Influence of inorganic mobile phase additives on the retention, efficiency and peak symmetry of protonated basic compounds in reversed-phase liquid chromatography

Inorganic eluent additives affect the retention of protonated basic analytes in reversed-phase HPLC. This influence is attributed to the disruption of the analyte solvation-desolvation equilibria in the mobile phase, also known as "chaotropic effect". With an increase of counteranion concentration analyte retention increases with concomitant decrease in the tailing factor. Different inorganic counteranions at equimolar concentrations affect protonated basic analyte retention and peak symmetry to varying degrees. The effect of the concentrations of four different inorganic mobile phase additives (KPF6, NaClO4, NaBF4, NaH2PO4) on the analyte retention, peak symmetry, and efficiency on a C8-bonded silica column has been studied. The analytes used in this study included phenols, toluene, benzyl amines, beta-blockers and ophthalmic drugs. The following trend in increase of basic analyte retention factor and decrease of tailing factor was found: PF6- > ClO4- approximately BF4- > H2PO4-. With the increase of the counteranion concentration greater analyte loading could be achieved and consequently an increase in the apparent efficiency was observed until the maximum plate number for the column was achieved. At the highest concentration of counteranions, the peak efficiency for most of the basic compounds studied was similar to that of the neutral markers. In contrast, the neutral markers, such as phenols, showed no significant changes in retention, efficiency or loading capacity as counteranion concentration was increased.     

Full-dimensional analytical ab initio potential energy surface of the ground state of HOI

Extensive ab initio calculations using a complete active space second-order perturbation theory wavefunction, including scalar and spin-orbit relativistic effects with a quadruple-zeta quality basis set were used to construct an analytical potential energy surface (PES) of the ground state of the [H, O, I] system. A total of 5344 points were fit to a three-dimensional function of the internuclear distances, with a global root-mean-square error of 1.26 kcal mol(-1). The resulting PES describes accurately the main features of this system: the HOI and HIO isomers, the transition state between them, and all dissociation asymptotes. After a small adjustment, using a scaling factor on the internal coordinates of HOI, the frequencies calculated in this work agree with the experimental data available within 10 cm(-1).     

Application of organoclays for the adsorption of recalcitrant organic molecules from aqueous media

Water purification is imperative for the welfare of a healthy population. Water is widely contaminated by recalcitrant organic chemicals such a pesticides, herbicides and hormones. One inexpensive method for purifying water from these types of molecules is through adsorption. One suite of materials for this adsorption is based upon organoclays. This paper reviews the adsorption of organics on organoclays.     

The dielectric response of interfacial water—from the ordered structures to the single hydrated shell

Water is the universal solvent in nature. Does this imply, however, that its interaction with its environment is also a universal feature? While this question maybe too fundamental to be answered by one method only, we present evidence that the broadening of the dielectric spectra of water presents universal features of dipolar interactions with different types of matrixes. If in aqueous solutions the starting point of water’s state can be considered as bulk, with only partial interactions with the solute, then the state of water adsorbed in heterogeneous materials is determined by various hydration centers of the inhomogeneous material (the matrix) and it is significantly different from the bulk. In both cases, the dielectric spectrum of water is symmetrical and can be described by the Cole–Cole (CC) function. The phenomenological model that describes a physical mechanism of the dipole–matrix interaction in complex systems underlying the CC behavior has been applied to water adsorbed in porous glasses. It was then extended to analyses of the dynamic and structural behavior of water in nonionic and ionic aqueous solutions. The same model is then used to analyze the CC relaxation processes observed in clays, aqueous solutions of nucleotides, and amino acids.     

Cage-shaped borate esters with tris(2-oxyphenyl)methane or -silane system frameworks bearing multiple tuning factors: geometric and substituent effects on their Lewis acid properties

Boron complexes that contain new tridentate ligands, tris(o‐oxyaryl)methanes and ‐silanes, were prepared. These complexes had a cage‐shaped structure around a boron center and showed higher Lewis acidity and catalytic activity than open‐shaped boron compounds. The cage‐shaped ligands determined the properties of the borates by altering the geometry and were consistently bound to the metal center by chelation. The synthesized compounds were L?B(OC₆H₄)₃CH, L?B(OC₆H₄)₃SiMe, and its derivatives (L=THF or pyridine as an external ligand). Theoretical calculations suggested that the cage‐shaped borates had a large dihedral angle (C_ipso‐O‐B‐O) compared with open‐shaped borates. The geometric effect due to the dihedral angle means that compared with open‐shaped, the cage‐shaped borates have a greater Lewis acidity. The introduction of electron‐withdrawing groups on the aryl moieties in the cage‐shaped framework increased the Lewis acidity. Substitution of a bridgehead Si for a bridgehead C decreased the Lewis acidity of the boron complexes because the large silicon atom reduces the dihedral angle of C_ipso‐O‐B‐O. The ligand‐exchange rates of the para‐fluoro‐substituted compound B(OC₆H₃F)₃CH and the ortho‐phenyl‐substituted compound B(OC₆H₃Ph)₃CH were less than that of the unsubstituted borate B(OC₆H₄)₃CH. The ligand‐exchange rate of B(OC₆H₄)₃SiMe was much faster than that of B(OC₆H₄)₃CH. A hetero Diels–Alder reaction and Mukaiyama‐type aldol reactions were more effectively catalyzed by cage‐shaped borates than by the open‐shaped borate B(OPh)₃ or by the strong Lewis acid BF₃?OEt₂. The cage‐shaped borates with the bulky substituents at the ortho‐positions selectively catalyzed the reaction with less sterically hindered substrates, while the unsubstituted borate showed no selectivity.     

