A low-cost,fast, disposable and sensitive biosensor study: flow injection analysis of glucose at poly-methylene blue-modified pencil graphite electrode

In this work, firstly methylene blue (MB) was electropolymerized onto pencil graphite electrode (PGE) surface for the electrocatalytic oxidation of NADH. Cyclic voltammograms show that oxidation potential of NADH at Poly-MB/PGE shifted to negative direction about 300 mV compared with bare PGE. These results indicate that Poly-MB/PGE exhibits a good electrocatalytic activity toward NADH oxidation. Then, a glucose biosensor study was performed based on the determination of enzymatically generated NADH by glucose dehydrogenase (GDH) which immobilized onto Poly-MB/PGE using glutaraldehyde cross-linking procedure. The biosensing of glucose in flow injection analysis (FIA) system was performed at GDH/Poly-MB/PGE for the first time. The electrocatalytic oxidation currents of enzymatically produced NADH obtained from FI amperometric current–time curves recorded at + 200 mV and in phosphate buffer solution at pH 7.0 containing 1.0 M KCl were linearly related to the concentration of glucose. Linear calibration plots are obtained in the concentration range from 0.01 to 1.0 mM. The limit of detection (LOD) was found to be 4.0 µM. A fast, sensitive, low-cost and disposable glucose biosensor was constructed in FIA system using GDH/Poly-MB/PGE; therefore, it might provide a new perspective for the fabrication of biosensor of other compounds such as glutamate, lactate and alcohol.     

Isolation and characterization of four novel β-Sitosteryl esters from Salvadora persica Linn.

Salvadora persica is virtuous to have a variety of phytoconstituents responsible for many biological activities some of them identified particularly while some are still to be acknowledged. A number of steroidal, glycosidic, terpenoids, saponins and functional esters are reported till date. The present study deals with extraction, isolation, and characterisation of four novel steroidal esters by systematic cold extraction of S. persica. The extracted phytoconstituents were characterised by sophisticated spectral UV, IR, NMR and MS, techniques. The reported four new β-Sitosteryl esters SP-2, 3, 5 and 6 were extracted and reported for the first time.     

An alternative method for the evaluation of docking performance: RSR vs RMSD

A new assessment criterion for docking poses is proposed in which experimental electron density is taken into account when evaluating the ability of docking programs to reproduce experimentally observed binding modes. Three docking programs (Gold, Glide, and Fred) were used to generate poses for a set of 88 protein-ligand complexes for which the crystal structure is known. The new criterion is based on the real space R-factor (RSR), which measures how well a group of atoms-in our case the ligand-fits the experimental electron density by comparing that density to the expected density, calculated from the model (i.e., the predicted ligand pose). The RSR-based measure is compared to the traditional criterion, the root-mean-square distance (RMSD) between the docking pose and the binding configuration in the crystallographic model. The results highlight several shortcomings of the RMSD criterion that do not affect the RSR-based measure. Examples illustrate that the RSR-derived approach allows a more meaningful a posteriori assessment of docking methods and results. Practical implications for docking evaluations and for methodological development work in this field are discussed.     

Pyrolysis of poly(phenylene vinylene)s with polycaprolactone side chains

The thermal degradation characteristics of a new macromonomer poly(-caprolactone) with central 4,4′-dicarbaldehyde terphenyl moieties and poly(phenylene vinylene)s with well defined (-caprolactone), (PPV/PCL) as lateral substituents were investigated via direct pyrolysis mass spectrometry. The unexpectedly high thermal stability of the macromonomer was attributed to intermolecular acetylation of benzaldehyde yielding a hemiacetal and causing a crosslinked structure during the pyrolysis. Increased thermal stability of the PCL chains was detected for all samples. The increase in stability of PCL chains was much more pronounced than was detected for poly(p-phenylene)-graft-poly(-caprolactone) copolymer (PPP/PCL); the upward temperature shift was about 100 °C for PPV/PCL and only 20 °C for PPP/CL. This pronounced effect may be due to higher thermal stability of PPV compared to PPP and the decrease in steric hindrance for PPV with PCL side chains.     

Voltammetric Determination of Favipiravir Used as an Antiviral Drug for the Treatment of Covid-19 at Pencil Graphite Electrode

This work describes the sensitive voltammetric determination of favipiravir (FAV) based on its reduction for the first time with a low-cost and disposable pencil graphite electrode (PGE). In addition, the determination of FAV was also performed based on its oxidation. Differential pulse (DP) voltammograms recorded in 0.5 M H₂SO₄ for the reduction of FAV show that peak currents increase linearly in the range of 1.0 to 600.0 μM with a limit of detection of 0.35 μM. The acceptable recovery values (98.9–106.0 %) obtained from a pharmaceutical tablet, real human urine, and artificial blood serum samples spiked with FAV confirm the high accuracy of the proposed method.     

