A water-soluble precursor of BaTiO3 and transparent BaTiO3 thin-films prepared from the solution by a water-based dip-coating technique

A new water-soluble precursor of BaTiO₃ was prepared from citratoperoxotitanate and barium citrate as the Ti and Ba sources, respectively. The water-soluble precursor was easily solved in water to form a stable solution, which produced BaTiO₃ by heat-treatment at 500 °C and above. A water-based dip-coating technique demonstrated a potential application as the coating solution of BaTiO₃. Transparent BaTiO₃ films were formed on the quartz-glass substrates with an increment of typically 9 nm per coating with 0.05 mol dm^?3 solution. The transmittance of the 180 nm-thick film attained almost 90 % at the maximum and the overall transmittance was above 60 % over the visible region. The polycrystalline film was composed of BaTiO₃ grains smaller than 200 nm. Although the film was an insulator, it was not suited for the dielectric application because of the structural problems due to the relatively low density and the thinness of the BaTiO₃ layer. The BaTiO₃ pellet obtained from the water soluble precursor by condensation, pyrolysis and sintering showed the good dielectric properties with ε_r = 3,500 and tan δ = 0.027 with a sintering temperature of 1,375 °C.     

Speciation of arsenic trioxide metabolites in blood cells and plasma of a patient with acute promyelocytic leukemia

Arsenic trioxide (As₂O₃) has been widely accepted as the second-best choice for the treatment of relapsed and refractory acute promyelocytic leukemia (APL) patients. However, a few studies have been conducted on a detailed speciation of As₂O₃ metabolites in blood samples of patients. To clarify the speciation of arsenic, the blood samples were collected at various time points from a patient with APL after remission induction therapy and during consolidation therapy. The total amounts of arsenic in blood cells and plasma, and the plasma concentrations of inorganic arsenic and methylated metabolites were determined by inductively coupled plasma mass spectrometry (ICP-MS) and high-performance liquid chromatography/ICP-MS, respectively. The total amounts of arsenic in the blood cells were 4–10 times higher than those in plasma. Among all arsenic metabolites, the pentavalent arsenate (As^V) in plasma was more readily eliminated. During the drug-withdrawal period, the initial plasma concentrations of trivalent arsenic (As^III) declined more rapidly than those of methylarsonic acid and dimethlyarsinic acid, which are known as the major methylated metabolites of As^III. On the other hand, during the consecutive administration in the consolidation therapy period, the plasma concentrations of total arsenic and arsenic metabolites increased with time. In conclusion, these results may support the idea that methylated metabolites of As₂O₃ contribute to the efficacy of arsenic in APL patients. These results also suggest that detailed studies on the pharmacokinetics as well as the pharmacodynamics of As₂O₃ in the blood cells from APL patients should be carried out to provide an effective treatment protocol. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users. Presented at the 4th International Conference on Trace Element Speciation in Biomedical, Nutritional and Environmental Sciences, 25–29 May 2008, Munich-Neuherberg, Germany.     

Regulation of π-stacked anthracene arrangement for fluorescence modulation of organic solid from monomer to excited oligomer emission

The construction and precise control of the face-to-face π-stacked arrangements of anthracene fluorophores in the crystalline state led to a remarkable red shift in the fluorescence spectrum due to unprecedented excited oligomer formation. The arrangements were regulated by using organic salts including anthracene-1,5-disulfonic acid (1,5-ADS) and a variety of aliphatic amines. Because of the smaller number of hydrogen atoms at the edge positions and the steric effect of the sulfonate groups, 1,5-ADS should prefer face-to-face π-stacked arrangements over the usual edge-to-face herringbone arrangement. Indeed, as the alkyl substituents were lengthened, the organic salts altered their anthracene arrangement to give two-dimensional (2D) edge-to-face and end-to-face herringbone arrangements, one-dimensional (1D) face-to-face zigzag and slipped stacking arrangements, a lateral 1D face-to-face arrangement like part of a brick wall, and a discrete monomer arrangement. The monomer arrangement behaved as a dilute solution even in the close-packed solid state to emit deep blue light. The 1D face-to-face zigzag and slipped stacking of the anthracene fluorophores caused a red shift of 30-40?nm in the fluorescence emission with respect to the discrete arrangement, probably owing to ground-state associations. On the other hand, the 2D end-to-face stacking induced a larger red shift of 60?nm, which is attributed to the excimer fluorescence. Surprisingly, the brick-like lateral face-to-face arrangement afforded a remarkable red shift of 150?nm to give yellow fluorescence. This anomalous red shift is probably due to excited oligomer formation in such a lateral 1D arrangement according to the long fluorescence lifetime and little shift in the excitation spectrum. The regulation of the π-stacked arrangement of anthracene fluorophores enabled the wide modulation of the fluorescence and a detailed investigation of the relationships between the photophysical properties and the arrangements.     

