Preparation and Characterization of Ultrafine Rare Earth Molybdenum Complex Oxide Particles

Ultrafine rare earth molybdenum (La–Mo and Ce–Mo) complex oxide particles have been synthesized by the sol–gel process using citric acid as complexing agent. The influence of preparation conditions such as thermal treatment temperature (T), molar ratio of citric acid to metallic ions (L/M), and pH value of the starting solution on the oxide particle size has been studied. The formation of La₂Mo₂O₉and Ce₂Mo₃O₁₂has been investigated using XRD, DTA–TG, FT-IR, TEM, and BET surface area measurements. It is shown that the morphology and structure of the oxide particles are significantly dependent on the preparation conditions. The influence of different preparation methods on the particle size of La–Mo and Ce–Mo oxides is also discussed.     

Studies on fluorescent species of spiro-indolinonaphthooxazines and their fluorescence spectra

Photophysical behavior of spiro[1,3,3-trimethylindolino-2,3′-naphtho[2,1-b]-1,4-oxazine] (SP1) and spiro[1,3,3,2′-tetramethylindolino-2,3′-naphtho[2,1-b]-1,4-oxazine] (SP2) were studied. The fluorescent species and their spectra of SP1 and SP2 in polar solvents (acetonitrile and methanol) and non-polar solvent (cyclohexane) were investigated. The fluorescence decay in polar solvents was studied by picosecond time-correlated single photon counting. In most cases, fluorescence decay obeyed triexponential decay kinetics. The major fluorescent species is an excited intermediate which has similar conformation as its precursor (¹ SP ^*) formed after the bond cleavage between spirocarbon and oxygen in oxazine ring. The effects of molecular structure and solvent polarity on fluorescence spectra and fluorescence decay lifetime were studied.     

通过密度函数理论表征炭质吸附剂的孔径分布

通过密度函数理论（DFT-DensityFunctionalTheory）对炭质吸附剂的孔径分布进行了表征。该法以多孔固体上N2吸附分子模型为依据，用一种方法对多孔固体的孔径分布从微孔到大孔范围进行确定。本文用该法对自制的聚丙烯腈活性炭纤维、国产煤质活性炭及日本产活性炭微球等六种炭质吸附剂的孔径分布进行了表征。     

K-Mo基催化剂的表面酸性与其合成醇选择性

对500℃和800℃焙烧制得的氧化态K－MoO3／γ－AlO3，K－MoO3／SiO2及非负载K－Mo催化剂进行硫化后，测试其合成醇活性．结果表明500℃焙烧制得的负载型催化剂显示较高的合成低碳烃活性和较低的合成低磷醇选择性，经800℃焙烧后，合成低磷醇的选择性大幅度提高．500℃焙烧的非负载K－Mo催化剂显示较高的合成醇选择性，经800℃焙烧后，促碳醇的选择性保持不变．用氨的吸附及TPD方法测定了各样品的酸性，并与催化剂活性对照，发现催化剂酸性越强，酸量越大，则其合成醇选择性越低．催化剂上的乙醇分解实验证实，催化剂的酸量大小与它的醇分解活性成正变关系，这些结果说明催化剂酸性对其合成醇性能有直接的影响．     

Simultaneous determination of Co(II), Cr(VI), Ni(II) and Pb(II) in water by solvent extraction and high-field 1H NMR Spectrometry

A novel analytical approach is described that combines the preconcentration power of solvent extraction with the resolution and sensitivity of a 500 MHz ¹H NMR spectroscopic detection method for the quantitative determination of metals. Co(II), Cr(VI), Ni(II) and Pb(II) in water are extracted into chloroform as dithiocarbamate complexes. By decoupling the protons and employing a solvent-induced shift method, the ¹H NMR spectrum containing the dithiocarbamate complexes of Co(II), Cr(VI), Ni(II) and Pb(II) is fully resolved at CDCl₃/ C₆D₆ below 40%/60%. The detection limits for Co(II), Cr(VI), Ni(II) and Pb(II) are estimated to be 0.12, 0.073, 0.11 and 0.27 μg/mL, respectively, in the sample solution. Received: 31 July 1997 / Revised: 24 October 1997 / Accepted: 31 October 1997     

