Simultaneous ultramicrodetermination of heterogeneous halogens in organic compounds

The simultaneous ultramicrodetermination of heterogeneous halogens in organic compounds was carried out by the potentiometric titration with 0.002 M silver nitrate after the sample was decomposed by the flask combustion method. In examination of the titration, it was found that clear potential break at the end point was obtained by controlling the delivery speed of the titrant at 0.2 ml/min or slower and the temperature of the solution to be titrated at ca. 10 °C when chloride ion is present. The error due to coprecipitation during the titration and the effect of the mole ratio of heterogeneous halide ions in the sample solution was examined and discussed. The analysis of organic halogen compounds resulted in an error of within 0.4% and standard deviation of less than 0.25%.     

Novel neuronal nitric oxide synthase (nNOS) selective inhibitor, aplysinopsin-type indole alkaloid, from marine sponge Hyrtios erecta

Two novel aplysinopsin-type indole alkaloids, 1 and 2, and three known indole alkaloids were isolated from the marine sponge Hyrtios erecta. These compounds exhibited selective inhibitory activity against the neuronal isozyme of nitric oxide synthase (nNOS). Furthermore, new quinolone 7 was also isolated from the same marine sponge. The chemical structures of these new compounds were elucidated on the basis of spectroscopic analysis.     

Phase-separation and distribution of phenyl groups for PhTES-TEOS coatings prepared on polycarbonate substrate

Phenyltriethoxysilane (PhTES) and tetraethoxysilane (TEOS) coatings [xPhTES·(100 − x)TEOS (mol%)] (x = 0 − 80) were prepared on polycarbonate (PC) substrate, and adhesion, surface hardness and distribution of phenyl groups were studied. The coatings with more than 60 mol% of PhTES showed good adhesion (≈ 100%), and the pencil hardness of PC substrate (4B) improved to 2B or B after the coatings. Bulk gels with the same compositions were also prepared, and distribution of phenyl groups were estimated using fourier transform infrared (FT-IR) spectroscopy (KBr method for bulk gels and attenuated total reflection (ATR) method for coatings). A significant difference for the distribution of phenyl groups was clearly observed between bulk gels and coatings, suggesting PC substrate affects the distribution of phenyl groups in coatings. The adhesion and FTIR results revealed that there is an interaction caused by π-electrons between benzene rings on PC substrate and phenyl groups of PhTES-TEOS coatings. It was found that the adhesion was strongly correlated with the phenylsilsesquioxane networks formed around PC substrate side.     

Laser deposition of iron on graphite substrates

Pulsed laser deposition of iron atoms on graphite substrates was performed to produce iron carbide films. Mössbauer spectra of the sample revealed that iron carbide was produced on the substrate surface and that an α-Fe layer was produced above the iron carbide layer. When the substrate temperature was maintained at 300 K, the iron carbide layer had a hyperfine magnetic distribution because it contained high density of defects. Laser deposition of Fe at 570 K produced cementite Fe₃C with fewer defects due to enhancement of thermal reactions or annealing of the films. The orientation of hyperfine field of the Fe₃C film was parallel to the substrate surface.     

Quantum mechanical aspect of first order phase transition of crystals

Classical molecular dynamics and Metropolis Monte Carlo simulations were carried out to investigate the thermal stability and melting behaviors of free-standing Pd-Pt bimetallic nanowires (NWs) with pentagonal multi-shell-type (PMS-type) structure in the whole composition range. Equilibrium configurations at 100 K are predicted in the semi-grand canonical ensemble. Pd-Pt PMS-type NWs are stable with a multishell structure of alternating Pd and Pt compositions and Pd segregating systematically to the surface. On thermal heating, an interesting composition-dependent structural transformation from the PMS-type to face-centred-cubic (FCC) by overcoming a high energy barrier is observed for Pd-Pt bimetallic NWs before the melting. Consequently, the system energy is decreased. The FCC structure is found more stable than PMS-type over the whole range of composition. The melting of Pd-Pt bimetallic NWs is also studied. It is found to start at the edges, then propagate over the whole surface, and next to the interior. It occurs in a composition-dependent range of temperature.     

