Synthesis of Molecular Wires of Linear and Branched Bis(terpyridine)‐Complex Oligomers and Electrochemical Observation of Through‐Bond Redox Conduction

Films of linear and branched oligomer wires of Fe(tpy)₂ (tpy=2,2′:6′,2′′‐terpyridine) were constructed on a gold‐electrode surface by the interfacial stepwise coordination method, in which a surface‐anchoring ligand, (tpy? C₆H₄N?NC₆H₄? S)₂ ( 1 ), two bridging ligands, 1,4‐(tpy)₂C₆H₄ ( 3 ) and 1,3,5‐(C?C? tpy)₃C₆H₃ ( 4 ), and metal ions were used. The quantitative complexation of the ligands and Fe^II ions was monitored by electrochemical measurements in up to eight complexation cycles for linear oligomers of 3 and in up to four cycles for branched oligomers of 4 . STM observation of branched oligomers at low surface coverage showed an even distribution of nanodots of uniform size and shape, which suggests the quantitative formation of dendritic structures. The electron‐transport mechanism and kinetics for the redox reaction of the films of linear and branched oligomer wires were analyzed by potential‐step chronoamperometry (PSCA). The unique current‐versus‐time behavior observed under all conditions indicates that electron conduction occurs not by diffusional motion but by successive electron hopping between neighboring redox sites within a molecular wire. Redox conduction in a single molecular wire in a redox‐polymer film has not been reported previously. The analysis provided the rate constant for electron transfer between the electrode and the nearest redox‐complex moiety, k₁ (s^?1), as well as that for intrawire electron transfer between neighboring redox‐complex moieties, k₂ (cm² mol^?1 s^?1). The strong effect of the electrolyte concentration on both k₁ and k₂ indicates that the counterion motion limits the electron‐hopping rate at lower electrolyte concentrations. Analysis of the dependence of k₁ and k₂ on the potential gave intrinsic kinetic parameters without overpotential effects: k₁⁰=110 s^?1, k₂⁰=2.6×10¹² cm² mol^?1 s^?1 for [n Fe 3 ], and k₁⁰=100 s^?1, k₂⁰=4.1×10¹¹ cm² mol^?1 s^?1 for [n Fe 4 ] (n=number of complexation cycles).     

Transformation of Cinchona alkaloids into 1-N-oxide derivatives by endophytic Xylaria sp isolated from Cinchona pubescens

The microbial transformation of four Cinchona alkaloids (quinine, quinidine, cinchonidine, and cinchonine) by endophytic fungi isolated from Cinchona pubescens was investigated. The endophytic filamentous fungus Xylaria sp. was found to transform the Cinchona alkaloids into their 1-N-oxide derivatives.     

Electrical conducting and magnetic properties of (ethylenedithiotetrathiafulvalenothioquinone-1,3-diselenolemethide)2.FeBr4 (GaBr4) crystals with two different interlayer arrangements of donor molecules

Two donor molecules newly synthesized, dimethylthio- and ethylenedithio-tetrathiafulvalenothioquinone-1,3-diselenolemethides (1 and 2), were used to prepare their charge-transfer (CT) salts with a magnetic FeBr(4)(-) counteranion. For 1, a low electrical conducting 1:1 salt (1.FeBr(4)) was obtained, in which molecules of 1 are tightly dimerized in a one-dimensional (1D) stacking column. On the other hand, 2 gave a 2:1 salt (2(2).FeBr(4)) as two different kinds of plate crystals (I and II). Both I and II possess similar stacking structures of molecules of 2 in each 1D column with a half-cut pipelike structure along the c axis. However, for I, the stacking columns are aligned in the same direction along the a and b axes, while for II they are in the same direction along the a axis, but in the reverse direction along the b axis, resulting in the difference in the relative arrangement of molecules of 2 and FeBr(4)(-) ions between the two crystals. The room-temperature electrical conductivities of the single crystals of I and II were 13.6 and 12.7 S cm(-)(1), respectively. The electrical conducting behavior in I was metallic above 170 K but changed to be semiconducting with a very small activation energy of 7.0 meV in the temperature range 4-170 K. In contrast, II showed the semiconducting behavior in the whole temperature range 77-285 K. The corresponding nonmagnetic GaBr(4)(-) salts with almost the same crystal structure as I and II showed definitively different electrical conducting properties in the metal to semiconductor transition temperature in I as well as in the magnitude of activation energy in the semiconducting region of I and II. The interaction between the d spins of FeBr(4)(-) ions was weak and antiferromagnetic in both I and II, but the magnitude of the spin interaction was unexpectedly larger compared with that in the FeBr(4)(-) salt of the corresponding sulfur derivative of 2 with closer contact between the neighboring FeBr(4)(-) ions. These electrical conducting and magnetic results suggest a significant interaction between the conducting pi electrons and the d spins of FeBr(4)(-) ions located near the columns or layers.     

