Identification of radical structures on 1‐pentamethylbenzyl‐3‐ethylimidazoliumsilver(I)bromide and 1,3‐bis(pentamethylbenzyl)‐4,5‐dimethylbenzimidazoliumsilver(I)bromide exposed to gamma rays: an EPR study

1‐Pentamethylbenzyl‐3‐ethylimidazoliumsilver(I)bromide and 1,3‐bis(pentamethylbenzyl)‐4,5dimethylbenzimidazoliumsilver(I)bromide and their Ag⁺ complexes were synthesized and their polycrystal forms were produced by recrystallization in dichloromethane/Et₂O solvent system. Structural determinations were carried out by ¹H NMR and ¹³C NMR with a Varian 400 NMR system using tetramethylsilane as internal standard and CDCl₃ as solvent. The disappearance of acidic N‐heterocyclic carbene proton showed the formation of Ag(I) complexes. Also, elemental analyses were carried out. Electron paramagnetic resonance (EPR) measurements were performed to determine the formed radical structure on the samples irradiated at the room temperature for 72 h by using ⁶⁰Co‐source with dose rate of 0.680 kGy. The EPR measurements were carried out in the temperature range of 200 K–450 K. Identical radicals were determined on the irradiated compounds. It was observed that the shapes of the spectra of the samples were independent of the temperature but, the resonance line intensities changed linearly with the temperature. Also, it was detected that the free radical on the 1‐pentamethylbenzyl‐3‐ethylimidazoliumsilver(I)bromide is not stable compared to that on the 1,3‐bis(pentamethylbenzyl)‐4,5dimethylbenzimidazoliumsilver(I)bromide. Copyright © 2016 John Wiley & Sons, Ltd.     

Diffraction of line source field by a resistive half-plane between isorefractive media

Optical and Quantum Electronics - Numerical modelling of a Pr3+-doped chalcogenide glass fibre laser is presented in this paper. The spectroscopic parameters are extracted from in-house prepared...     

Dielectric Properties of Polymer Composites Filled with Different Metals

Electrically conductive composite systems based on polyvinyl chloride (PVC) and polymethyl methacrylate (PMMA) filled with metal powders of Al and Cu have been studied. The composite preparation conditions allow the formation of a random distribution of metallic particles in the polymer matrix. Dependence of the dielectric and conductivity properties of the PVC and PMMA/fillers was studied over a broad range of frequency and volume fraction of metal fillers. The experimental results could be explained by means of the conductivity of fillers and the interface polarization between polymers and fillers. Percolation was also seen in this study when the volume fraction of conducting fillers was close to critical value, in which the composites undergo an insulator‐conductor transition. The relation among the dielectric property and the fillers with different conductivity was proposed.     

Preparation,Characterization and Electromagnetic Shielding Effectiveness of Conductive Polythiophene/Poly(ethylene terephthalate) Composite Fibers

Conductive polythiophene (PTh)/poly(ethylene terephthalate) (PET) composite fibers were prepared by polymerization of thiophene in the presence of PET fibers in acetonitrile medium using FeCl₃. The effects of polymerization conditions such as oxidant/monomer mol ratio and polymerization temperature and time on PTh content and surface electrical resistivity of PTh/PET composite fiber were investigated in detail. It was observed that the usage of preswelled PET fibers in dichloromethane increased the PTh content and decreased surface resistivity of composite fiber. Composite fiber having the highest PTh content (5.7%) and the lowest surface resistivity (80 kΩ) was obtained at 20°C with 1.25 M FeCl₃ and 0.42 M thiophene concentrations. The washing effects of laundering detergent and dry cleaning liquid on surface resistivity of composite fibers were investigated. The electromagnetic shielding effectiveness (EMSE) and relative shielding efficiency by absorption and reflection of composite fibers were measured in the radio and microwave frequency range. The results show that the EMSE values decreased with increasing frequency from radio waves to microwaves with an attenuation of 21 dB to 4 dB.     

Magnetic properties of electrochemically prepared crystalline films of Prussian blue-based molecular magnets K j CrII k [CrIII(CN)6] l · mH2O

Crystalline films (thickness ～1 μm) of Prussian blue-based molecular magnets, synthesized using electrochemical method at two different reduction potentials ?0.5 and ?0.9 V, result into K_0.1Cr^II _1.45[Cr^III(CN)₆]?·?mH₂O (film 1) and K_0.8Cr^II _1.1[Cr^III(CN)₆]?·?mH₂O (film 2), respectively. The structural and magnetic properties of such films are investigated using atomic force microscopy (AFM), X-ray diffraction (XRD), infrared (IR) spectroscopy, and dc magnetization measurements. The film morphology, examined using AFM, shows uniformly distributed triangular crystallites over the substrate surface. The presence of Cr^III–C≡N–Cr^II sequence, in the range of 1,900 to 2,300 cm^?1 in IR spectra, confirms formation of Prussian blue analogues. The XRD results reveal information about the crystalline nature of the films and the relative intensities of the Bragg peaks change with the K⁺ ions. The exchange interaction between Cr ions through C≡N ligand confirms that the electron transfer from C≡N molecule to Cr ions is ferrimagnetic in nature. The high Curie temperatures (T _C) are found to be ～195 and ～215 K for film 1 and film 2, respectively. The higher value of T _C is attributed to the inclusion of more K⁺ ions for film 2, resulting decreases in the Cr^III(C≡N)₆ vacancies and increases in the number of nearest neighbors of Cr^II ions. The branching in the zero field-cooled and field-cooled magnetization data below Curie temperature is explained in terms of kinetic behavior of magnetic domains with different cooling conditions and the presence of water molecule vacancies in the lattice.     

Sonochemical synthesis and electrochemical characterization of α-nickel hydroxide: precursor effects

Sonochemical degradation of urea was employed to synthesize alpha-nickel hydroxide from different nickel salts. Utilization of ultrasound yielded products with properties significantly different than the products obtained by thermal degradation of urea. The effect of intercalating chloride, nitrate, acetate, and sulfate anions on morphology and electrochemical performance was studied. The sulfate-intercalated sample had the smallest interlayer spacing when obtained by the sonochemical method, contradicting all the previous thermal synthesis results. The specific capacitance trend also differed from the literature values, and the value for the sulfate-intercalated sample was larger than that of acetate- and nitrate-intercalated samples. Ultrasonic synthesis increased the specific capacitance of the sulfate-intercalated sample significantly. This sample was also the most reversible and had the highest charge efficiency.     

Voltammetric methods of reboxetine analysis and the mechanism of its electrode reactions

Reboxetine (RBX) electrochemical redox behavior at hanging mercury drop (HMDE) and glassy carbon electrodes (GCE) was studied in various pH Britton-Robinson universal buffers using cyclic voltammetry and square-wave voltammetry. RBX was reduced at the HMDE and oxidized at the GCE with reversible adsorption controlled and irreversible diffusion controlled processes respectively. The anodic peak is due to the amine and the cathodic peak may correspond to oxygen protonation. An oxidation reaction mechanism is proposed. The linear relation between peak currents and RBX concentration allowed simple, sensitive, precise and inexpensive voltammetric procedures to be developed. The limit of detection was 0.04 µM RBX. The procedures were successfully applied to human urine and RBX tablet assay. Therapeutic RBX concentrations in human serum were not detected due to strong drug-protein binding. Using bovine serum albumin, the methods were used to investigate the effect of serum protein binding on RBX determination.