Heterodimerization of olefins. 1. Hydrovinylation reactions of olefins that are amenable to asymmetric catalysis

Through a systematic examination of ligand and counterion effects, new protocols for a nearly quantitative and highly selective codimerization of ethylene and various functionalized vinylarenes have been discovered. In a typical reaction, 4-bromostyrene and ethylene undergo codimerization in the presence of 0.0035 equiv each of [(allyl)NiBr]2, triphenylphosphine, and AgOTf in CH2Cl2 at -56 degrees C to give 3-(4-bromophenyl)-1-butene in >98% yield and selectivity. Corresponding reactions with [(allyl)PdX]2 are much less efficient and less selective and may require further optimization before a viable system can be identified. Another useful protocol that gives comparable yield and selectivity involves the use of a single-component catalyst prepared from allyl 2-diphenylphosphinobenzoate, Ni(COD)2, and (C6F5)3B. Recognition of a synergistic relationship between a chiral hemilabile ligand (for example, (R)-2-methoxy-2'-diphenylphosphino-1,1'-binaphthyl, MOP) and a highly dissociated counteranion (BARF or SbF6) in an enantioselective version of the Ni-catalyzed reaction raises the prospects of developing a practical route for the synthesis of 3-arylbutenes. Several pharmaceutically relevant compounds, including widely used 2-arylpropionic acids, can be synthesized from these key intermediates. This reaction appears to be quite general. Synthesis of several new 2-diphenylphosphino-1,1-binaphthyl derivatives, prepared to probe the effect of hemilabile coordination on the efficiency and selectivity of the reaction, are also described.     

Synthesis and Catalytic Application of Homo-bimetallic Metallocene Complexes as Ethylene Polymerization Catalysts

ＩｎｔｒｏｄｕｃｔｉｏｎＩｔｉｓｗｅｌｌｋｎｏｗｎｔｈａｔｍｅｔａｌｌｏｃｅｎｅｓａｃｔｉｖａｔｅｄｗｉｔｈｍｅｔｈｙｌａｌｕｍｉｎｏｘａｎｅ (ＭＡＯ)ａｒｅｈｉｇｈｌｙａｃｔｉｖｅｈｏｍｏｇｅｎｅｏｕｓＺｉｅｇｌｅｒ Ｎａｔｔａｃａｔａｌｙｓｔｓｔｈａｔｐｒｏｄｕｃｅｐｏｌｙｏｌｅｆｉｎｗｉｔｈｃｏｎ ｔｒｏｌｌｅｄｓｔｅｒｅｏｒｅｇｕｌａｒｉｔｙａｎｄｎａｒｒｏｗｍｏｌｅｃｕｌａｒｗｅｉｇｈｔｄｉｓｔｒｉ ｂｕｔｉｏｎ ,1 4 ｈｏｗｅｖｅｒ,ｔｈｅｍｏｌｅｃｕｌａｒｗｅｉｇｈｔｏｆｔｈｅｐｏｌｙｍ…     

二氢茉莉酮酸甲酯的简便合成方法

本文报道二氢茉莉酮酸甲酯的简便合成方法。先由丁二酸和庚酰氯反应得到2-戊基-1,3-环戊二酮(1),再用甲醇醚化1,可得到2-戊基-3-甲氧基-环戊-2-烯酮(2)。2与丙二酸二甲酯反应生成(2-戊基-3-酮-1-环戊烯-)基乙酸甲酮(3)。最后,催化氢化3,便可得到二氢茉莉酮酸甲酯(4)。     

Sorption equilibrium of methanol on new composite sorbents “CaCl<Subscript>2</Subscript>/silica gel”

This paper presents experimental data on methanol sorption on new composite sorbents which consist of mesoporous silica gels and calcium chloride confined to their pores. Sorption isobars and XRD analysis showed the formation of a solid crystalline solvate CaCl₂⋅2MeOH at low methanol uptake, while at higher uptake the formation of the CaCl₂–methanol solution occurred. The solution confined to the silica pores showed the sorption properties similar to those of the CaCl₂–methanol bulk solution. Calorimetric and isosteric analyses showed that the heat of methanol sorption depends on the methanol uptake, ranging from 38±2 kJ/mol for the solution to 81±4 kJ/mol for the solid crystalline phase CaCl₂⋅2MeOH. The above mentioned characterizations allowed the evaluation of the methanol sorption and the energy storage capacities, clearly showing that the optimal applications of these new composite sorbents are the methanol removal from gaseous mixtures, heat storage and sorption cooling driven by low temperature heat.     