Formation and shear-induced processing of quantum dot colloidal assemblies in a multiphase microfluidic chip

The controlled self-assembly of polymer-stabilized quantum dots (QDs) into mesoscale aqueous spherical assemblies termed quantum dot compound micelles (QDCMs) using a two-phase gas-segmented microfluidic reactor is described. Self-assembly is initiated by the fast mixing of water (approximately 1 s) with a blend solution of polystyrene-coated QDs and amphiphilic polystyrene-block-poly(acrylic acid) stabilizing chains via chaotic advection within liquid plugs moving through a sinusoidal channel. Subsequent recirculating flow within a post-formation channel subjects the dynamic QDCMs to shear-induced processing, controlled via the flow rate and channel length, before a final quench into pure water. During processing, larger QDCMs within the initial population undergo breakup into smaller particles, resulting in smaller mean particle sizes, smaller relative standard deviations, and more skewed distribution shapes, as the overall shear exposure is increased. For these cases, shear-induced size reduction is sufficient to dominate surface tension-driven growth.     

The Fermi-Walker Derivative on the Spherical Indicatrix of a Space Curve

In this paper Fermi-Walker derivative and Fermi-Walker parallelism and non-rotating frame concepts are given along the spherical indicatrix of a curve in E ³. First, we consider a curve in Euclid space and investigate the Fermi-Walker derivative along the tangent. The concepts which Fermi-Walker derivative are analyzed along its tangent. Then, the Fermi-Walker derivative and its theorems are analyzed along the principal normal indicatrix and the binormal indicatrix of any curve in E ³.     

Pyrolysis of polyphenylenes with PCL or/and PSt side chains

Thermal degradation characteristic of polyphenylenes is an important issue for developing a rational technology of polymer processing and applications. In this study, we discussed thermal degradation of polyphenylenes (PP) with poly(-caprolactone) (PCL) and/or PCL/polystyrene copolymers (PSt) prepared by combined controlled polymerization and cross-coupling processes via direct pyrolysis mass spectrometry. When PP-graft-PCL/PSt copolymers were considered, thermally less stabile PCL side chains decomposed in the first step. In the second stage of pyrolysis, the decomposition of the polystyrene chains has taken place. A slight increase in thermal stability of PCL chains for PP-graft-PCL/PSt copolymers was noted compared to copolymer PP-graft-PCL due to the interaction between PSt and PCL chains. This interaction was stronger when PSt chains were linked to the 2-position of the 1,4-phenylene ring.     

Development of agriculture biotechnology in Pakistan

Agriculture plays an important role in the national economy of Pakistan, where most of the rapidly increasing population resides in rural areas and depends on agriculture for subsistence. Biotechnology has considerable potential for promoting the efficiency of crop improvement, food production, and poverty reduction. Use of modern biotechnology started in Pakistan since 1985. Currently, there are 29 biotech centers/institutes in the country. However, few centers have appropriate physical facilities and trained manpower to develop genetically modified (GM) crops. Most of the activities have been on rice and cotton, which are among the top 5 crops of Pakistan. Biotic (virus/bacterial/insect) and abiotic (salt) resistant and quality (male sterility) genes have already been incorporated in some crop plants. Despite acquiring capacity to produce transgenic plants, no GM crops, either produced locally or imported, have been released in the country. Pakistan is signatory to the World Trade Organization, Convention on Biological Diversity, and Cartagena protocols. Several legislations under the Agreement on Trade-Related Aspects of Intellectual Property Rights have been promulgated in the country. National Biosafety Guidelines have been promulgated in April 2005. The Plant Breeders Rights Act, Amendment in Seed Act-1976, and Geographical Indication for Goods are still passing through discussion, evaluation, and analysis phases. Meanwhile, an illegal GM crop (cotton) has already sneaked into farmer's field. Concerted and coordinated efforts are needed among various ministries for implementation of regulation and capacity building for import/export and local handling of GM crops. Pakistan could easily benefit from the experience of Asian countries, especially China and India, where conditions are similar and the agriculture sector is almost like that of Pakistan. Thus, the exchange of information and experiences is important among these nations.