Channelled Porous TiO2 Synthesized with a Water‐in‐Oil Microemulsion

Porous titanium dioxide synthesized with a bicontinuous surfactant template is a promising method that leads to a high active surface area electrode. The template used is based on a water/isooctane/dioctyl sodium sulfosuccinate salt together with lecithin. Several parameters were varied during the synthesis to understand and optimize channel formation mechanisms. The material is patterned in stacked conical channels, widening towards the centre of the grains. The active surface area increased by 116 % when the concentration of alkoxide precursors was decreased and increased by 241 % when the template formation temperature was decreased to 10 °C. Increasing the oil phase viscosity tends to widen the pore aperture, thus decreasing the overall active surface area. Changing the phase proportions alters the microemulsion integrity and disrupts channel formation.     

Single‐Crystal‐like Nanoporous Spinel Oxides: A Strategy for Synthesis of Nanoporous Metal Oxides Utilizing Metal‐Cyanide Hybrid Coordination Polymers

Development of a new method to synthesize nanoporous metal oxides with highly crystallized frameworks is of great interest because of their wide use in practical applications. Here we demonstrate a thermal decomposition of metal‐cyanide hybrid coordination polymers (CPs) to prepare nanoporous metal oxides. During the thermal treatment, the organic units (carbon and nitrogen) are completely removed, and only metal contents are retained to prepare nanoporous metal oxides. The original nanocube shapes are well‐retained even after the thermal treatment. When both Fe and Co atoms are contained in the precursors, nanoporous Fe?Co oxide with a highly oriented crystalline framework is obtained. On the other hand, when nanoporous Co oxide and Fe oxide are obtained from Co‐ and Fe‐contacting precursors, their frameworks are amorphous and/or poorly crystallized. Single‐crystal‐like nanoporous Fe?Co oxide shows a stable magnetic property at room temperature compared to poly‐crystalline metal oxides. We further extend this concept to prepare nanoporous metal oxides with hollow interiors. Core‐shell heterostructures consisting of different metal‐cyanide hybrid CPs are prepared first. Then the cores are dissolved by chemical etching using a hydrochloric acid solution (i.e., the cores are used as sacrificial templates), leading to the formation of hollow interiors in the nanocubes. These hollow nanocubes are also successfully converted to nanoporous metal oxides with hollow interiors by thermal treatment. The present approach is entirely different from the surfactant‐templating approaches that traditionally have been utilized for the preparation of mesoporous metal oxides. We believe the present work proves a new way to synthesize nanoporous metal oxides with controlled crystalline frameworks and architectures.     

Mesoporous Silica Particles as Topologically Crosslinking Fillers for Poly(N‐isopropylacrylamide) Hydrogels

Here it is demonstrated that mesoporous silicas (MPSs) can be used as effective “topological crosslinkers” for poly(N‐isopropylacrylamide) (PNIPA) hydrogels to improve the mechanical property. Three‐dimensional bicontinuous mesporous silica is found to effectively reinforce the PNIPA hydrogels, as compared to nonporous silica and two‐dimensional hexagonally ordered mesoporous silica.     

Well‐Defined Iron Complexes as Efficient Catalysts for “Green” Atom‐Transfer Radical Polymerization of Styrene,Methyl Methacrylate,and Butyl Acrylate with Low Catalyst Loadings and Catalyst Recycling

Environmentally friendly iron(II) catalysts for atom‐transfer radical polymerization (ATRP) were synthesized by careful selection of the nitrogen substituents of N,N,N‐trialkylated‐1,4,9‐triazacyclononane (R₃TACN) ligands. Two types of structures were confirmed by crystallography: “[(R₃TACN)FeX₂]” complexes with relatively small R groups have ionic and dinuclear structures including a [(R₃TACN)Fe(μ‐X)₃Fe(R₃TACN)]⁺ moiety, whereas those with more bulky R groups are neutral and mononuclear. The twelve [(R₃TACN)FeX₂]_n complexes that were synthesized were subjected to bulk ATRP of styrene, methyl methacrylate (MMA), and butyl acrylate (BA). Among the iron complexes examined, [{(cyclopentyl)₃TACN}FeBr₂] ( 4 b ) was the best catalyst for the well‐controlled ATRP of all three monomers. This species allowed easy catalyst separation and recycling, a lowering of the catalyst concentration needed for the reaction, and the absence of additional reducing reagents. The lowest catalyst loading was accomplished in the ATRP of MMA with 4 b (59 ppm of Fe based on the charged monomer). Catalyst recycling in ATRP with low catalyst loadings was also successful. The ATRP of styrene with 4 b (117 ppm Fe atom) was followed by precipitation from methanol to give polystyrene that contained residual iron below the calculated detection limit (0.28 ppm). Mechanisms that involve equilibria between the multinuclear and mononuclear species were also examined.     

