Relaxations of selenium in crystalline and amorphous states

Complex shear modulus at 33 kc./sec. is measured at temperatures of ?150–150°C. for amorphous selenium and crystalline selenium with different crystallinities. The dielectric relaxation at 10 kc./sec. to 3 kc./sec. to 3 Mc./sec. is observed at temperatures of ?32–25°C. for iodine-doped crystalline selenium. It is concluded from the results of this study and of others' that selenium exhibits four relaxations, α, β γ, and δ, in order of descending temperature. The β relaxation is observed only in the amorphous sample above the glass temperature and is assigned to the primary relaxation. The α, γ, and δ relaxations are found in the crystalline selenium. The α relaxation, which is prominent in a highly crystalline sample, is assigned to the crystalline relaxation. The γ and δ relaxations increase in peak height with decreasing crystallinity and are attributed to the disordered region in the crystalline selenium. The dispersion map (logarithm of frequency versus reciprocal absolute temperature of loss maximum) of selenium is presented.     

Separation and simultaneous determination of cobalt, nickel and copper with 2-(4-methyl-2-quinolylazo)-5-diethylaminophenol by reversed-phase high-performance liquid chromatography

Performance of six quinolylazo compounds was studied as a pre-column derivatizing reagent for the separation of metal ions in the reversed-phase high-performance liquid chromatography. 2-(4-Methyl-2-quinolylazo)-5-diethylaminophenol (QADP) was suited for the determination of Co, Ni and Cu in the presence of a large amount of Fe. The detection limits under the optimized conditions [stationary phase: L-column ODS; mobile phase: acetone-water (62:38, v/v) containing 0.01 M NH(4)SCN and 0.01 M 2-morpholinoethanesulfonic acid-NaOH (pH 6); injection volume: 10 mul] were 0.24 ng for Co, 0.22 for Ni and 0.53 for Cu. This method was successfully applied to the determination of these metal ions in a standard steel sample.     

Molecular design of crown ethers. 21.(1,2) synthesis of novel double-armed benzo-15-crown-5 lariats and their complexation thermodynamics with light lanthanoid nitrates in acetonitrile

Three new disubstituted benzo-15-crown-5 derivatives (3-5) have been synthesized from 4',5'-bis(bromomethyl)benzo-15-crown-5 (2) and the corresponding alkanols in the presence of Na(2)S(2), and their complexation thermodynamics with light lanthanoid(III) nitrates (La-Gd) have been studied in anhydrous acetonitrile at 25 degrees C. Plots of K(S) against the reciprocal ionic diameter of lanthanoid exhibited monotonically declining pattern for the parent benzo-15-crown-5 (1) and 3 but showed a characteristic peak at Ce(3+) for 4 and 5. It is interesting to note that the simple extension of the alkyl side chains in 4 and 5 can alter the cation selectivity profiles of 1 and 3. Possessing two 2-oxapropyl groups, 3 gave a comparable K(S) for La(3+) but a significantly decreased K(S) for Ce(3+) compared with the corresponding values for 1, thus exhibiting an exceptionally high La(3+)/Ce(3+) selectivity of 11. Thermodynamically, the complexation of lanthanoid perchlorates with 1 is absolutely entropy-driven in acetonitrile, while the complexation of lanthanoid nitrates with 3-5 is primarily driven by exothermic enthalpy changes with accompanying moderate entropic gain or small entropic loss.     

Effect of dose rate on the radiation-induced polymerization of ethylene in tert-butyl alcohol

The dependence of the dose rate on the rate of radiation-induced polymerization of ethylene in tert-butyl alcohol containing 5 vol-% water was studied. The reaction was carried out by use of a reactor with a capacity of 100 ml under the following conditions: pressure, 200 kg/cm²; temperature, 24 ± 3°C; dose rate, 3.7 × 10⁴?1.6 × 10⁵ rad/hr; amount of medium, 70 ml. The dose rate exponents for rate of the polymerization, the molecular weight, and the number of polymer chain were found to be about 0.8, ?0.1, and 0.9, respectively. These results were well explained with kinetic results (obtained by a novel analytical method) for the polymerization which contain both first-order and second-order terminations for the concentrations of propagating radical. The individual values of the rate constants in each elementary reaction were also obtained.     