Measurements of short-lived cosmogenic nuclides in rain samples

Summary Extremely low activity levels of cosmic ray induced nuclides have been measured in freshly precipitated rainwater by quick chemical separation coupled with ultra low background gamma-spectrometry. The nuclides detected were ³⁸S (T_1/2 = 2.83 h)-³⁸Cl (37.2 m), ³⁹Cl (55.6 m), ²⁴Na (14.96 h), ²⁸Mg (20.9 h), ⁷Be (53.3 d) and ²²Na (2.602 y). The number of atoms in rain water were evaluated to be ranging from 400-1900 l^-1 for ³⁹Cl (n = 6, mean: 1200), 30-1500 l^-1 for ²⁴Na (n = 16, mean: 520), 80-600 l^-1 for ²⁸Mg (n = 13, mean: 260), 1 ^. 10⁶-4 ^. 10⁷ l^-1 for 7Be (n = 16, mean: 7 ^. 10⁶) and 2 ^. 10³-1 ^. 10⁵ l^-1 for ²²Na (n = 9, mean: 2 ^. 10⁴). Measurements of activity levels and activity ratios of short-lived cosmic-ray induced short-lived nuclides will open new method to understand atmospheric processes occurred at the altitude of rain cloud.     

Fluorometric determination of tin(IV) with 3-hydroxychromone

Summary 3-Hydroxychromone reacts with tin(IV) to produce 11 complex in a weakly acidic-neutral medium. The complex exhibits intense fluorescence. A sensitive method is described for the fluorometric determination of tin(IV) with 3-hydroxychromone. The calibration graph is linear in the range of 0.4–8.0g/25 ml of tin(IV) (pH 4.5–5.0, Excitation wavelength: 365 nm, Measured total fluorescence). Chloride which generally decreases the fluorescence intensity in the fluorometric determination of tin can be tolerated at 300-mg level.

---

Fluorometrische Bestimmung von Zinn(IV) mit 3-Hydroxychromon

Zusammenfassung 3-Hydroxychromon reagiert mit Zinn(IV) in schwach saurem bis neutralem Medium unter Bildung eines 11-Komplexes. Dieser fluoresziert intensiv. Ein empfindliches Verfahren zur Bestimmung von Sn(IV) auf dieser Grundlage wurde ausgearbeitet. Die Eichkurve verläuft in dem Gebiet zwischen 0,4 und 8,0g Sn/25 ml bei pH 4,5, einer Wellenlänge von 365 nm und bei Messung der Gesamtfluoreszenz geradlinig. Chloride, die die Fluoreszenzintensität bei Zinnbestimmungen im allgemeinen herabsetzen, können bis zu 300 mg toleriert werden.

     

A total synthesis of spiruchostatin A

We achieved the total synthesis of the histone deacetylase inhibitor spiruchostatin A, as the prelude to the preparation of a combinatorial library of its analogues. Two key reactions were an asymmetric acetate aldol reaction using a Zr-enolate and macrolactonization using the Shiina method.     

Mössbauer spectrometica analysis of thermal decomposition products of phosphate and oxalate coatings on steel

The deterioration of zinc, zinc—calcium and manganese phosphate coatings and oxalate coatings on steel on heating was investigated by conversion electron Mössbauer spectrometry. and the chemical change of the coatings was analysed on the basis of the thermal characteristics of Zn₃(PO₄)₂·4H₂O, Zn₂Fe(PO₄)₄·4H₂O, CaZn₂(PO₄)₂·2H₂O, Fe₃(PO₄)₂·8H₂O. (Mn, Fe)₅H₂(PO₄)₄·4H₂O and FeC₂O₄·2H₂O. The steel substrate beneath the coatings influenced the thermal decomposition and evaporation of coating materials under the various heating atmospheres. The heat resistance of these coatings and the state of the substrate were also investigated.     

