Metal-containing initiator systems. IV. Polymerization of methyl methacrylate by systems of some activated metals and organic halides

A study of the polymerization of methyl methacrylate initiated by the binary systems of some activated metals and organic halides has been made. It was found that the initiator activities of these systems were greatly dependent on the kind and the preparation or activation method of the metals (i.e., oxidation potential, surface area, and purity), and also on the kind of organic halides (i.e., bond-dissociation energy of their carbon–halogen bonds). From the kinetic studies of the polymerization at 60°C with the system reduced nickel–carbon tetrachloride, the rate of polymerization was found to be proportional to the monomer concentration and to the square root of concentration of both nickel and carbon tetrachloride at the lower concentration range of carbon tetrachloride, indicating that the system induced the radical polymerization. A similar conclusion was also obtained from the copolymerization with styrene with this system at 60°C, i.e., the resulting copolymer composition curve was in agreement with that obtained with azobisisobutyronitrile (AIBN). The apparent overall activation energy for the methyl methacrylate polymerization with this system was estimated to be 7.5 kcal/mole, which was considerably lower than that with AIBN. On the basis of the results obtained, an initiation mechanism for the polymerization with these initiator systems is presented and discussed.     

A study of novel heat-resistant polymers: Preparation of photosensitive fluorinated polybenzoxazole precursors and physical properties of polybenzoxazoles derived from the precursors

A series of novel photosensitive polybenzoxazole precursors were prepared from polycondensation of 2,2-bis(3,3′-amino-4,4′-hydroxyphenyl)hexafluoropropane with photosensitive dicarboxylic acid chlorides such as p-phenylenediacryloyl chloride and benzophenone-4,4′-dicarboxylic chloride. The precursors are soluble in common organic solvents owing to the presence of perfluoromethyl groups in the chain structure, and insolubilized in the solvents on irradiation with the light. Polybenzoxazole patterns with high resolution as well as high aspect ratio were reproduced by baking the precursor patterns at 300°C. The pattern shrinkage on the conversion to polybenzoxazole was slight. The polybenzoxazole films offered good heat-resistance up to 400°C in addition to good electrical properties.     

Structure reinvestigation of gelsemoxonine,a constituent of Gelsemium elegans,reveals a novel,azetidine-containing indole alkaloid

[structure: see text] The structure of gelsemoxonine, isolated from Gelsemium elegans Benth., was revised to be a novel oxindole alkaloid having an azetidine unit. A new alkaloid, 14,15-dihydroxygelsenicine, which was presumed to be a biosynthetic precursor of gelsemoxonine, was also isolated.     

The diazocarbene (CNN) molecule: characterization of the X 3Sigma- and A 3Pi electronic states

The ground (X (3)Sigma(-)) and first excited triplet (A (3)Pi) electronic states of diazocarbene (CNN) have been investigated systematically starting from the self-consistent-field theory and proceeding to the coupled cluster with single, double, and full triple excitations (CCSDT) method with a wide range of basis sets. While the linear X (3)Sigma(-) ground state of CNN has a real degenerate bending vibrational frequency, the A (3)Pi state of CNN is subject to the Renner-Teller effect and presents two distinct real vibrational frequencies along the bending coordinate. The bending vibrational frequencies of the A (3)Pi state were evaluated via the equation-of-motion coupled cluster (EOM-CC) techniques. The significant sensitivity to level of theory in predicting the ground-state geometry, harmonic vibrational frequencies, and associated infrared intensities has been attributed to the fact that the reference wave function is strongly perturbed by the excitations of 1pi-->3pi followed by a spin flip. At the highest level of theory with the largest basis set, correlation-consistent polarized valence quadruple zeta (cc-pVQZ) CCSDT, the classical X-A splitting (T(e) value) was predicted to be 68.5 kcal/mol (2.97 eV, 24 000 cm(-1)) and the quantum mechanical splitting (T(0) value) to be 69.7 kcal/mol (3.02 eV, 24 400 cm(-1)), which are in excellent agreement with the experimental T(0) values, 67.5-68.2 kcal/mol (2.93-2.96 eV, 23 600-23 900 cm(-1)). With the EOM-CCSD method the Renner parameter (epsilon) and averaged bending vibrational frequency (omega(2)) for the A (3)Pi state were evaluated to be epsilon=-0.118 and omega(2)=615 cm(-1), respectively. They are in fair agreement with the experimental values of epsilon=-0.07 and nu(2)=525 cm(-1).     

Cobaltporphyrin‐adsorbed carbon black: highly efficient electrocatalysts for oxygen reduction

meso‐Substituted cobalt porphyrins adsorbed on carbon black were prepared as catalysts for the electroreduction of O₂. The catalyst, which was prepared by using a homogenizer in mixing cobalt tetraethylporphyrin and carbon black, gave rise to electroreduction of O₂ at a remarkably positive potential (E_p = 0.45 V versus saturated calomel electrode (SCE)) and showed a high selectively for the four‐electron reduction (n = 3.8). Electrochemical study and extended X‐ray absorption fine structure (EXAFS) analysis revealed that the adsorbed face‐to‐face dimeric aggregates of cobalt porphyrin molecules were highly efficient catalysts for electroreduction of O₂. Copyright © 2005 John Wiley & Sons, Ltd.     

