Structural confirmation of oligosaccharides newly isolated from sugar beet molasses

ABSTRACT: BACKGROUND: Sugar beet molasses is a viscous by-product of the processing of sugar beets into sugar. The molasses is known to contain sucrose and raffinose, a typical trisaccharide, with a well-established structure. Although sugar beet molasses contains various other oligosaccharides as well, the structures of those oligosaccharides have not been examined in detail. The purpose of this study was isolation and structural confirmation of these other oligosaccharides found in sugar beet molasses. RESULTS: Four oligosaccharides were newly isolated from sugar beet molasses using high-performance liquid chromatography (HPLC) and carbon-Celite column chromatography. Structural confirmation of the saccharides was provided by methylation analysis, matrix-assisted laser desorption/ionaization time of flight mass spectrometry (MALDI-TOF-MS), and nuclear magnetic resonance (NMR) measurements. CONCLUSION: The following oligosaccharides were identified in sugar beet molasses: beta-D-galactopyranosyl-(1- > 6)-beta-D-fructofuranosyl-(2 <-> 1)-alpha-D-glucopyranoside (named beta-planteose), alpha-D-galactopyranosyl-(1- > 1)-beta-D-fructofuranosyl-(2 <-> 1)-alpha-D-glucopyranoside (named1-planteose), alpha-D-glucopyranosyl-(1- > 6)-alpha-D-glucopyranosyl-(1 <-> 2)-beta-D-fructofuranoside (theanderose), and beta-D-glucopyranosyl-(1- > 3)-alpha-D-glucopyranosyl-(1 <-> 2)-beta-D-fructofuranoside (laminaribiofructose). 1-planteose and laminaribiofructose were isolated from natural sources for the first time.     

Thermally stable polymer composites with improved transparency by using colloidal mesoporous silica nanoparticles as inorganic fillers

The colloidal mesoporous silica nanoparticles with small particle sizes (namely, CMS) are used as inorganic fillers of polymers (i.e. epoxy and silicone). From simple calculation, almost all polymers are estimated to be confined in the mesopores. To clarify the superiority of CMS over nonporous silica particles and mesoporous silica particles with much larger size (TMPS-4) as inorganic fillers, a systematic study on mechanical strength and transparency of polymer-silica nanocomposites was conducted. Compared with nonporous silica particles, similar to TMPS-4, CMS shows a greater effect on lowering the CTE. In addition, obtained polymer-CMS nanocomposites show improved transparency than polymer-TMPS-4 nanocomposites.     

Preparation of alkyl-modified silicon nanosheets by hydrosilylation of layered polysilane (Si6H6)

Alkyl-modified crystalline silicon nanosheets 2 were synthesized and maintained the crystal structure of a Si(111) plane, in which the dangling silicon bond is stabilized by capping with the alkyl group. 2 was characterized using UV-vis, Fourier transform-infrared, and X-ray photoelectron spectroscopies; X-ray diffraction; and X-ray absorption near edge structure analysis. A model structure is proposed that has a periodicity through the nanosheet surface.     

Strong and selective binding of amiloride to an abasic site in RNA duplexes: thermodynamic characterization and microRNA detection

Firmly tied: The binding affinity of amiloride for an abasic (AP) site-containing RNA duplex is two orders of magnitude superior to the affinity of the corresponding AP site-containing DNA duplex. The observed high binding affinity for the RNA duplex arises from a favorable enthalpy gain. The binding-induced fluorescence response of amiloride is applicable to microRNA detection.     

Hydrothermal and solid-state transformation of ruthenium-supported Keggin-type heteropolytungstates [XW11O39{Ru(II)(benzene)(H2O)}]n- (X = P (n = 5), Si (n = 6), Ge (n = 6)) to ruthenium-substituted Keggin-type heteropolytungstates

