原位氧化Zn3N2制备P型ZnO薄膜的性能研究

采用射频反应溅射法在玻璃衬底上制备Zn3N2薄膜,然后向真空室中通入纯氧气进行热氧化制备ZnO薄膜.利用X射线衍射、扫描电子显微镜、霍尔效应测量、透射光谱和光致发光光谱等表征技术,研究了氧化温度和氧化时间对ZnO薄膜的结晶质量、电学性质和光学性能的影响.研究结果显示,450℃下氧化2h后的样品中除含有ZnO外,还有Zn3N2成分,500℃下氧化2h可以制备出电阻率为0.7Ωcm,空穴载流子浓度为1017cm-3,空穴迁移率为0.9cm2/Vs的具有c轴择优取向的p型ZnO薄膜.此时的ZnO薄膜具有良好的光学特性,紫外可见光范围内透过率为85%,处于紫外区域的激子复合产生的发光峰很强,且半高宽较窄,而处于可见光部分来自于深能级发射的绿色发光峰很弱.这种工艺制备的ZnO薄膜质量较好,有利于实现在短波长光电器件方面的应用.     

准相位匹配PPKTP晶体连续倍频13 mW绿光输出

采用高压脉冲电场极化,通过电光效应实时监控、倍频通光二维监控等手段的应用,制备出周期为9μm、长为8 mm、宽为3 mm、厚为1 mm的周期极化KTiOPO4晶体(PPKTP);倍频通光实验中,当波长1064 nm的基频光功率为1 W时,得到了功率为13.5 mW的532 nm连续倍频绿光输出,单通倍频转换效率为1.35%,归一化转换效率为1.69%/(W.cm),接近理论最大值。     

Peritectic phase growth in directionally solidified Cu-70% Sn alloy

The growth mechanism of the peritectic η phase involving the peritectic reaction and peritectic transformation in Cu-70%Sn alloy was investigated under directional solidification. The results show that a major growth mechanism in thickening of the peritectic η-layer is not the peritectic reaction but the peritectic transformation. The transformation temperature and isothermal time play crucial roles in determining the volume fraction and the thickness of the peritectic η phase. With the increase of the temperature and isothermal time, the volume fraction of the peritectic η phase increases. The regressed data show that the relationship between the thickness of η phase (Δx) and the transformation temperature (T) meets the following equation In Δx=6.5−1673 1 / T. Additionally, there exists a relationship between the thickness of the η phase (Δx) and the isothermal time (t) at the 9 mm solidification distance below the peritectic reaction interface, Δx=0.72t ^1/2, which is consistent with the theoretical model. Supported by the National Science Foundation of China (Grant No. 50395102)     

基于多级微反射镜的傅里叶变换红外光谱仪中准直误差的分析

通过对基于多级微反射镜的空间调制傅里叶变换红外光谱仪准直误差的分析,模拟了准直误差的存在而导致的干涉图大光程差处对比度反转和光谱图边频噪声的产生。讨论了在不同的误差系数下复原光谱图的信噪比和分辨率,并且分析了干涉图大光程差处对比反转以及光谱图边频分量的产生原因。仿真结果表明,在误差系数α=0.15°.mm-1时,光谱的信噪比会下降到6 dB,同时光谱分辨率会退化到13.4cm-1。本文的结论将应用于微型光谱仪系统的光学设计与装调。     

Studies on the mechanisms of powerful terahertz radiations from laser plasmas

A survey on the mechanisms of powerful terahertz (THz) radiation from laser plasmas is presented.Firstly,an analytical model is described,showing that a transverse net current formed in a plasma can be converted into THz radiations at the plasma oscillation frequency.This theory is applied to explain THz generation in a gas driven by two-color laser pulses.It is also applied to THz generation in a tenuous plasma driven by a chirped laser pulse,a few-cycle laser pulse,a DC/AC bias electric field.These are well verified by particle-in-cell simulations,demonstrating that THz radiations produced in these approaches are nearly single-cycles and linear polarized.In the chirped laser scheme and the few-cycle laser scheme,THz radiations with the peak field strength of tens of MV/cm and the peak power of gigawatt can be achieved with the incident laser intensity less than 10 17 W/cm 2.     