Photoinduced face-inversion of conjugated tetraene ligands on a Pd-Pd-Pd moiety

The linear sandwich tripalladium complexes [Pd3{Ar(CH=CH)4Ar}2[BArf]2 (Ar = Ph, p-t-Bu-C6H4, p-styryl-C6H4) undergo photoinduced isomerization involving face-inversion of the tetraene ligands. Irradiation of these complexes with visible light (>510 nm) resulted in rac (staggered sandwich) to meso (eclipsed sandwich) isomerization. The structures of rac and meso isomers are determined by X-ray crystallographic analyses.     

Bildung von Fe3S4?FeS2 durch hydrothermale Reaktion

A mixture of Fe₃S₄ (greigite) and FeS₂ (pyrite) is formed at 200°C on hydrothermal treatment of freshly precipitated iron sulphide. Its electron diffraction diagramm was recorded, which corresponded to an incomplete solid solution of Fe₃S₄ and FeS₂. The surface and the interior of the spherical particles of the samples (size about 500 Å) consisted of Fe₃S₄ and FeS₂, respectively.     

Alstonia scholaris: Struktur des Indolalkaloides Narelin

Alstonia scholaris: The structure of the indole alkaloid nareline Besides the known akuammidine, picralinal, picrinine and pseudoakuammigine a new indole alkaloid called nareline (M=352) was isolated from Alstonia scholaris R. BR. , which belongs to the plant family of Apocynaceae. Its structure 2 was deduced by single crystal X-ray diffraction. 2 represents the absolute configuration. The spectroscopic data of 2 and its derivatives (Scheme 1) as well as their chemical behavior support this structure. In biogenetic sense nareline is related to the bases akuammiline ( 4 ) and picraline ( 5 ) (Scheme 2). In contrast to those the C-atom 5 is exocyclic and represents an aldehyde group which forms together with the oxygen atom of the N (4)-hydroxylamine group a cyclic half acetale. - By oxidation (CrO₃/CH₃COOH) of 2 the oxindol derivative 19 (oxonareline) is formed which contains a cyclic acetal as a partial structure element (Scheme 4).     

Optical sensor for carbon dioxide combining colorimetric change of a pH indicator and a reference luminescent dye

A new optical CO₂ sensor based on the luminescence intensity change of the europium(III) complex tris(thenoyltrifluoroacetonato) europium(III) dihydrate ([Eu(tta)₃]) caused by the absorption change of various pH indicators—thymol blue, phenol red, or cresol red—with CO₂ was developed and its CO₂ sensing properties were investigated. For all the CO₂ sensors using pH indicators the observed luminescence intensity from [Eu(tta)₃] at 613 nm increased with increasing CO₂ concentration. The linear calibration method based on the plot of (I₁₀₀–I₀)/(I–I₀) versus the inverse of CO₂ concentration was suggested, where I₀ and I₁₀₀ were luminescence intensities at 613 nm of the CO₂ sensor film in 100% nitrogen and 100% gaseous CO₂. In all cases the plots showed good linearity and the correlation factors of the plots, r², were 0.991 for thymol blue, 0.990 for phenol red, and 0.998 for cresol red. The slopes of the plots (A/B) for thymol blue, phenol red, and cresol red were 2.2, 5.2, and 9.0%, respectively. The response times of the CO₂ sensor film were 4.0 s for thymol blue, 4.4 s for phenol red, and 8.8 s for cresol red for switching from nitrogen to CO₂, and the recovery times of films were 36 s for thymol blue, 39.2 s for phenol red, and 56.6 s for cresol red for switching from CO₂ to nitrogen. The signal changes were fully reversible and hysteresis was not observed during the measurements. The highly sensitive CO₂ sensor was developed using thymol blue as an indicator for the CO₂-sensing probe.     

Tandem base-promoted ring-opening/Brook rearrangement/allylic alkylation of O-silyl cyanohydrins of beta-silyl-alpha,beta-epoxyaldehyde: scope and mechanism

Metalated O-silyl cyanohydrins of beta-silyl-alpha,beta-epoxyaldehyde have been found to serve as functionalized homoenolate equivalents by a tandem sequence involving base-promoted ring opening of the epoxide, Brook rearrangement, and alkylation of the resulting allylic anion. On the basis of mechanistic studies involving competitive experiments using the diastereomeric cyanohydrins, we propose a reaction pathway involving a silicate intermediate 36 formed by a concerted process via an anti-opening of the epoxide followed by the formation of an O-Si bond.