Porous particle superstructures of about 15 nm diameter, consisting of ultrasmall nanoparticles of iridium and iridium dioxide, are prepared through the reduction of sodium hexachloridoiridate(+IV) with sodium citrate/sodium borohydride in water. The water-dispersible porous particles contain about 20 wt % poly(N-vinylpyrrolidone) (PVP), which was added for colloidal stabilization. High-resolution transmission electron microscopy confirms the presence of both iridium and iridium dioxide primary particles (1–2 nm) in each porous superstructure. The internal porosity (≈58 vol%) is demonstrated by electron tomography. In situ transmission electron microscopy up to 1000 °C under oxygen, nitrogen, argon/hydrogen (all at 1 bar), and vacuum shows that the porous particles undergo sintering and subsequent compaction upon heating, a process that starts at around 250 °C and is completed at around 800 °C. Finally, well-crystalline iridium dioxide is obtained under all four environments. The catalytic activity of the as-prepared porous superstructures in electrochemical water splitting (oxygen evolution reaction; OER) is reduced considerably upon heating owing to sintering of the pores and loss of internal surface area. 相似文献
Dynamical properties of acyl chains in the three polymorphic phases alpha, beta', and beta of tristearin [C(3)H(5)(OCOC(17)H(35))3] have been studied by means of incoherent quasielastic neutron scattering (IQNS) using selectively deuterated samples. The mean square displacement of hydrogen atoms, , was estimated from the scattering vector Q dependence of the elastic scattering component under the harmonic approximation. It was shown that the temperature dependence of was significantly different between the three phases. There was no marked difference in between these phases up to 193 K, and the value increased linearly with temperature. Although the beta phase remained linear up to 293 K, the alpha and beta' phases started to show a nonlinear increase around 200 K, suggesting an anharmonic nature of molecular motions. The alpha phase exhibited the most conspicuous temperature dependence. These characteristics were ascribable to the difference in the lateral packing of acyl chains. Compared with the beta phase which has a tightly packed T// subcell, the beta' and alpha phases have looser O perpendicular and H subcells, respectively. The molecular motion in the alpha phase was analyzed using the model of uniaxial rotational diffusion in a onefold cosine potential. It has been clarified that the rotational fluctuation about the chain axis in the alpha phase is rather restricted compared with that in the rotator phase of n-alkanes. 相似文献
We tuned the electronic properties of single wall carbon nanotube (SWCNT) with intercalation of naphthalene derivatives (NDs) having different electron donor or acceptor property in the SWCNT bundles. Characterization of the adsorbed SWCNT with Raman spectroscopy and electrical conductivity measurement clearly indicate the charge transfer interaction of ND molecules with SWCNT. Also X-ray diffraction supports the intercalation of ND molecules in the interstitial spaces and groove sites of SWCNT bundle. Intercalation of ND molecules enhances remarkably the CO2 adsorptivity, which can be ascribed to the key importance of the interaction of the quadrupole moment of CO2 with the local electrical field on the SWCNT induced by the charge transfer interaction. 相似文献
Abstract. Photodimerization of thymine in aqueous solution in the presence of tyrosine was studied with monochromatic UV irradiation. The total dimer formation was sensitized in the presence of tyrosine. The action spectrum of sensitized total dimer formation has a peak near 280 nm corresponding to the absorption maximum of tyrosine. Triplet quenchers reduced the sensitization substantially. It seems probable that tyrosine-sensitized photodimerization of thymine occurred via triplet-triplet energy transfer from tyrosine to thymine. 相似文献
Journal of Radioanalytical and Nuclear Chemistry - Instrumental photon activation analysis (IPAA) is nondestructive and multi-elemental analysis method like instrumental neutron activation... 相似文献
We studied the stepwise formation constants (β) of water-soluble diglycolamide (DGA) and dioxaoctanediamide (DOODA) for the mutual separation of Ln in a solvent extraction system. TODGA (N,N,N?,N?-tetraoctyl-diglycolamide) and DOODA(C8) (N,N,N?,N?-tetraoctyl-dioxaoctanediamide) exhibit opposite behaviors in extracting both light and heavy Ln through Ln-patterns. Metal complexes of two- and three-folding with water-soluble DOODA and DGA, respectively, were found, and each β value was calculated using distribution ratios. Taking β, their distribution ratio, D, and separation factor, SF, values into consideration, the suitable separation conditions (aqueous phase: 30 mM DOODA(C2) in 1 M HNO3; organic phase: 0.1 M TODGA in n-dodecane) of multistage extraction (10?×?10 extraction using aqueous and organic phases, including one sample solution) were determined. In this study, La, Pr, and Nd were mainly present in the aqueous phase, whereas Sm–Dy existed in the organic phase. Although these two groups can be easily separated into two phases, the resolution, Rs, values provide for little mutual separation between La–Nd and Sm–Dy under the present conditions.