Self‐Replication and Amplification of Enantiomeric Excess of Chiral Multifunctionalized Large Molecules by Asymmetric Autocatalysis

Self‐replication of large chiral molecular architectures is one of the great challenges and interests in synthetic, systems, and prebiotic chemistry. Described herein is a new chemical system in which large chiral multifunctionalized molecules possess asymmetric autocatalytic self‐replicating and self‐improving abilities, that is, improvement of their enantioenrichment in addition to the diastereomeric ratio. The large chiral multifunctionalized molecules catalyze the production of themselves with the same structure, including the chirality of newly formed asymmetric carbon atoms, in the reaction of the corresponding achiral aldehydes and reagent. The chirality of the large multifunctionalized molecules controlled the enantioselectivity of the reaction in a highly selective manner to construct multiple asymmetric stereogenic centers in a single reaction.     

Electrical Network of Single‐Crystalline Metal Oxide Nanoclusters Wired by π‐Molecules

In a mixed‐valence polyoxometalate, electrons are usually delocalized within the cluster anion because of low level of inter‐cluster interaction. Herein, we report the structure and electrical properties of a single crystal in which mixed‐valence polyoxometalates were electrically wired by cationic π‐molecules of tetrathiafulvalene substituted with pyridinium. Electron‐transport characteristics are suggested to represent electron hopping through strong interactions between cluster and cationic π‐molecules.     

Rhodium-Catalyzed Highly Diastereo- and Enantioselective Synthesis of a Configurationally Stable S-Shaped Double Helicene-Like Molecule

An S-shaped double helicene-like molecule (>99 % ee), possessing stable helical chirality, has been synthesized by the rhodium(I)/difluorphos complex-catalyzed highly diastereo- and enantioselective intramolecular double [2+2+2] cycloaddition of a 2-naphthol- and benzene-linked hexayne. The collision between two terminal naphthalene rings destabilizes the helical chirality of the S-shaped double helicene-like molecule, but the introduction of two additional fused benzene rings significantly increases the configurational stability. Thus, no epimerization and racemization were observed even at 100 °C. The enantiopure S-shaped double helicene-like molecule forms a trimer through the multiple C−H⋅⋅⋅π and C−H⋅⋅⋅O interactions in the solid-state. The trimers stack to form columnar packing structures, in which neighboring stacks have opposite dipole directions. The accumulation of helical structures in the same direction in the S-shaped double helicene-like molecule enhanced the chiroptical properties.     

Solvent-Vapor-Induced Reversible Single-Crystal-to-Single-Crystal Transformation of a Triphosphaazatriangulene-Based Metal–Organic Framework

A triphosphaazatriangulene (H₃L) was synthesized through an intramolecular triple phospha-Friedel–Crafts reaction. The H₃L triangulene contains three phosphinate groups and an extended π-conjugated framework, which enables the stimuli-responsive reversible transformation of [Cu(HL)(DMSO)⋅(MeOH)]_n, a 3D-MOF that exhibits reversible sorption characteristics, into (H₃L⋅0.5 [Cu₂(OH)₄⋅6 H₂O] ⋅4 H₂O), a 1D-columnar assembled proton-conducting material. The hydrophilic nature of the latter resulted in a proton conductivity of 5.5×10⁻³ S cm⁻¹ at 95 % relative humidity and 60 °C.     

Total synthesis of (S)-(+)-ent-phomapyrones B and surugapyrone B

Phomapyrone B ( 1 ), the 2-pyrones isolated from the phytopathogenic fungus Leptosphaeria maculans, has been synthesized as the enantiomeric form starting from (S)-2-methylbutanol ( 4 ). Surugapyrone B ( 3 ) isolated from Streptmyces sp. USF-6280 as an antioxidant has also been synthesized as a natural form. The absolute configuration of phomapyrone B ( 1 ) was estimated to be the (R)-form and that of surugapyrone B ( 3 ) being the (S)-form. A series of 2-pyrone derivatives 17 have been synthesized through the established procedure and their DPPH radical-scavenging activities have also been evaluated.