Asymmetric synthesis of chiral 9,10-dihydrophenanthrenes using Pd-catalyzed asymmetric intramolecular Friedel-Crafts allylic alkylation of phenols

We developed a novel asymmetric synthetic method for multisubstituted 9,10-dihydrophenanthrenes based on the Pd-catalyzed asymmetric intramolecular Friedel-Crafts allylic alkylation of phenols, which produces 10-vinyl or 10-isopropenyl chiral 9,10-dihydrophenanthrene derivatives in high yield with up to 94% ee.     

Epitaxial growth of boron-doped graphene by thermal decomposition of B4C

We grew graphene by thermal decomposition of B(4)C and investigated its features by high-resolution transmission electron microscope observations. At temperatures higher than 1600 °C in a vacuum, B(4)C decomposes and graphene forms epitaxially on its surface. The number and the morphology of the graphene layers depend on the surface orientation. An electron diffraction technique revealed the presence of a superstructure with a two-times larger unit cell, which is consistent with the structure of BC(3). We have directly confirmed boron in the graphene layers by electron energy loss spectroscopy measurements and boron-mapping experiments.     

Chiral bis(imidazolidine)pyridine-cu complex-catalyzed enantioselective [3+2]-cycloaddition of azomethine imines with propiolates

[3+2] Cycloaddition of azomethine imines with electron-deficient terminal alkynes was smoothly catalyzed by a chiral bis(imidazolidine)pyridine-CuOAc complex to give bicyclic pyrazolo[1,2-a]pyrazolone derivatives with up to 74% ee.     

Time-domain observation of the spinmotive force in permalloy nanowires

The spinmotive force associated with a moving domain wall is observed directly in Permalloy nanowires using real time voltage measurements with proper subtraction of the electromotive force. Whereas the wall velocity exhibits nonlinear dependence on magnetic field, the generated voltage increases linearly with the field. We show that the sign of the voltage reverses when the wall propagation direction is altered. Numerical simulations explain quantitatively these features of spinmotive force and indicate that it scales with the field even in a field range where the wall motion is no longer associated with periodic angular rotation of the wall magnetization.     

The reductive amination of aldehydes and ketones by catalytic use of dibutylchlorotin hydride complex

The reductive amination of aldehydes or ketones using Ph(2)SiH(2) or PhSiH(3) has been effectively promoted by the direct use of Bu(2)SnClH-pyridine N-oxide as a catalyst; this method has advantages in terms of its mild conditions and wide application to various carbonyls and amines, including aliphatic examples.     

STM studies on the reconstruction of the Ni2P (101̅0) surface

The surface structure of Ni₂P (101?0), a model for highly active hydrodesulfurization catalysts, was studied using scanning tunneling microscopy (STM) and low energy electron diffraction (LEED) in order to understand the reconstruction of the surface layers. Annealing at 573 K revealed a (1 × 1) LEED pattern which changed to a c(2 × 4) arrangement by further heating to 723 K. Atomic scale STM images were obtained for both the (1 × 1) and c(2 × 4) structures. Bright spots observed in the STM images were interpreted to be due to surface phosphorus atoms and this was supported by a density functional theory (DFT) simulation. Several possible models for the c(2 × 4) reconstructed structures were proposed including a P-dimer defect model, a missing-row model and a missing-row + added-row model. The last model gave the best explanation for the c(2 × 4)structure. The mechanism for the c(2 × 4) reconstruction on the Ni₂P (101?0) surface is discussed.     

Novel tandem reaction of benzyne with cyclic ethers and active methines: synthesis of ω-trichloroalkyl phenyl ethers

The reaction of benzenediazonium carboxylate with chloroform in refluxing tetrahydrofuran afforded 5,5,5-trichloropentyl phenyl ether in 61% yield along with benzoic acid (7%). When dichloroacetonitrile was used as a reactant, 5,5-dichloro-5-cyanopentyl phenyl ether was obtained in 65% yield. Reactive benzyne derived from diazonium carboxylate initially reacted with THF to give a dipole intermediate, which further reacted with chloroform or dichloroacetonitrile to give ring opened products.