Aqueous phase behavior of a 1-O-phytanyl-beta-D-xyloside/water system. Glycolipid-based bicontinuous cubic phases of crystallographic space groups Pn3m and Ia3d

Temperature- and concentration-dependent aqueous phase diagram of a novel alkylglycoside, 1-O-phytanyl-beta-D-xyloside (beta-Xyl(Phyt)), was studied using small-angle X-ray scattering, polarizing optical microscopy, and differential scanning calorimetry. The phases found in this system include an Lc phase, an Lalpha phase, an HII phase, two inverted cubic phases of crystallographic space groups Pn3m and Ia3d, and a fluid isotropic phase, FI. The phase diagram of the beta-Xyl(Phyt)/water system is similar to that for the 1-monooleylglycerol (MO)/water system, suggesting that the phase behavior is largely determined by the overall molecular shape rather than the details of surfactant molecular structure. Moreover, the structural parameters of the beta-Xyl(Phyt) liquid crystals are also similar to those of the MO/water, due primarily to the similar molecular dimensions of two molecules. As compared to the MO/water system, however, the beta-Xyl(Phyt)/water system displays a lower value of TK ( approximately 8.(5) degrees C) and a wider temperature window for the mesophases (8.(5)-120 degrees C). Moreover, beta-Xyl(Phyt) is chemically more robust than MO, as the ether linkage is more stable against hydrolysis than the ester linkage and the phytanyl chain is fully saturated.     

Unusual Reactivities of ortho-Hydroxy-β-nitrostyrene

Nitrostyrene derivatives are widely used in organic syntheses as a substrate for Michael addition, photoisomerization and cycloaddition. In contrast, ortho-hydroxy derivatives exhibit unusual behaviors in these reactions. Conjugate addition proceeded upon treatment of the ortho-hydroxy-β-nitrostyrene with an amine; however, subsequent C–C bond cleavage readily occurred to afford the corresponding imine. Moreover, conversion of the trans-isomer to a cis-isomer did not occur efficiently, even when UV light was irradiated. We studied these unusual behaviors of β-nitrostyrene, focusing on the role of the ortho-hydroxy group.     

Umwandlung des Fe3S4 von Fd3m nach Pa3, P4/nmm bzw. P63/mmc beim hydrothermalen Prozeß

A hydrothermal process of precipitating iron sulfide gives rise to greigite (space group: Fd3m), pyrite (Pa3), mackinawite (P4/nmm) and pyrrhotite (P6/mmc), as the case may be. Greigite blended with pyrite is formed, when the autoclave for the hydrothermal process is cooled down not rapidly, but slowly from 192°C to room temperature. Greigite and pyrite here form partially a solid solution. A mechanical mixture of greigite-mackinawite and that of greigite-pyrrhotite appear in the hydrothermal process above and below 192°C, respectively. Pure greigite is produced only by rapid quenching of the reaction tube from 192°C, to 10°C.     

Development of high resolution resonance ionization mass spectrometry for trace analysis of 93mNb

⁹³Nb(n, n′)^93mNb reaction allows retrospective estimation of integrated fast neutron dose in nuclear reactor. We proposed isomer-selective trace analysis of ^93mNb by Resonance Ionization Mass Spectrometry (RIMS) combined with a gas-jet atomic source and an injection locked Ti:Sapphire laser system operated at several kHz. Resonant ionization spectroscopy of Nb in gas-jet using Ti:Sapphire laser was demonstrated.     

An ASE Reduction Filter Using Cascaded Optical Fiber Grating Couplers in EDFA Repeater

A new configuration for an ASE reduction filter in EDFA repeaters for WDM optical transmission systems using optical fiber grating couplers (FGCs) was proposed and first demonstrated. The filtering characteristics of the proposed filter for amplified single wavelength signal and 2-channel WDM signals using EDFA were identified. It was found that the filter was effective to improve SNR in optical domain by reducing ASE noise. The required FGC characteristics for the filter were theoretically predicted under the condition that the total filter loss did not exceed 3 dB. More than 70% of drop efficiency was required in each FGC for the application of the proposed filter to an 8-channel WDM system using EDFA repeaters.     

Achievement of a 920-MHz high resolution NMR

We have developed a 920-MHz NMR system and performed the proton NMR measurement of H(2)O and ethylbenzene using the superconducting magnet operating at 21.6 T (920 MHz for proton), which is the highest field produced by a superconducting NMR magnet in the persistent mode. From the NMR measurements, it is verified that both homogeneity and stability of the magnet have a specification sufficient for a high resolution NMR.