Block copolymers of thiophene-capped poly(methyl methacrylate) with pyrrole

Poly(methyl methacrylate) with a thiophene end group having narrow polydispersity was prepared by the Atom Transfer Radical Polymerization (ATRP) technique. Subsequently, electrically conducting block copolymers of thiophene-capped poly(methyl methacrylate) with pyrrole were synthesized by using p-toluene sulfonic acid and sodium dodecyl sulfate as the supporting electrolytes via constant potential electrolysis. Characterization of the block copolymers were performed by CV, FTIR, SEM, TGA, and DSC analyses. Electrical conductivities were evaluated by the four-probe technique. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4218–4225, 1999     

Effect of operating parameters on selective separation of heavy metals from binary mixtures via polymer enhanced ultrafiltration

Performance of continuous polymer enhanced ultrafiltration (PEUF) method was investigated for removal of mercury and cadmium from binary mixtures. This method includes the addition of polyethyleneimine (PEI) as a water soluble polymer to bind the metals, which was followed by ultrafiltration operation performed on both laboratory and pilot scale systems. The influence of various operating parameters such as temperature, metal/polymer ratio, presence of calcium ions and pH on retention of metals and permeate flux was investigated. To investigate the possibility of selective separation of mercury and cadmium, experiments were conducted for binary solutions at different pH and loading ratios. It was seen that the retention of mercury decreased and permeate flux increased when the temperature increased. The increased pH and decreased metal/polymer ratio, loading (L), resulted in higher retention of both metals. Shapes of retention vs. pH or L curves were very similar for both metals. Retentions stay almost constant at a value very close to unity until a critical L or pH value was reached, then, R decreases almost linearly with L or pH. However, retention of cadmium was affected more than that of mercury as the pH decreased and L increased. This leads to the selective separation of mercury and cadmium. At low pH values (about 5) and at high L values (about 0.3), mercury was removed by ultrafiltration operation while almost all cadmium passed through the membrane. At pH 5.5 and cadmium/polymer ratio about 0.35 and mercury/polymer ratio about 0.39, the highest separation factor was obtained as 49.     

Effects of the bond dilution on the phase diagrams of a spin-1 transverse Ising model with crystal field interaction on a honeycomb lattice

A bond diluted spin-1 Ising model with crystal and transverse field interactions is examined for honeycomb lattice by introducing an effective field approximation that takes into account the correlations between different spins that emerge when expanding the identities. The effects of the crystal field as well as the transverse field and dilution on the phase diagrams and order parameter m_z are discussed in detail. A number of interesting and unusual phenomena such as reentrant phenomena and three successive phase transitions originating from the crystal field as well as the transverse field and bond dilution have been found.     

Anticancer activities of manganese-based photoactivatable CO-releasing complexes (PhotoCORMs) with benzimidazole derivative ligands

Carbon monoxide is an important signaling molecule which is produced by heme oxygenase-1. CO shows antiproliferative activity against cancer cells; hence, activation of HO-1 is a significant inhibition strategy against tumor formation and survival of cancer cells. In this work, manganese-based CO-releasing molecules (CORMs) were designed and synthesized to inhibit breast cancer cell proliferation. Human invasive ductal breast cancer cells (MCF-7) were treated with the synthesized CORMs to investigate the effect of the complexes on breast cancer survival under UV light. In vitro experiments indicated that the complexes inhibited breast cancer cell proliferation, and further, the antiproliferative effects were increased under UV light. Thus, these novel CORMs may provide a drug template for the treatment of invasive ductal breast cancer.     

Diffraction of line source field by a resistive half-plane between isorefractive media

Optical and Quantum Electronics - Numerical modelling of a Pr3+-doped chalcogenide glass fibre laser is presented in this paper. The spectroscopic parameters are extracted from in-house prepared...     