Diode-pumped Nd:LGS intracavity-doubled green laser at 532 nm

It is reported that efficient continuous-wave (CW) green laser generation at 532 nm in a KTP crystal at type-II phase matching direction performed with a diode-pumped Nd:LGS laser. With incident pump power of 18.2 W, output power of 2.68 W at 532 nm has been obtained using a 5 mm-long KTP crystal. The optical conversion efficiency was up to 14.7%. At the output power level of 2.68 W, the output stability is better than 3.5%. The beam quality M ² values were equal to 1.33 and 1.19 in X and Y directions, respectively.     

Assembly,characterization, and photocatalytic activities of TiO<Subscript>2</Subscript> nanotubes/CdS quantum dots nanocomposites

The semiconductor quantum dots (QDs) can be very efficient to tune the response of photocatalyst of TiO₂ to visible light. In this study, CdS QDs formed in situ with about 8 nm have been successfully deposited onto the surfaces of TiO₂ nanotubes (TNTs) to form TNTs/CdS QDs nanocomposites by use of a simple bifunctional organic linker, thiolactic acid. The diffuse reflectance spectroscopy (DRS) spectra of as prepared samples showed that the absorption edge of the TNTs/CdS composite is extended to visible range, with absorption edge at 530 nm. The photocatalytic activity and stability of TNTs/CdS were also evaluated for the photodegradation of rhodamine B. The results showed that when TNTs/CdS QDs was used, photocatalytic degradation of RhB under visible light irradiation reached 91.6%, higher than 45.4 and 30.5% for P25 and TNTs, respectively. This study indicated that the TNTs/CdS QDs nanocomposites were superior catalysts for photodegradation under visible light irradiation compared with TNTs and P25 samples, which may find wide application as a powerful photocatalyst in environmental field.     

Surface plasmon tunneling through a touching gold nanocylinder array on a thin gold film

The optical property of a structure composed of a touching gold nanocylinder array on a thin gold film is investigated using finite-difference time-domain (FDTD) method. It is discovered that the transmission behavior can be tuned by tuning the geometry of the structure. As the film thickness increases, the transmission mode associated with the localized surface plasmon resonance blue shifts accompanied with a decrease of magnitude and full width at half maximum, and a second transmission appear due to the interaction of the plasmons on the cylinder with their images induced on the film. The localized waveguide resonance diminishes but the second resonance peak is intensified and broadened noticeably with the separation of the cylinder array and film increase. The cylinder radius size influences the localized surface plasmon resonance mode obviously. These results may be helpful for the design of a novel optical device.     

All-solid-state Nd:Gd<Subscript>0.18</Subscript>Y<Subscript>0.82</Subscript>VO<Subscript>4</Subscript>-LBO green laser at 532 nm

We report a continuous-wave (CW) coherent green radiation at 532 nm by intracavity frequency doubling generation of 1064 nm Nd:Gd_0.18Y_0.82VO₄ laser. With incident pump power of 18.2 W, output power of 1.08 W at 532 nm has been obtained using a 5 mm-long KTP crystal. The optical conversion efficiency was up to 5.9%. At the output power level of 1.08 W, the output stability is better than 5%. The beam quality M² values were equal to 1.26 and 1.12 in X and Y directions, respectively.     

Effect of low level laser irradiation on the proliferation of myoblasts—the skeletal muscle precursor cells: an experimental in vitro study

The aim of this paper is to study the effect of low-level laser irradiation (LLLI) on proliferation of myoblasts in culture. Myoblasts derived from rat skeletal muscle were irradiated by He-Ne laser with different doses. Compared with nonirradiated control group, the number of myoblasts increased when the cells in normal culture conditions were exposed to the laser of specific energy density. The amount of cells with proliferating cell nuclear antigen (PCNA) positive expression and the 5-bromo-2′-deoxyuridine (BrdU) incorporation rate after laser irradiation were also higher than that of the control group, suggesting that LLLL at certain doses can effectively enhance myoblasts growth activity in vitro. This study firstly demonstrated that stimulating myoblasts to enter into proliferative stage from initial resting state was an important mechanism of regeneration and repair of injured skeletal muscle promoted by LLLI in clinical treatment.