Rational design of methacrylate monomers containing oxadiazole moieties for single‐layer organic light emitting devices

Methacrylate derived monomers functionalized with pendant oxadiazole moieties were synthesized and copolymerized with carbazole containing monomers to form polymers with electron and hole transporting fragments in the same molecule. Substituents on the oxidazole moiety were varied with the purpose of bandgap tuning and performance optimization when employed in single‐layer organic light emitting devices (OLED). Quantum mechanical calculations of the HOMO‐LUMO levels of the oxidazole derivatives were used to down‐select promising candidates for chemical synthesis and testing in single‐layer OLEDs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1663–1673     

Hybrid silica-organic material with immobilized amino groups: surface probing and use for electrochemical determination of nitrite ions

A sol–gel based hybrid process was developed by manipulating different techniques in sol–gel process to synthesize γ-alumina and (CuO, CuO + ZnO) doped γ-alumina spherical particles. Catalysts having spherical geometry have an important advantage over powders or pellets which are impervious to fluids, when packed in a reactor. Boehmite sol was used as alumina precursor for synthesizing porous γ-alumina and doped materials. γ-alumina particles having 5 wt% CuO, 4 wt% CuO + 1 wt% ZnO, 3 wt% CuO + 2 wt% ZnO and 2 wt% CuO + 3 wt% ZnO were prepared by adding required amounts of Cu(NO₃)₂ and Zn(NO₃)₂ solutions prior to gelation of the sol. Methanol dehydration studies were carried out by employing these synthesized catalysts. Hundred percent conversion of methanol to dimethyl ether was observed with (4 wt% CuO + 1 wt% ZnO)-γ-alumina and (5 wt% CuO)-γ-alumina microspheres at 325 and 350 °C, respectively.     

Molecular Structure,Thermodynamic and Spectral Characteristics of Metal-Free and Nickel Complex of Tetrakis(1,2,5-thiadiazolo)porphyrazine

The Knudsen effusion method with mass spectrometric control of the vapor composition was used to study the possibility of a congruent transition to the gas phase and to estimate the enthalpy of sublimation of metal-free tetrakis(1,2,5-thiadiazolo)porphyrazine and its nickel complex (H₂TTDPz and NiTTDPz, respectively). The geometrical and electronic structure of H₂TTDPz and NiTTDPz in ground and low-lying excited electronic states were determined by DFT calculations. The electronic structure of NiTTDPz was studied by the complete active space (CASSCF) method, following accounting dynamic correlation by multiconfigurational quasi-degenerate second-order perturbation theory (MCQDPT2). A geometrical structure of D_2h and D_4h symmetry was obtained for H₂TTDPz and NiTTDPz, respectively. According to data obtained by the MCQDPT2 method, the nickel complex possesses the ground state ¹A_1g, and the wave function of the ground state has the form of a single determinant. Electronic absorption and vibrational (IR and resonance Raman) spectra of H₂TTDPz and NiTTDPz were studied experimentally and simulated theoretically.     

Acoustic analogue of electronic BLOCH oscillations and resonant Zener tunneling in ultrasonic superlattices

We demonstrate the existence of Bloch oscillations of acoustic fields in sound propagation through a superlattice of water cavities and layers of methyl methacrylate. To obtain the acoustic equivalent of a Wannier-Stark ladder, we employ a set of cavities with different thicknesses. Bloch oscillations are observed as time-resolved oscillations of transmission in a direct analogy to electronic Bloch oscillations in biased semiconductor superlattices. Moreover, for a particular gradient of cavity thicknesses, an overlap of two acoustic minibands occurs, which results in resonant Zener-like transmission enhancement.     