Thioxanthone–carbazole as a visible light photoinitiator for free radical polymerization

A thioxanthone (TX) derivative with the additional carbazole chromophore, namely thioxanthone‐carbazole (TX‐C) was synthesized and characterized. The photophysical properties and its efficiency to polymerize methyl methacrylate both in the presence and absence of N,N‐dimethylaniline (DMA) as coinitiator was investigated and compared with that of the commercially available TX. TX‐C was found to display better photophysical properties and in both cases initiate polymerization more efficiently. Detailed real‐time Fourier transform infrared studies revealed that high polymerization rates can be obtained when TX‐C in conjunction with DMA was used. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Total Synthesis of the Biologically Active,Naturally Occurring 3,4‐Dibromo‐5‐[2‐bromo‐3,4‐dihydroxy‐6‐(methoxymethyl)benzyl]benzene‐1,2‐diol and Regioselective O‐Demethylation of Aryl Methyl Ethers

3,4‐Dibromo‐5‐[2‐bromo‐3,4‐dihydroxy‐6‐(methoxymethyl)benzyl]benzene‐1,2‐diol ( 2 ), a natural product, has been synthesized for the first time starting from (3‐bromo‐4,5‐dimethoxyphenyl)methanol ( 5 ) in five steps and with an overall yield of 34%. The reaction of some methoxymethyl‐substituted aryl methyl ethers with BBr₃, followed by the addition of MeOH, afforded the corresponding methoxymethyl‐substituted arylphenols in high yields.     

Phosphorus ligands for iron(III)‐mediated ATRP of styrene via generation of activators by monomer addition

Styrene polymerization via generation of activators by monomer addition (GAMA) for atom transfer radical polymerization (ATRP) has been examined extensively with bulk FeX₃ and FeX₂ at 110 °C in conjunction with various phosphorus‐bearing ligands. It was found that GAMA possesses advantages over normal ATRP. Most importantly, narrower polydispersity index (PDI) values were observed from the styrene polymerizations with Fe(III) over those with Fe(II). Every instance of 2‐(diphenylphosphino)‐N,N′‐dimethyl‐[1,1′‐biphenyl]‐2‐amine and 2‐(diphenylphosphino) pyridine with the Fe(III) system were controlled excellently without addition of any radical initiator or reducing agent additives. Initiator type was found to exert a significant factor to influence on the controllability of polymerization. The initiation of 1‐phenylethyl chloride and methyl‐2‐chloropropionate gave rise to formation of polymers with narrow PDI (1.05–1.20), whereas those from 1‐phenylethyl bromide increased to 1.35. The GAMA of bulk styrene exhibited the best performance in terms of both rate and controllability compared with toluene and anisole. Both formation of block copolymer from the macroinitiator and efficient perturbation of polymerization with 2,2,6,6‐tetramethylpiperidine 1‐oxyl provided firm evidence to support the living and radical characteristics for the GAMA of styrene. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 144–151, 2010     

Poly(cyclohexene oxide)/clay nanocomposites by photoinitiated cationic polymerization via activated monomer mechanism

Poly(cyclohexene oxide) (PCHO)/clay nanocomposites were prepared by in situ photoinitiated activated monomer cationic polymerization. The polymerization of cyclohexene oxide through the interlayer galleries of the clay can provide distribution of the clay layers in the polymer matrix homogenously and results in the formation of PCHO/clay nanocomposites. The exfoliated structures were characterized by X‐ray diffraction spectroscopy, thermogravimetric analysis, transmission electron microscopy, and atomic force microscopy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5328–5335, 2009     

Steps towards a practical synthesis of macrocyclic bisbenzylisoquinolines

There are more than 400‐reported bisbenzylisoquinoline alkaloids, many with interesting biological activity, but the reported syntheses are long and low yielding. As a result, there have been no systematic attempts at exploitation of the potential therapeutic applications. The concept of a sulfur ‘stitch’, restricting the conformational freedom of intermediates in the synthesis, will potentially allow analogues of the natural products to be prepared using relatively efficient routes. The synthesis of intermediate sulfur heterocycles is reported, based on 2,8‐dimethylphenoxathiin, leading via 2,8‐bis(bromomethyl)phenoxathiin‐10,10‐dioxide to a synthesis of 3,4,8,9‐tetrahydro‐13‐oxa‐6‐thia‐2,10‐diazapentacene, a key potential intermediate on the route to a variety of macrocyclic bisbenzylisoquinolines.