Reliability tests for Weibull distribution with variational shape parameter based on sudden death lifetime data

In the traditional design of reliability tests for assuring the mean time to failure (MTTF) in Weibull distribution with shape and scale parameters, it has been assumed that the shape parameter in the acceptable and rejectable populations is the same fixed number. For the purpose of expanding applicability of the reliability testing, Hisada and Arizono have developed a reliability sampling scheme for assuring MTTF in the Weibull distribution under the conditions that shape parameters in the both populations do not necessarily coincide, and are specified as interval values, respectively. Then, their reliability test is designed using the complete lifetime data. In general, the reliability testing based on the complete lifetime data requires the long testing time. As a consequence, the testing cost becomes sometimes expensive. In this paper, for the purpose of an economical plan of the reliability test, we consider the sudden death procedure for assuring MTTF in Weibull distribution with variational shape parameter.     

Fabrication of well‐aligned electrospun nanofibrous membrane based on fluorinated polyimide

We have fabricated novel nanofibrous fluorinated polyimide membranes on a specially designed collector, which is composed of conductive aluminum plates and glass insulator materials and can be removed from the apparatus, using an electrospinning method. We describe the structure and water flux properties of the nanofibrous fluorinated polyimide membranes. The electrospun nanofibers were deposited across the plates and uniaxially aligned to the collector. In addition, the multi‐layer stacked nanofibrous membranes, consisting of three‐dimensionally ordered nanopores, were produced. The pure water fluxes for the stacked membranes were measured, using a stirred dead‐end filtration cell, and were linearly decreased with an increasing deposition time, indicating that the nanopores formed in the nanofibrous membrane were further narrowed due to the regularly accumulated nanofibers. Copyright © 2009 John Wiley & Sons, Ltd.     

Tomographic implementation of astronomical speckle imaging from bispectra

A bispectral method for astronomical speckle imaging utilizes an average speckle bispectrum of an object to derive its Fourier phase. There has been, however, a problem in conventional bispectral algorithm owing to difficulty in processing bispectral data in a four-dimensional (4D) space. In this paper, we propose an implementation to overcome this problem, where a one-dimensional (1D) object projection is reconstructed from a two-dimensional (2D) average bispectrum of speckle projections, and object projections so obtained at various angles are then tomographically combined into a 2D object image. In this tomographic approach, processes are separable into those for individual projection angles, implying that bispectral data required to be stored at a time are from 4D to 2D and computation time can be substantially reduced by parallelizing angle-by-angle processes. We have performed experiments using simulated and observed data, and have demonstrated the feasibility of the present approach with an achievable accuracy comparable to that of a conventional approach.     

Investigation of void formation beneath thin AlN layers by decomposition of sapphire substrates for self-separation of thick AlN layers grown by HVPE

Void formation at the interface between thick AlN layers and (0 0 0 1) sapphire substrates was investigated to form a predefined separation point of the thick AlN layers for the preparation of freestanding AlN substrates by hydride vapor phase epitaxy (HVPE). By heating 50–200 nm thick intermediate AlN layers above 1400 °C in a gas flow containing H₂ and NH₃, voids were formed beneath the AlN layers by the decomposition reaction of sapphire with hydrogen diffusing to the interface. The volume of the sapphire decomposed at the interface increased as the temperature and time of the heat treatment was increased and as the thickness of the AlN layer decreased. Thick AlN layers subsequently grown at 1450 °C after the formation of voids beneath the intermediate AlN layer with a thickness of 100 nm or above self-separated from the sapphire substrates during post-growth cooling with the aid of voids. The 79 μm thick freestanding AlN substrate obtained using a 200 nm thick intermediate AlN layer had a flat surface with no pits, high optical transparency at wavelengths above 208.1 nm, and a dislocation density of 1.5×10⁸ cm⁻².     

Rhenium complex-catalyzed acylative cleavage of ethers with acyl chlorides

It was found that rhenium complex was an efficient catalyst for the acylative cleavage of C-O bond of ethers with acyl chlorides. When acyclic ethers were allowed to react with acyl chlorides in the presence of a catalytic amount of ReBr(CO)₅, acylative cleavage of C-O bond of acyclic ethers smoothly proceeded to give the corresponding esters in moderate to good yields. Similarly, cyclic ethers were acylative cleaved by acyl chlorides to give the corresponding chloro substituted esters in good yields by the use of Re₂O₇ catalyst.     

Silver-catalyzed regioselective carbomagnesiation of alkynes with alkyl halides and Grignard reagents

A silver-catalyzed carbomagnesiation of alkynes with alkyl halides and Grignard reagents afforded alkenyl Grignard reagents regioselectively, where the alkyl group of the alkyl halide, but not that of the Grignard reagent, was introduced into the alkyne. Application to δ-haloalkylacetylenes yielded cyclopentanes or a tetrahydrofuran containing an exo-methylene substituent via 5-exo-dig cyclization.     

Distribution of phospholipid molecular species in autogenous access grafts for hemodialysis analyzed using imaging mass spectrometry

Arteriovenous fistulae (AVF) using vein grafts are frequently used for vascular access in hemodialysis. When superficial veins are used as autogenous access grafts for hemodialysis, atherosclerotic-like tissue degeneration often causes stenosis and obstruction. Although the differences between the pathology of degeneration in AVF and atherosclerosis (i.e., peripheral artery occlusive disease (PAD)) are known, their underlying molecular mechanisms are not. We determined the characteristic abnormal lipid metabolism of AVF. Oil red O staining clearly showed the accumulation of lipid molecules in AVF and PAD tissues. We found that the staining pattern was different between AVF and PAD tissues. The media and adventitia of AVF and the intima and media of PAD were intensely stained. Quantitative lipid analysis revealed that the amount of PL was significantly increased in AVF and PAD. Next, we performed matrix-assisted laser desorption/ionization imaging mass spectroscopy and determined the characteristic distribution of lysophosphatidylcholine (LPC) and phosphatidylcholine (PC) in AVF. The distribution patterns of LPC (1-acyl 16:0) and PC (diacyl 16:0/20:4) were consistent with the Oil red O staining images, suggesting that metabolisms related to LPC (1-acyl 16:0) and PC (diacyl 16:0/20:4) are altered in AVF.     

Formation of a silicato complex of zinc in aqueous solution and its accelerating effect on the formation of silica scales in cooling water systems

This study elucidates the effect of zinc (Zn), which is an anticorrosive water additive, on the formation of silica scales from cooling water. In these experiments, the silica scales were analyzed by EPMA, and the results indicate that Zn is sorbed into the silica scales during formation. Measurements of the solubility of Zn(OH)(2) at various concentrations of silicic acid demonstrate that Zn is present as a silicato complex of Zn (SCZ) in cooling water. From adsorption experiments of the SCZ on silica and alumina, which are major components of the silica scales, it can be concluded that the SCZ accelerates the formation of silica scales from cooling water.     

Experimental assessment of quasi-binary picture of thermotropics: induced smectic A phase in 7CB-n-heptane system

Quasi-binary (QB) picture of thermotropics, which regards a neat thermotropic liquid crystal as a binary system consisting of (semi)rigid core and molten alkyl chain, was assessed experimentally for the most famous (and representative) thermotropic mesogenic series nCB. By adding n-heptane as solvent, the smectic A phase was induced in 7CB-n-heptane system. Small angle x-ray diffraction showed that the QB picture holds not only in the phase behavior but also in the structure. It is suggested that the melting of 8CB and 9CB to isotropic liquid via smectic and nematic liquid crystals can be understood as a thermotropic-lyotropic crossover.