Reference electrodes for low-temperature gas sensors

The behavior of sodium oxide bronzes in contact with sodium-conducting solid electrolytes in atmospheres of oxygen, carbon dioxide, hydrogen sulfide, and humid air was investigated. The exchange currents at the Na_xCoO_y/NASICON interface was determined. It is shown that among the sodium-cobalt oxide bronzes the β-phase of the composition Na_0.6CoO₂ is the most reversible one (exchange current 236 μA/cm²). Paper presented at the 1st Euroconference on Solid State Ionics, Zakynthos, Greece, 11–18 Sept. 1994     

Luminescent lanthanide complexes with liquid crystalline properties

Lewis-base adducts of tris( β-diketonato)lanthanide(III) complexes were prepared, where the β-diketone is para -alkoxy-substituted 1,3-diphenyl-1,3-propanedione. These compounds are the first examples of liquid crystalline lanthanide complexes in which the mesomorphism is introduced via a β-diketonate ligand. Depending on the type of the Lewis base, the metallomesogens exhibit a monotropic smectic A or a monotropic highly ordered smectic phase. Intense photoluminescence was observed for the europium(III) complexes at room temperature.     

Magnetic properties of rare-earth β-enaminoketone metallomesogens

Reaction of β-enaminoketones with lanthanide salts leads to mesomorphic complexes displaying an S_A mesophase. The mesophase was characterized using X-ray scattering, EPR and magnetic susceptibility. A very high magnetic anisotropy was deduced for a complex containing dysprosium.     

Two-dimensional liquid chromatography with mixed mode stationary phases

Mixed mode stationary phases with ion-pairing reagent (acidic or basic) as integral part of hydrophobic chain offers unique selectivity, and hence, are ideal for multidimensional separations. The retention of hydrophobic components is a function of organic content, whereas that of charged species is a function of organic content, ionogenic modifier and its level in the mobile phase. Hence, by controlling the parameters influencing component retention (stationary phase and mobile phase), the selectivity of chemical components in the two-dimensional plane can be manipulated to improve the separation. A two-dimensional liquid chromatograph has been developed by coupling similar and dissimilar mixed mode stationary phases in the two dimensions. This technique has immense potential in resolving co-eluting components as the retention mechanism in the two-dimensions are complementary. However, with only part of the primary column eluent sampled into the secondary column, the technique is limited to qualitative analysis.     

A Recursive Construction for New Symmetric Designs

We introduce a recursive construction of regular Handamard matrices with row sum 2h for h=±3ⁿ. Whenever q=(2h – 1)² is a prime power, we construct, for every positive integer m, a symmetric designs with parameters (4h²(q^m+1 – 1)/(q – 1), (2h² – h)q^m, (h² – h)q^m).     

Letter: Influence of experimental conditions on electrospray ionization mass spectrometry of ferrocenylalkylazoles

Influence of experimental conditions on electrospray/ionization (ESI) mass spectra of ferrocene derivatives FcCHRAz (Fc = eta5-C5H5-Fe-eta5- C5H4; R = H, Az = benzimidazole; R = Ph, Az = 2-methylimidazole) has been investigated. The spectra of all the compounds revealed [M]+*, product of its fragmentation [FcCHR]+ as well as products of ion/molecular interactions (protonated molecule [MH]+, binuclear ion [(FcCHR)2 Az]+, dimeric ion [M2]+* and its protonated form [M2H]+). Relative abundances of these ions appreciably (more than one order) depend on experimental conditions: analyte concentration, temperature of heated capillary, spray voltage, flow rate of mobile phase and polarity of solvents. Established correlations allow the selection of optimum experimental conditions for registration of ESI mass spectra, as required by the application. If an unknown compound is to be identified, it is necessary to operate by using polar solvents, small concentration, low temperature of heated capillary, high spray voltage and flow rates. There are high-intensity binuclear and protonated dimeric ions in mass spectra under other conditions. It can give rise to wrong interpretation of the structure of investigated compound. At the same time, for study of ion-molecular processes by ESI-MS it is necessary to use concentrated samples in non-polar solvents. In this case the dependence of reaction products yields on temperature and flow rate of mobile phase must be investigated.     

Degenerations of binary Lie and nilpotent Malcev algebras

We describe degenerations of four-dimensional binary Lie algebras, and five- and six-dimensional nilpotent Malcev algebras over ?. In particular, we describe all irreducible components of these varieties.     

Raman spectroscopic studies of terthiophenes for molecular electronics

The effect of thiol and selenol functionalization on the vibrational spectra and photochemical stability of terthiophene based molecular wires was investigated using surface-enhanced Raman scattering (SERS). The molecules were found to exhibit markedly different properties at the silver surface of the SERS substrate, despite having almost identical Raman spectra in solution and in the solid state. In contrast to terthiophene (3T), the bisthiolterthiophene (T3) and biselenol-terthiophene (Se3) molecules were stable against photoinduced structural changes when adsorbed to the metal surface at low concentrations. This indicates that the strong bonds to the silver surface, via S or Se terminal atoms, leads to a rapid decay of photoexcited states. Comparison with ab initio calculations shows that both T3 and Se3 bind with only one of the functional groups to the Ag surface.     

Direct probing of sorbent-solvent interactions for amylose tris(3,5-dimethylphenylcarbamate) using infrared spectroscopy, X-ray diffraction, solid-state NMR, and DFT modeling

The sorbent-solvent interactions for amylose tris(3, 5-dimethylphenylcarbamate) (ADMPC) with five commonly used solvents, hexane, methanol, ethanol, 2-propanol (IPA), and acetonitrile (ACN), are studied using attenuated total reflection infrared spectroscopy (ATR-IR) of thin sorbent films, X-ray diffraction (XRD) of thin films, (13)C cross polarization/magic angle spinning (CP/MAS) and MAS solid state NMR of polymer-coated silica beads (commercially termed "Chiralpak AD"), and DFT modeling. The ADMPC-polymer-coated silica beads are used commercially for analytical and preparative scale separations of chiral enantiomers. The polymer forms helical rods with intra- and inter-rod hydrogen bonds (H-bonds). There are various nm-sized cavities formed between the polymer side-chains and rods. The changes in the H-bonding states of the C=O and NH groups of the polymer upon absorption of each of the five solvents at 25 degrees C are determined with ATR-IR. The IR wavenumbers, the H-bonding interaction energies, and the H-bonding distances of the polymer side-chains with each of the solvent molecules are predicted using the DFT/B3LYP/6-311+g(d,p) level of theory. The changes in the polymer crystallinity upon absorption of each solvent are characterized with XRD. The changes in the polymer crystallinity and the H-bonding states of C=O groups are also probed with (13)C CP/MAS solid-state NMR. The changes in the polymer side-chain mobility are detected using (13)C MAS solid-state NMR. The H-bonding states of the polymer change upon absorption of each polar solvent and usually result in an increase in the polymer crystallinity and the side-chain mobility. The polymer rods are reorganized upon solvent absorption, and the distance between the rods increases with the increase in the solvent molecular size. These results have implications for understanding the role of the solvent in modifying the structure and behavior of the polymer sorbents.