In order to obtain clear scintigrams of small animals, some improvements were brought on a pinhole collimator. Then, using a human gamma camera with this collimator improved, bone scintigraphy was attempted in the rat mandible and maxilla, experimentally to examine the desirable conditions of scintigraphy. The most desirable bone scan images were obtained under the conditions that the pinhole was 1.5 mm in diameter, the distance between the collimator and the object was 0 cm, and the exposure was 400. 相似文献
This paper reports the development of a treatment system, using animal chitin as a passive biosorbent, for removing U(VI) from aqueous waste streams. An integral part of this system is a model that provides for the optimization of the treatment system through simulation of U(VI) removal efficiency based on the characteristics of the influent waste stream. The model accounts for changing solution matrix conditions through the coupling of surface complexation and mass transfer models. Complexation of U(VI) by chitin surface sites was modeled using FITEQL. Application of FITEQL in the “forward” mode provided the sorbed and aqueous phase concentrations needed for the mass transfer model. The mass transfer model was derived for both batch and continuously stirred tank reactor (CSTR) configurations using Fick's Law, reactor mass balances and rate law expressions. The coupled model was successfully validated using CSTR data at pH 6.5 and rate constants determined from batch sorption experiments. The CSTR configuration yields a steady-state, eighty percent U(VI) removal for 1 μM influent U(VI) with a solution-phase pH of 6.5 and 3.9 g l−1 chitin. 相似文献
A spin probe TEMPOL (4-hydroxy-2,2,6,6-tetramethylpiperidinyl-1-oxy) was dissolved in a tetraethyl orthosilicate sol-gel reaction
system and measured by electron spin resonance spectroscopy at 295 K. The nitrogen hyperfine coupling constant was from 1.64–1.66
mT in the sol-gel solutions. The values were sensitive to the ethanol-to-water ratio of the solutions. The hyperfine coupling
constant in the xerogels was 1.70 mT, which was almost the same as that in water, indicating that the probe molecules were
trapped in silica pores with water adsorbed on the silica surfaces. The motion of TEMPOL in the xerogels was considerably
slower than in the sol-gel solutions. The local viscosity estimated was from 70–90 cP. The ESR spectra of TEMPOL were altered
during the sol-gel process, indicating that adsorbed water on the silicas surfaces has an important role for trapping organic
molecules in sol-gel glasses. 相似文献
Efficient activation of CO2 at low temperature was achieved by reverse water–gas shift via chemical looping (RWGS-CL) by virtue of fast oxygen ion migration in a Cu–In structured oxide, even at lower temperatures. Results show that a novel Cu–In2O3 structured oxide can show a remarkably higher CO2 splitting rate than ever reported. Various analyses revealed that RWGS-CL on Cu–In2O3 is derived from redox between Cu–In2O3 and Cu–In alloy. Key factors for high CO2 splitting rate were fast migration of oxide ions in the alloy and the preferential oxidation of the interface of alloy–In2O3 in the bulk of the particles. The findings reported herein can open up new avenues to achieve effective CO2 conversion at lower temperatures.Efficient activation of CO2 at low temperature was achieved by reverse water–gas shift via chemical looping (RWGS-CL) by virtue of fast oxygen ion migration in a Cu–In structured oxide, even at lower temperatures.相似文献