Study on a broad-area laser diode with external cavity feedback

The external cavity feedback of a broad-area laser diode is investigated. In Fourier optic methods, the inserted prism in an external cavity can be interpreted as a spatial filter in the Fourier plane of the laser diode. The transverse mode can be selected by changing the position of the filter. As the result of a self-consistency theoretical analysis, the output beam of the external cavity has a single-lobed far-field profile. It agrees well with the experiment result. The beam times-diffraction-limit-factor M² is measured to be 1.16.     

基于量子相干控制吸收的准Λ型四能级原子局域化研究

提出了一种基于量子相干控制吸收的对准Λ型四能级原子进行二维局域化方案. 利用密度矩阵微扰理论, 得到了确定原子空间位置信息的筛选函数解析表达式. 在缀饰态表象中, 分析了在相干控制场作用下原子初始状态对原子局域的影响. 数值模拟了控制场参量对原子局域化结果的影响. 研究发现原子局域化结果与初始时刻在控制场作用下原子在下能态的布局、下能级间产生的极化密切相关; 不管探测场与耦合场是否满足电磁感应透明配置条件, 通过改变控制场中的行波场的振幅和探测场的失谐量, 均可实现高精度原子局域化, 在亚波长范围内测量到原子的概率达到100%.     

Excellent passivation of thin silicon wafers by HF‐free hydrogen plasma etching using an industrial ICPECVD tool

In this work, hydrogen plasma etching of surface oxides was successfully accomplished on thin (～100 µm) planar n‐type Czochralski silicon wafers prior to intrinsic hydrogenated amorphous silicon [a‐Si:H(i)] deposition for heterojunction solar cells, using an industrial inductively coupled plasma‐enhanced chemical vapour deposition (ICPECVD) platform. The plasma etching process is intended as a dry alternative to the conventional wet‐chemical hydrofluoric acid (HF) dip for solar cell processing. After symmetrical deposition of an a‐Si:H(i) passivation layer, high effective carrier lifetimes of up to 3.7 ms are obtained, which are equivalent to effective surface recombination velocities of 1.3 cm s^–1 and an implied open‐circuit voltage (V_oc) of 741 mV. The passivation quality is excellent and comparable to other high quality a‐Si:H(i) passivation. High‐resolution transmission electron microscopy shows evidence of plasma‐silicon interactions and a sub‐nanometre interfacial layer. Using electron energy‐loss spectroscopy, this layer is further investigated and confirmed to be hydrogenated suboxide layers. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

BEPCⅡ Control System

The BEPCⅡ project is for upgrading the Beijing Electron Positron Collider to reach a higher luminosity.BEPCⅡ is designed as micro-β plus multi-bunches with double rings and has adopted cryogenic superconducting technology. The BEPCⅡ control system is a distributed system based on EPICS. In the past few years, we went through the design stage, R&D stage, development stage and the system will be installated. The BEPCⅡ machine commissioning with beam will start in October 2006. This paper describes the BEPCⅡ~control system and the progress of its development.     

永磁同步风力发电机随机分岔现象的全局分析

永磁同步风力发电机在运行过程中不可避免地会受到风能的随机干扰,本文建立了在输入机械转矩存在随机干扰情况下永磁同步风力发电机的数学模型,采用胞映射方法分析了随机干扰强度变化时系统全局结构的演化行为,并通过数值模拟对理论分析进行验证.研究结果表明,随着随机干扰强度的增大,系统中会出现随机内部激变和随机边界激变,即由于随机吸引子与其吸引域内的随机鞍发生碰撞而产生的随机分岔现象和由于随机吸引子与其吸引域边界发生碰撞而产生的随机分岔现象.研究结果揭示了随机干扰对永磁同步风力发电机运行性能影响的机理,为永磁同步风力发电系统的运行和设计提供了理论依据.     

Influence of magnetic powders on the tribological performance of a novel magnetic brake material

By adding magnetic powders into matrix material, it has been proved to be a creative approach to improve tribological properties of brake materials. In this paper, a novel magnetic brake material with Nd–Fe–B and nano-Fe₃O₄ was developed, and the influential mechanism of these two magnetic powders and their content on the friction and wear performance was deeply discussed. Firstly, some experiments were carried out to investigate the tribological performance and influential mechanisms of four groups of brake pad samples with different magnetic powders. Furthermore, based on these results, further experiments for investigating the influence that Nd–Fe–B contents have on the tribological properties were conducted. According to the theoretical analysis about experiments, it was concluded that nano-Fe₃O₄ is beneficial to promote the formation of friction film and has certain lubricant effects. However, Nd–Fe–B has double effects on the formation of friction film. It will have positive effects when its content is less than a certain value. Otherwise, it will destroy the structure of friction film. Conclusively, it is believed that this study will be significantly valuable and meaningful for developing new brake materials and improving safety reliability of mechanical brakes.     

Localized states emission in type‐I GaAsSb/AlGaAs multiple quantum wells grown by molecular beam epitaxy

As an important candidate for novel infrared semiconductor lasers, the optical properties of GaAsSb‐based multiple quantum wells (MQWs) are crucial. The temperature‐ and excitation power‐dependent photoluminescence (PL) spectra of the GaAs_0.92Sb_0.08/Al_0.2Ga_0.8As MQWs, which were grown by molecular beam epitaxy, were investigated and are detailed in this work. Two competitive peaks were observed from 40 K to 90 K. The peak located at the low‐energy shoulder was confirmed to be localized states emission (LE) and the high‐energy side peak was confirmed to be free‐carrier emission by its temperature‐dependent emission peak position. It is observed that the LE peak exhibited a blueshift with the increase of laser excitation power, which can be ascribed to the band filling effect of localized states. Our studies have great significance for application of GaAsSb‐based MQWs in infrared semiconductor lasers.

     

High-power CW diode-side-pumped 1341 nm Nd:YAP laser

A high-power CW diode-side-pumped Nd:YAP laser with linearly polarization at 1341 nm has been described. The laser characteristics including thermal lens and stability of flat–flat resonator were studied. By comparing the output powers at different resonator lengths and different output couplers, the c-axis polarized laser working at 1341 nm has been obtained with a maximum output power of 121 W at the pumping power of 555 W. The optical–optical efficiency is 21.8% and the optical slope efficiency is 40%. The a-axis polarized laser at 1339 nm has also been successfully obtained when the c-axis polarized laser had become instable with the increase of pumping power.     

被动补偿脉冲发电机涡流损耗的解析计算

在假设转子导电筒中涡流面电流与定子无槽电枢绕组面电流相同、相位相反的条件下,条件麦克斯韦方程组,通过分析被动补偿脉冲发电机导电筒中涡流分布,导出了被动补偿脉冲发电机导电筒涡流损耗的解析表达式,并计算了涡流损耗对25MW样机运行的影响。