Molecular Characteristics and Antioxidant Activity of Spruce (Picea abies) Hemicelluloses Isolated by Catalytic Oxidative Delignification

Spruce (Picea abies) wood hemicelluloses have been obtained by the noncatalytic and catalytic oxidative delignification in the acetic acid-water-hydrogen peroxide medium in a processing time of 3–4 h and temperatures of 90–100 °C. In the catalytic process, the H₂SO₄, MnSO₄, TiO₂, and (NH₄)₆Mo₇O₂₄ catalysts have been used. A polysaccharide yield of up to 11.7 wt% has been found. The hemicellulose composition and structure have been studied by a complex of physicochemical methods, including gas and gel permeation chromatography, Fourier-transform infrared spectroscopy, and thermogravimetric analysis. The galactose:mannose:glucose:arabinose:xylose monomeric units in a ratio of 5:3:2:1:1 have been identified in the hemicelluloses by gas chromatography. Using gel permeation chromatography, the weight average molar mass M_w of hemicelluloses has been found to attain 47,654 g/mol in noncatalytic delignification and up to 42,793 g/mol in catalytic delignification. Based on the same technique, a method for determining the α and k parameters of the Mark–Kuhn–Houwink equation for hemicelluloses has been developed; it has been established that these parameters change between 0.33–1.01 and 1.57–472.17, respectively, depending on the catalyst concentration and process temperature and time. Moreover, the FTIR spectra of the hemicellulose samples contain all the bands characteristic of heteropolysaccharides, specifically, 1069 cm⁻¹ (C–O–C and C–O–H), 1738 cm⁻¹ (ester C=O), 1375 cm⁻¹ (–C–CH₃), 1243 cm⁻¹ (–C–O–), etc. It has been determined by the thermogravimetric analysis that the hemicelluloses isolated from spruce wood are resistant to heating to temperatures of up to ~100 °C and, upon further heating, start destructing at an increasing rate. The antioxidant activity of the hemicelluloses has been examined using the compounds simulating the 2,2-diphenyl-2-picrylhydrazyl free radicals.     

An Efficient Parallel Reverse Conversion of Residue Code to Mixed-Radix Representation Based on the Chinese Remainder Theorem

In this paper, we deal with the critical problems in residue arithmetic. The reverse conversion from a Residue Number System (RNS) to positional notation is a main non-modular operation, and it constitutes a basis of other non-modular procedures used to implement various computational algorithms. We present a novel approach to the parallel reverse conversion from the residue code into a weighted number representation in the Mixed-Radix System (MRS). In our proposed method, the calculation of mixed-radix digits reduces to a parallel summation of the small word-length residues in the independent modular channels corresponding to the primary RNS moduli. The computational complexity of the developed method concerning both required modular addition operations and one-input lookup tables is estimated as , where k equals the number of used moduli. The time complexity is modular clock cycles. In pipeline mode, the throughput rate of the proposed algorithm is one reverse conversion in one modular clock cycle.     

Electron Transport in Configurational Model of Ferromagnetic Fulleride with Triple Orbital Degeneracy

Abstract

Phenomenon of ferromagnetic ordering was for a long time associated exclusively with transition metal and rare-earth compounds. Nowadays this view is challenged by growing evidence that in molecular carbon-based systems the ferromagnetic alignment of spins can be observed as well. We have developed a microscopical model of a fulleride electronic subsystem taking into account triple orbital degeneracy of energy states within the configurational-operator approach. Using the Green function method the energy spectrum of the model has been calculated. Conditions for the ferromagnetic state stabilization have been determined. Static electrical conductivity and effective masses of current carriers in the system with orbitally degenerated energy band have been obtained. In the ground state and for low temperatures at different forms of unperturbed density of electronic states the concentration dependences of transport characteristics for less-then-half-filled lower quasiparticle subband have been calculated.     

On Truncated Matricial Stieltjes Type Moment Problems

We study two slightly different versions of truncated generalized matricial moment problems of Stieltjes type. A central topic is the construction and investigation of distinguished solutions of both moment problems under consideration. These solutions turn out to be nonnegative Hermitian Borel measures on the real axis which are concentrated on a finite number of points. Our approach is mainly algebraic. It is based on the use of particular matrix polynomials constructed from a nonnegative Hermitian block Hankel matrix.