Peptidehelicenes in solution and gel: chiral discrimination through interactions between two types of helixes

Helical [5]thiaheterohelicene 5HM, which rapidly interconverts between P and M enantiomers in solution, was connected to helical l-phenylalanine oligomers with an ester linkage to give peptidehelicenes (5Fn, where n: number of bonded phenylalanines). The characteristics of 5F4 and 5F5 with two types of helixes in a molecule were investigated, particularly in comparison with those of 5F1–5F3 with an incomplete coil of a peptide moiety. l-Phenylalanine peptide chains induced a shift in the equilibrium between the P and M helixes of 5HM toward the P side for all the 5Fns examined. The enantiomeric excess (ee) of the P form increased with a decrease in temperature, together with an elongation of the peptide chains. 5F4 and 5F5 in hot solutions of some solvents formed a gel at room temperature, whereas 5F1–5F3 showed no such behavior. In this gel, the stable helical form of the 5HM moiety in 5F4 and 5F5 was observed to be the M form in contrast to that in their solutions.     

Mobility performance of a rigid wheel in low gravity environments

To investigate influences of gravity on mobility of wheeled rovers for future lunar/planetary exploration missions, model experiments of a soil-wheel system were performed on an aircraft during variable gravity maneuvers. The experimental set-up consists of a single rigid wheel and a soil bed with two kinds of dry sands: lunar soil simulant and Toyoura sand. The experimental results revealed that a lower gravity environment yields higher wheel slippage in variable gravity conditions. In addition to the partial gravity experiments, the same experiments with variable wheel load levels were also performed on ground (1 g conditions). The on-ground experiments produced opposite results to those obtained in the partial gravity experiments, where a lower wheel load yields lower slippage in a constant gravity environment. In low gravity environments, fluidity (flowability) of soil increases due to the confining stress reduction in the soil, while the effect of the wheel load on sinkage decreases. As a result, both of these effects are canceled out, and gravity seemingly has no effect on the wheel sinkage. In the meantime, in addition to the effect of wheel load reduction, the increase of the soil flowability lessens the shear resistance to the wheel rotation, as a result of which the wheel is unable to hold sufficient traction in low gravity environments. This suggests that the mobility of the wheel is governed concurrently by two mechanisms: the bearing characteristics to the wheel load, and the shearing characteristics to the wheel rotation. It appears that, in low gravity, the wheel mobility deteriorates due to the relative decrease in the driving force while the wheel sinkage remains constant. Thus, it can be concluded that the lunar and/or Mars’ gravity environments will be unfavorable in terms of the mobility performance of wheels as compared to the earth’s gravity condition.     

Reversible and Stepwise Single-Crystal-to-Single-Crystal Transformation of a Platinum(II) Complex with Vapochromic Luminescence

The vapochromic single-crystal-to-single-crystal (SCSC) transformation of a highly luminescent Pt^II complex bearing an N-heterocyclic carbene [Pt(CN)₂(tBu-impy)] (tBu-impyH⁺=1-tert-butyl-3-(2-pyridyl)-1H-imidazolium) is reported. The trihydrate form of the complex, which exhibits blue ³MMLCT emission owing to weak Pt⋅⋅⋅Pt interactions, changed its luminescence color from blue to yellowish-green upon the desorption of water molecules while keeping the high emission quantum yield of more than 0.45. Variable-temperature and continuous in-situ tracking of single-crystal X-ray diffraction measurements revealed that the SCSC transformation proceeds reversibly by the release and reabsorption of water molecules, thereby changing the stacked structure slightly. As a result, the dynamics of vapor-induced SCSC transformation were elucidated: that the anhydrous form returned to the original trihydrate form in a two-step process under a water vapor atmosphere. In addition, the Pt^II complex exhibited a similar SCSC response accompanied by a luminescence color change in the presence of methanol vapor, while being inactive toward ethanol vapor.     

Proton Conduction at High Temperature in High-Symmetry Hydrogen-Bonded Molecular Crystals of RuIII Complexes with Six Imidazole-Imidazolate Ligands

A new H-bonded crystal [Ru^III(Him)₃(Im)₃] with three imidazole (Him) and three imidazolate (Im⁻) groups was prepared to obtain a higher-temperature proton conductor than a Nafion membrane with water driving. The crystal is constructed by complementary N−H⋅⋅⋅N H-bonds between the Ru^III complexes and has a rare Icy-c* cubic network topology with a twofold interpenetration without crystal anisotropy. The crystals show a proton conductivity of 3.08×10⁻⁵ S cm⁻¹ at 450 K and a faster conductivity than those formed by only HIms. The high proton conductivity is attributed to not only molecular rotations and hopping motions of HIm frameworks that are activated at ∼113 K, but also isotropic whole-molecule rotation of [Ru^III(Him)₃(Im)₃] at temperatures greater than 420 K. The latter rotation was confirmed by solid-state ²H NMR spectroscopy; probable proton conduction routes were predicted and theoretically considered.