From tetragermacyclobutene to tetragermacyclobutadiene dianion to tetragermacyclobutadiene transition metal complexes

The reaction of 3,4-dichlorotetragermetene derivative 2 with Na(2)[Fe(CO)(4)] in THF produced a (tetragermacyclobutadiene)tricarbonyliron complex, [{η(4)-((t)Bu(2)MeSi)(4)Ge(4)}]Fe(CO)(3)4, which has a slightly folded Ge(4) ring perhaptocoordinated to the Fe center. Structural and spectral characteristics of 4 show a remarkable π-donating ability of the tetragermacyclobutadiene ligand toward the transition metal, surpassing that of tetrasilacyclobutadiene and cyclobutadiene ligands. Reduction of 2 with KC(8) resulted in exclusive formation of the dipotassium salt of the tetragermacyclobutadiene dianion derivative 3(2-)·[K(+)(thf)(2)](2), representing a rare example of a 6π-electron compound that, on the basis of its structural and magnetic properties, was recognized as a nonaromatic species. Reaction of 3(2-)·[K(+)(thf)(2)](2) with CpCoI(2)(PPh(3)) produced a (cyclopentadienyl)(tetragermacyclobutadiene)cobalt complex, [{η(4)-((t)Bu(2)MeSi)(4)Ge(4)}]CoCp 7, as the first example of a sandwich compound featuring an all-germanium-containing cyclic polyene ligand.     

Hydrogels of poly(hydroxyethyl methacrylate) and hydroxyethyl methacrylate—glycerol monomethacry-late copolymers

Hydrophilic three-dimensional polymer networks (hydrogels) were prepared from hydroxyethyl methacrylate (HEMA) and the copolymer HEMA and glycerol monomethacrylate (GMMA). The equilibrium water content of the hydrogels in water was investigated as a function of the initial dilution of the polymerization mixture, the type of solvent, and the hydrophilicity of the polymer. The initial dilution was found to have a decisive effect on the swelling or deswelling of hydrogels after the completion of the gel formation. With relatively less hydrophilic hydrogels, there is a critical initial dilution to produce the gel which does not swell or deswell in water after the gel formation. This “isovolumic” initial dilution shifts toward a higher dilution as the hydrophilicity of the hydrogels increases; however, when hydrophilicity of the polymer rises above a certain point, gels always swell in water. Permeability of oxygen through hydrogels was also studied.     

Geographical distribution of plutonium derived from the atomic bomb in the eastern area of Nagasaki

In order to know the distribution of plutonium derived from the Nagasaki atomic bomb, soil samples were measured to determine the ²⁴⁰Pu/²³⁹Pu isotope ratio of and concentrations of ^239+240Pu and ¹³⁷Cs. The ^239+240Pu concentrations in soils, except for Nishiyama area, were close to the average concentration of soil collected in Japan. In soils collected at the Nishiyama area and at the eastern area of Nagasaki Prefecture and at part of northern area in Kumamoto Prefecture, the ²⁴⁰Pu/²³⁹Pu ratios were lower than the global fallout values. This suggests that plutonium from the atomic bomb was deposited in the eastern area from the hypocenter reaching up to 100 km eastwards.     

Molecular weight between entanglements for linear d-glucans

Dynamic viscoelasticity measurements were carried out for concentrated solutions of linear d-glucans in BmimCl to examine the effect of the linkage between repeating units of glucose on the rheological properties. The values of molecular weight between entanglements (M _e) were determined for four d-glucans: curdlan, pullulan, cellulose, and amylose. From the concentration dependence of M _e, the value of M _e in the molten state (M _e,melt) for each d-glucan was estimated as a material constant. The order of M _e,melt became cellulose?<?pullulan?<?curdlan?<?amylose, indicating that the linkage is actually influential in M _e,melt for the linear d-glucans. The relationship between M _e,melt and the molecular structure of the d-glucans were discussed assuming that the values of M _e,melt for the d-glucans primarily reflect the chain stiffness such as the characteristic ratio C _∞ on the analogy of synthetic polymers. Although the trend was not so clear, it was shown that N _unit is a decreasing function of C _∞ .