A new pathway for the preparation of mono-ruthenium (Ru)(iii)-substituted Keggin-type heteropolytungstates with an aqua ligand, [PW(11)O(39)Ru(iii)(H(2)O)](4-) (1a), [SiW(11)O(39)Ru(iii)(H(2)O)](5-) (1b) and [GeW(11)O(39)Ru(iii)(H(2)O)](5-) (1c), using [Ru(ii)(benzene)Cl(2)](2) as a Ru source was described. Compounds 1a-1c were prepared by reacting [XW(11)O(39)](n-) (X = P, Si and Ge) with [Ru(ii)(benzene)Cl(2)](2) under hydrothermal condition and were isolated as caesium salts. Ru(benzene)-supported heteropolytungstates, [PW(11)O(39){Ru(ii)(benzene)(H(2)O)}](5-) (2a), [SiW(11)O(39){Ru(ii)(benzene)(H(2)O)}](6-) (2b) and [GeW(11)O(39){Ru(ii)(benzene)(H(2)O)}](6-) (2c), were first produced in the reaction media, and then transformed to 1a, 1b and 1c, respectively, under hydrothermal conditions. Calcination of Ru(benzene)-supported heteropolytungstates, 2a, 2b and 2c, in the solid state produced mixtures of 1a, 1b and 1c with CO (carbon monoxide)-coordinated complexes, [PW(11)O(39)Ru(ii)(CO)](5-) (4a), [SiW(11)O(39)Ru(ii)(CO)](6-) (4b) and [GeW(11)O(39)Ru(ii)(CO)](6-) (4c), respectively. From comparison of their catalytic activities in water oxidation reaction, it was indicated that ruthenium should be incorporated in the heteropolytungstate in order to promote catalytic activity.     

Fluorescence imaging of potassium ions in living cells using a fluorescent probe based on a thrombin binding aptamer-peptide conjugate

When a biotinylated FRET probe based on a peptide-thrombin binding aptamer conjugate was introduced together with streptavidin and biotinylated nuclear export signal peptide into HeLa cells, the resulting ternary complex enabled visualization of K(+) concentration changes in the cell.     

Self-oscillation of polymer chains induced by the Belousov-Zhabotinsky reaction under acid-free conditions

A novel self-oscillating polymer was prepared by utilizing the Belousov-Zhabotinsky (BZ) reaction. In this study, a sulfonic acid group was newly introduced as a pH-control site into the copolymer of N-isopropylacrylamide, and the ruthenium complex was introduced as a catalyst site. By introducing the pH-control site, we succeed in causing the soluble-insoluble self-oscillation of the polymer solution under acid-free conditions in which only two BZ substrates, malonic acid and sodium bromate, were present as added agents. The self-oscillating behavior was remarkably influenced by the temperature and polymer concentration, which reflects the intermolecular aggregative capacity of the polymer chains in the reduced state to change the lower critical solution temperature. This achievement of self-oscillation of polymer chains under acid-free conditions may lead to their practical use as novel biomimetic materials under biological conditions.     

Preparation of Sr2CeO4:Eu3+,Dy3+ white luminescence phosphor particles and thin films by using an emulsion liquid membrane system

Sr(2)CeO(4) and Sr(2)CeO(4):Eu(3+),Dy(3+) phosphor particles and thin films were prepared by using an emulsion liquid membrane (ELM, water-in-oil-in-water (W/O/W) emulsion) system, containing VA-10 (2-methyl-2-ethylheptanoic acid) as extractant (cation carrier). A two-step extraction enabled efficient extraction for Sr(3+) and rare earth ions, and the resulting precursor metal oxalate particles produced in the internal water phase of the ELM system were about 60 nm in diameter. Calcination of the oxalate particles in air gave submicrometer-sized Sr(2)CeO(4) and Sr(2)CeO(4):Eu(3+),Dy(3+) particles, which showed blue and white luminescence, respectively, by UV excitation. Blue and white luminescence phosphor thin films were also prepared by soaking alumina substrates into the W/O emulsion containing precursor oxalate particles, followed by calcination in air.     

General Information to Obtain Spherical Particles with Ordered Mesoporous Structures

Conditions for the synthesis of aluminum organophosphonate (AOP) and aluminophosphate (AlPO) spheres containing periodic mesopores were optimized and demonstrated to be general morphological controls for the surfactant‐assisted synthesis of mesoporous materials. High‐quality AOP and AlPO spheres with uniform mesopores were obtained at low and high temperatures, respectively. The aerosol‐assisted synthesis of materials with uniform mesopores was categorized by using the difference in relative density of soluble AOP and AlPO oligomers that interact with ethylene oxide (EO) units in EO_nPO_mEO_n triblock copolymer (PO=propylene oxide). Then, ordered mesoporous structures are constructed with the adequate amount of species in resultant frameworks, and the number of interactive points in soluble species determines the resultant density of the frameworks after self‐assembly. Consequently, temperature‐dependent synthesis, which allows controlled infiltration of soluble species to match the density of resultant frameworks, is required for the formation of ordered mesoporous structures under morphological control.