Study on analysis of153Sm-EDTMP stability in vitro and vivo by HPLC

The behavior of¹⁵³Sm-EDTMP in vitro and vivo is analyzed by the size exclusion HPLC. The experimental results show that EDTMP amounts have an obvious effect on the stability in vitro and uptake of¹⁵³Sm-EDTMP in the liver. HPLC analysis of urine sample indicates that¹⁵³Sm-EDTMP es excreted in the original form. The behavior in vivo of¹⁵³Sm-EDTMP containing 4 μg is similar to that of¹⁵³Sm-EDTMP containing 50 μg EDTMP at 1 h post-injection.     

A unique reaction pathway of fluorine-substituted ethyl groups on Cu(111): successive alpha,alpha-fluoride elimination

Fluorine-substituted ethyl groups on Cu(111) were generated by thermal scission of the C-I bond in the adsorbed C2F5I. Temperature-programmed reaction spectrometry observed a novel pathway resulting in the evolution of C4F6 above 400 K. Among the various isomers, this product was identified as hexafluro-2-butyne. Although abstraction of two fluorine atoms from the starting Cu-CF2CF3 was required, Cu-CCF3 (trifluoroethylidyne) was favored over Cu-CF=CF2 (trifluorovinyl) as the intermediate because this ethyl-ethylidyne-butyne pathway was suppressed on a Cu(100) surface devoid of the key threefold hollow binding sites for ethylidyne. Once formed, perfluoroethylidyne readily coupled to afford a tightly surface-bound hexafluoro-2-butyne up to 400 K. Therefore, the C-F bonds adjacent to the metal were found to be more susceptible to the bond activation, leading the chemisorbed perfluoroethyl to eliminate two F atoms successively from the alpha-carbon. This preference for alpha-elimination rather than beta-elimination (the most favorable route in hydrocarbons) may be quite general for metal surface-mediated reactions involving fluorinated alkyl groups.     

水热法合成Ce0.67Zr0.33O0.2固溶体研究

采用两种不同前驱体通过水热法合成了Ce0.67Zr0.33O0.2固溶体,并通过XRD,BET,TPR等手段考察了样品的相结构,比表面及还原特性.结果表明,在180℃,12 h的水热条件下,以共沉淀产物为前驱体所制得的Ce0.67Zr0.33O0.2固溶体比表面积较高,但存在一定程度的相分离;以凝胶产物为前驱体制得的Ce0.67Zr0.33O0.2固溶体结构更完整,具有良好的还原特性及热稳定性.     

HETEROAROMATIC POLYMERS—HIGH TEMPERATURE POLYPYRROLONES DERIVED FROM 2,6-BIS(3'''',4''''-DIAMINOPHENYL)-4-BIPHENYLPYRIDINE AND VARIOUS AROMATIC DIANHYDRIDES

A new type of aromatic tetraamine containing biphenyl moiety in the side chain was synthesized via a modified Chichibabin's reaction.3-Nitro-4-acetamidoacetophenone was reacted with 4-phenyl benzaldehyde in the presence of ammonium acetate to obtain 2,6-bis(3',4'-diaminophenyl)-4-biphenyl pyridine(DPPA).A series of polypyrrolones(PPys) were prepared using tetraamine and various aromatic dianhydrides via a two-step cyclization procedure.All the PPys show excellent high temperature stabilities with the initial decomposition temperatures of 530-549℃ and residual weight ratio of 49%-80% at 750℃ in nitrogen.The polymers exhibit no apparent glass transition temperatures(T_gs)except PPy-1 (T_g=327℃),which is derived from tetraamine DPPA and 2,2-bis[4-(3',4'-dicarboxyphenoxy)-phenyl]propane dianhydride (BPADA).In addition,the polymers have acceptable mechanical properties with the tensile strength of 65-94 MPa.The PPy films show excellent hydrolysis-resistance in alkaline aqueous medium and could maintain most of the properties even after boiling in 10% aqueous sodium hydroxide solution for a week.