdevices. Enzyme reactors in microdevices, fabricated in glass, silicon, and PDMS substrates, have recently been demonstrated for model protein digestions. The common approach used for these enzyme reactors is employment of a syringe pump(s) to generate hydrodynamic flow, driving the proteins through the reactors. Here we present a novel approach, using electroosmotic flow (EOF) to electrokinetically pump proteins through a proteolytic system. The existence of EOF in the proteolytic system packed with immobilized trypsin gel beads was proven by imaging the movement of a neutral fluorescent marker. Digestions of proteins were subsequently carried out for 12 min, and the tryptic peptides were analyzed independently using capillary electrophoresis (CE) and MALDI-TOF mass spectrometry (MS). The results from CE analysis of the tryptic peptides from the EOF-driven proteolytic system and a conventional water bath digestion were comparable. MALDI-TOF MS was used to identify the parent protein and the tryptic peptides using MS-Fit database searching. The potential utility of the EOF-driven proteolytic system was demonstrated by direct electro-elution of proteins from an acrylamide gel into the proteolytic system, with elution and tryptic digestion achieved in a single step. The EOF-driven proteolytic system, thus, provides a simple way to integrate protein digestion into an electrophoretic micro total analysis system for protein analysis and characterization.     

Dy3+在Ba3La(BO3)3 中的光致发光

研究了Ba3La(BO3)3 基质中Dy3 的光致发光特性; 探讨了RE3 的电荷半径比(z/r)和Ce3 , Dy3 含量对Dy3 发光强度及发光颜色的影响; 分析了Ba3La(BO3)3 中Ce3 对Dy3 发光的敏化作用; 确定了Dy3 的 4F9/2→6H15/2及4F9/2→6H13/2跃迁发射的浓度猝灭机制均为电偶极-电四极相互作用.     

Coupling properties of imidazole dimer radical cation assisted by embedded water molecule: toward understanding of interaction character of hydrogen-bonded histidine residue side-chains

Geometry optimizations are performed at the DFTB3LYP6-311+G* level. Four intriguing coupling modes, totally eight stable structures are found in the potential energy surfaces of the water-assisted coupling of imidazole dimer radical cation. In these isomers, the water molecules are embedded between two imidazole moieties, and the oxygen atom is tridentate or quadridentate, respectively. The distinct redshifts of the vibrational frequencies of the O-H...N and N-H...O type H bonds indicate the strong interaction of two imidazole rings of respective isomer. Inspection of the highest occupied molecular orbital predicts the alterations of the geometry structures on oxidation and reduction. The low barrier of the fragment rotation demonstrates that the isomerization processes by experiencing the distinct transition states are easy to fulfill, especially for those with O-H...N and C-H...O H bonds. Both the energy difference of the 0 degrees-cis and 180 degrees-trans orientation and the barriers of the fragment rotation are lowered by the water assisting. The range of the zero point vibrational energy correction indicates that the influence on the complexes with N-H...O and O-H...N H bonds (0.13-0.17 kcal/mol) is more significant than those with O-H...N and C-H...O H bonds (+/-0.03 kcal/mol). The dissociation energies of these isomers indicate that the charges transfer easily through water in the dissociation process and then are distributed mainly over the imidazole ring connecting with water molecule. The isomer with proton transfer between imidazole fragments is the most stable one.     

Kinetic Monte Carlo simulations of nucleation and growth in electrodeposition

Nucleation and growth during bulk electrodeposition is studied using kinetic Monte Carlo (KMC) simulations. Ion transport in solution is modeled using Brownian dynamics, and the kinetics of nucleation and growth are dependent on the probabilities of metal-on-substrate and metal-on-metal deposition. Using this approach, we make no assumptions about the nucleation rate, island density, or island distribution. The influence of the attachment probabilities and concentration on the time-dependent island density and current transients is reported. Various models have been assessed by recovering the nucleation rate and island density from the current-time transients.     

Pseudolarolides O and P,Two Novel Triterpene Dilactones from Pseudolarix kaempferi

Pseudolarolides O ( 1 ) and P ( 2 ), two novel triterpenoids with a cycloartane‐type framework, were isolated from the seeds of Pseudolarix kaempferi Gord. (Pinaceae). Their structures were elucidated as (16R,23S,25R)‐16,23‐epoxy‐3,4 : 9,10‐disecocycloartan‐1(10),9(11)‐diene‐3(4),26(23)‐diolide ( 1 ), and (9S,16R,23S,25R)‐1,9 : 16,23‐diepoxy‐8,9 : 9,10‐disecocycloartan‐1(29),5(6),10(19)‐triene‐3(4),26(23)‐diolide ( 2 ), respectively, on the basis of spectroscopic techniques and X‐ray‐diffraction studies.     

SYNTHESIS OF A NOVEL "MESOGEN-JACKETED LIQUID CRYSTAL POLYMER" BASED ON VINYLTEREPHTHALIC ACID

Poly{2, 5- bis [ (p- methoxyphenyl ) oxycarbonyl] styrene } was successfully syn-thesized. This new polymer has a structure characteristic of mesogen-jacketed liquidcyrstalline polymers (MJLCPs) and does form a liquid crystal phase above its glass tran-sition. It thus became the starting member of a new series of MJLCPs. The synthesis ofthe polymer as well as the liquid crystalline properties of the polymer and its monomerwas discussed. A brief comparison of the new monomer and polymer with some previouslyreported counterparts was also included.     

Chloride substitution of [CpRu(dppf)Cl] with sulfur-containing ligands

The reactions of CpRu(dppf)Cl (1) with the sulfur-containing ligands, thiophenol HSPh, 2-mercaptopyridine C₅H₄N(SH), thiourea SC(NH₂)₂, vinylene trithiocarbonate SCS(CH)₂S and ethylene trithiocarbonate SCS(CH₂)₂S, yielded chloro-substituted derivatives, viz. the mono-ruthenium(II) complexes CpRu(dppf)(SPh) (2), [CpRu(dppf)(SC₅H₄NH)]BPh₄ (3)BPh₄, [CpRu(dppf)(SC(NH₂)₂]PF₆ (4)PF₆, [CpRu(dppf)(SCS(CH)₂S)]Cl (5)Cl and [CpRu(dppf)(SCS(CH₂)₂S)]Cl (6)Cl, respectively. Treatment of 1 with AuCl(SMe₂) in the presence of NH₄PF₆ gave [(CpRu(dppf)(SMe₂)]PF₆ (7)PF₆. The reaction of 1 or 6 with SnCl₂ resulted in cleavage of chloro and dithiocarbonate ligands, respectively, to give CpRu(dppf)SnCl₃ (8). All complexes were spectroscopically characterized and the structures of 2 and cationic complexes 4-7 were determined by single-crystal diffraction analyses.     

Synthesis, characterization, photoluminescence and electroluminescence properties of new 1,3,4-oxadiazole-containing rhenium（I） complex Re（CO）3（Bphen）（PTOP）

A new 1,3,4-oxadiazole-contanining rhenium(I) complex,with the formula [Re(CO)_3(Bphen)(PTOP)],(Bphen=bathophe- nardine,PTOP=4-(5-p-tolyl-1,3,4-oxadiazd-2-yl)pyridine),is synthesized and characterized by elemental analysis,IR,~1H NMR, UV-vis and luminescence spectroscopy.The double-layer electroluminescence devices based on the Re(I) complex have been fabricated by spin-coating technique.The turn-on voltage,maximum efficiency,and brightness for green emission obtained from the devices are 9V,2.1cd/A and 165cd/m~2,respectively.