Analysis of the effects of catalytic bleaching on cotton

Hydrogen peroxide can be catalyzed to bleach cotton fibers at temperatures as low as 30°C by incorporating dinuclear tri-μ-oxo bridged manganese(IV) complex of the ligand 1,4,7-trimethyl-1,4,7-triazacyclononane (MnTACN) as the catalyst in the bleaching solution. The catalytic system was found to be more selective under the conditions applied than the non-catalytic H₂O₂ system, showing better bleaching performance while causing slightly lower decrease in degree of polymerization (DP) of cellulose. In order to gain fundamental knowledge of the bleach effect on cotton fibers and cellulose as its main component, especially after catalytic bleaching, X-ray Photoelectron Spectroscopy (XPS) was used to study surface chemical effects. The Washburn method was applied to investigate wetting properties, and liquid porosity was used to obtain pore volume distribution (PVD) plots. Parallel analyzes performed on model cotton fabric, i.e. “clean” cotton fabric stained with morin - a pigment regularly found in native cotton fiber, helped to differentiate between pigment oxidation and other bleaching effects produced on the (regular) industrially scoured cotton fabric. Bleaching was not limited to the chemical action but also affected cotton fiber capillary parameters most likely due to the removal of non-cellulosic materials as well as chain-shortened cellulose.     

Adsorption of dyes on activated carbon and graphitic thermal carbon black

The adsorption of a basic dye (Methylene Blue; MB) and an acidic dye (Acid Orange; AO) has been studied on three activated carbons (ACs; FAS, SKD, and BAU) significantly differing in their porous structures and surface concentrations of ion-exchange groups and on graphitic thermal carbon black (GTCB). The effective specific surface area of FAS, SKD, and BAU determined by dye adsorption is, respectively, 60, 50, and 40% of the BET nitrogen adsorption surface area. The MB uptake on ACs and GTCB increases with rising pH, while the AO uptake decreases. Addition of an electrolyte (0.3 M NaCl) virtually does not effect the adsorption of dyes on ACs and GTCB. It is suggested that hydrophobic interactions, and not ionic ones, are the major contributors to the adsorption of dyes on ACs.     

Prompt k 0-factors and relative gamma-emission intensities for the strong non-1/v absorbers 113Cd, 149Sm, 151Eu and 155,157Gd

Prompt k ₀-factors relative to chlorine and relative g-emission intensities were determined for the strong non-1/v absorbers ¹¹³Cd, ¹⁴⁹Sm, ¹⁵¹Eu,¹⁵⁵Gd and ¹⁵⁷Gd. Measurements were performed using the SNU-KAERI prompt gamma activation analysis (PGAA) facility at the Korea Atomic Energy Research Institute (KAERI). For proper experimental determination of the prompt k ₀-factors, the effective g-factor and cadmium ratio were taken into account, in consideration of the effects from the non-1/v capture cross section and neutron spectrum in the thermal and epithermal energy region. By using the actual spectrum of the neutron beam in this study, the effective g-factor was obtained by calculation, and the influence of epithermal neutrons on the capture rate was corrected by measuring the cadmium ratio for each non-1/v target isotope. The measured prompt k ₀-factors were used to check the consistency between the existing dataset of the absolute g-emission intensity and the 2200 m/s capture cross section for these isotopes.     

New computer program to calculate the symmetry of molecules

In this paper we, present some MATLAB and GAP programs and use them to find the automorphism group of the Euclidean graph of the C₈₀ fullerence with connectivity and geometry of I _h symmetry point group. It is proved that this group has order 120 and is isomorphic to I _h ≊Z₂×A₅, where Z₂ is, a cyclic group of order 2 and A₅ is the alternating group on five symbols.     

Decomposition of Gaseous Sulfide Compounds in Air by Pulsed Corona Discharge

The effectiveness of applying a pulsed corona discharge to the destruction of olfactory pollution in air was investigated. This paper presents a comparative study of the decomposition of three representative sulfide compounds in diluted concentrations: hydrogen sulfide (H₂S), dimethyl sulfide (DMS), and ethanethiol (C₂H₅SH), which could be completely removed when a sufficient but reasonable energy density was deposited in the gas. DMS showed the lowest energy cost (around 30 eV/molecules); C₂H₅SH and H₂S had an EC of respectively 45 eV and 115 eV. The efficiency of the non-thermal plasma process increased with decreasing the initial concentration of sulfide compounds, while the energy yield remained almost unchanged. SO₂ was the only identified byproduct of H₂S decomposition, but the sulfur balance suggests the formation of undetected SO₃. The byproducts analyzed during the degradation of DMS and C₂H₅SH enabled to propose a reaction mechanism, starting with radical attack and breaking of C–S bonds.     

Compressed-CO2-assisted patterning of polymers

We report a facile route to pattern polymer surfaces with the aid of compressed CO(2), termed the compressed-CO(2)-assisted imprint method. In this method, compressed CO(2) serves as a plasticizer for polymers (such as poly(methyl methylate) and polystyrene), which leads to a tremendous reduction in the glass transition temperature and viscosity of the polymers. Nylon fabrics and anode aluminum oxide porous membranes are used as molds, respectively, to pattern the softened polymers at relatively low temperatures, resulting in patterns at the scale of micrometers and nanometers on the surface of polymer films. The patterned structures can be tuned by changing CO(2) pressure and temperature in the imprinting process. This method is simple and environmentally benign. It also can be operated at low temperatures, for instance, ambient temperature.