UV-Vis, NMR, and time-resolved spectroscopy analysis of photoisomerization behavior of three- and six-azobenzene-bound tris(bipyridine)cobalt complexes

The photoisomerization properties of tris(bipyridine)cobalt complexes containing six or three azobenzene moieties, namely, [Co(II)(dmAB)3](BF4)2 [dmAB = 4,4'-bis[3'-(4'-tolylazo)phenyl]-2,2'-bipyridine], [Co(III)(dmAB)3](BF4)3, [Co(II)(mAB)3](BF4)2 [mAB = 4-[3' '-(4' '-tolylazo)phenyl]-2,2'-bipyridine], and [Co(III)(dmAB)3](BF4)3, derived from the effect of gathering azobenzenes in one molecule and the effect of the cobalt(II) or cobalt(III) ion were investigated using UV-vis absorption spectroscopy, femtosecond transient spectroscopy, and 1H NMR spectroscopy. In the photostationary state of these four complexes, nearly 50% of the trans-azobenzene moieties of the Co(II) complexes were converted to the cis isomer, and nearly 10% of the trans-azobenzene moieties of the Co(III) complexes isomerized to the cis isomer, implying that the cis isomer ratio in the photostationary state upon irradiation at 365 nm is controlled not by the number of azobenzene moieties in one molecule but rather by the oxidation state of the cobalt ions. The femtosecond transient absorption spectra of the ligands and the complexes suggested that the photoexcited states of the azobenzene moieties in the Co(III) complexes were strongly deactivated by electron transfer from the azobenzene moiety to the cobalt center to form an azobenzene radical cation and a Co(II) center. The cooperation among the photochemical structural changes of six azobenzene moieties in [Co(II)(dmAB)3](BF4)2 was investigated with 1H NMR spectroscopy. The time-course change in the 1H NMR signals of the methyl protons indicated that each azobenzene moiety in [Co(II)(dmAB)3](BF4)2 isomerized to a cis isomer with a random probability of 50% and without interactions among the azobenzene moieties.     

Preparation of Sr2CeO4:Eu3+,Dy3+ white luminescence phosphor particles and thin films by using an emulsion liquid membrane system

Sr(2)CeO(4) and Sr(2)CeO(4):Eu(3+),Dy(3+) phosphor particles and thin films were prepared by using an emulsion liquid membrane (ELM, water-in-oil-in-water (W/O/W) emulsion) system, containing VA-10 (2-methyl-2-ethylheptanoic acid) as extractant (cation carrier). A two-step extraction enabled efficient extraction for Sr(3+) and rare earth ions, and the resulting precursor metal oxalate particles produced in the internal water phase of the ELM system were about 60 nm in diameter. Calcination of the oxalate particles in air gave submicrometer-sized Sr(2)CeO(4) and Sr(2)CeO(4):Eu(3+),Dy(3+) particles, which showed blue and white luminescence, respectively, by UV excitation. Blue and white luminescence phosphor thin films were also prepared by soaking alumina substrates into the W/O emulsion containing precursor oxalate particles, followed by calcination in air.     

Amphotericin B covalent dimers forming sterol-dependent ion-permeable membrane channels

Polyenemacrolides such as amphotericin B (AmB) were thought to assemble together and form an ion channel across plasma membranes. Their antimicrobial activity has been accounted for by this assemblage, whose stability and activity are dependent on sterol constituents of lipid bilayer membranes. The structure of this channel-like assemblage formed in biomembranes has been a target of extensive investigations for a long time. For the first step to this goal, we prepared several AmB dimers with various linkers and tested for their channel-forming activity. Among these, AmB dimers that bore an aminoalkyl-dicarboxylate tether covalently linked between amino groups of AmB showed potent hemolytic activity. Furthermore, K+ influx actions monitored by measuring the pH of the liposome lumen by 31P NMR revealed that the dimers formed the molecular assemblage similar to that of AmB in phospholipid membrane. Judging from changes in 31P NMR spectra, the dimers appeared to induce "all-or-none"-type ion flux across the liposome membrane in the presence of ergosterol, which suggested that the ion channel formed by ergosterol/dimer is similar to that of AmB. With these data in hand, we are now trying to elucidate the structure of the ion-channel complex by making the labeled conjugates of AmB for NMR measurements.