Superior Electrical Conductivity in Hydrogenated Layered Ternary Chalcogenide Nanosheets for Flexible All‐Solid‐State Supercapacitors

As the properties of ultrathin two‐dimensional (2D) crystals are strongly related to their electronic structures, more and more attempts were carried out to tune their electronic structures to meet the high standards for the construction of next‐generation smart electronics. Herein, for the first time, we show that the conductive nature of layered ternary chalcogenide with formula of Cu₂WS₄ can be switched from semiconducting to metallic by hydrogen incorporation, accompanied by a high increase in electrical conductivity. In detail, the room‐temperature electrical conductivity of hydrogenated‐Cu₂WS₄ nanosheet film was almost 10¹⁰ times higher than that of pristine bulk sample with a value of about 2.9×10⁴ S m^?1, which is among the best values for conductive 2D nanosheets. In addition, the metallicity in the hydrogenated‐Cu₂WS₄ is robust and can be retained under high‐temperature treatment. The fabricated all‐solid‐state flexible supercapacitor based on the hydrogenated‐Cu₂WS₄ nanosheet film shows promising electrochemical performances with capacitance of 583.3 F cm^?3 at a current density of 0.31 A cm^?3. This work not only offers a prototype material for the study of electronic structure regulation in 2D crystals, but also paves the way in searching for highly conductive electrodes.     

Acidic functionalized ionic liquids as catalyst for the isomerization of α-pinene to camphene

An acidic functionalized ionic liquids (ILs) [HSO₃-(CH₂)₃-NEt₃]Cl-ZnCl₂ was synthesized and used to catalyze the isomerization of α-pinene in a homogeneous system. The optimum conditions for isomerization were obtained as follows: n(α-pinene):n(ILs) = 9:1, reaction temperature 140 °C, and reaction time 4 h, α-pinene 0.04 mol. Under the optimal conditions, the conversion of α-pinene was 97.6 % and the selectivity for camphene could reach 64.8 %. In addition, the catalyst could be easily separated by centrifugation after the isomerization completely finished. When the ILs were repeatedly used for four times, the conversion of α-pinene and the selectivity for camphene were still excellent, indicating the superb recycle ability of the acidic functionalized ILs catalyst.     

Metal‐Assisted One‐Pot Synthesis of Isoporphyrin Complexes

Zinc and cadmium complexes of meso‐arylisoporphyrins carrying a pyrrolyl or dipyrrinyl substituent at the sp³ carbon atom were obtained through a simple one‐pot variation of the Alder–Longo porphyrin synthesis. Key to the formation and stabilization of isoporphyrins is the presence of metal acetates during the oxidative macrocyclization step. The characteristic Q‐bands of isoporphyrins are found in the NIR region between 750 nm and 880 nm. All of the isolated pyrrolyl‐ and dipyrrinyl‐appended isoporphyrins are stable under typical laboratory conditions and allow chemical transformations like BF₂ coordination, transmetalation, and ligand exchange.     

Identification of HcgC as a SAM‐Dependent Pyridinol Methyltransferase in [Fe]‐Hydrogenase Cofactor Biosynthesis

Previous retrosynthetic and isotope‐labeling studies have indicated that biosynthesis of the iron guanylylpyridinol (FeGP) cofactor of [Fe]‐hydrogenase requires a methyltransferase. This hypothetical enzyme covalently attaches the methyl group at the 3‐position of the pyridinol ring. We describe the identification of HcgC, a gene product of the hcgA‐G cluster responsible for FeGP cofactor biosynthesis. It acts as an S‐adenosylmethionine (SAM)‐dependent methyltransferase, based on the crystal structures of HcgC and the HcgC/SAM and HcgC/S‐adenosylhomocysteine (SAH) complexes. The pyridinol substrate, 6‐carboxymethyl‐5‐methyl‐4‐hydroxy‐2‐pyridinol, was predicted based on properties of the conserved binding pocket and substrate docking simulations. For verification, the assumed substrate was synthesized and used in a kinetic assay. Mass spectrometry and NMR analysis revealed 6‐carboxymethyl‐3,5‐dimethyl‐4‐hydroxy‐2‐pyridinol as the reaction product, which confirmed the function of HcgC.     

Graphene/BiOI composites synthesized via the oil bath method and their application for efficient photocatalytic degradation of methyl orange under visible light irradiation

An efficient and simple oil bath method for rapid synthesis of graphene/BiOI as visible light active photocatalyst was described. The resultant graphene/BiOI composites were characterized by different techniques, including scanning electron microscopy, X-ray diffraction, and ultraviolet-visible diffuse reflectance spectroscopy. The photocatalytic activity of the as-prepared graphene/BiOI composites for methyl orange degradation was also investigated under visible light irradiation. The results show that BiOI and graphene taken with a mass ratio of 100: 1 exhibited the highest photocatalytic efficiency, which is two times that of pure BiOI. Part of this effect results from higher specific surface area that provides an increased number of active sites. A relatively narrow band gap (2.08 eV) formed in the heterostructure can also contribute to this effect. A suggestion of the photocatalytic mechanism was also offered.     

Preparation of CuO/SiO<Subscript>2</Subscript> Hollow Spheres for Catalytic Oxidation of Phenol

Porous CuO/SiO₂ hollow microspheres were synthesized via an impregnation method using pure SiO₂ hollow microspheres as the supporter, and Cu species as the functional material. The hollow microspheres were characterized by X-ray diffraction, BET surface area, temperature-programmed reduction, transmission electron microscopy, and scanning electron microscopy. The catalytic activities of the CuO/SiO₂ hollow microspheres were investigated via the removal of the total chemical oxygen demand (COD) in the oxidation of phenol solution with air as an oxidant. The influence of various reaction parameters such as the reaction temperature, the partial pressure of O₂, and the initial pH of the solution were studied in detail. The coordination, dispersion and aggregation degree of copper species on porous materials play an important role for the COD removal of the phenol aqueous solution.     

Enantioselective Total Synthesis of (+)‐Steenkrotin A and Determination of Its Absolute Configuration

The first enantioselective total synthesis of (+)‐steenkrotin A has been achieved in 18 steps and 4.2 % overall yield. The key features of the strategy entail a Rh‐catalyzed O?H bond insertion followed by an intramolecular carbonyl‐ene reaction, two sequential SmI₂‐mediated Ueno–Stork and ketyl–olefin cyclizations, and a cascade intramolecular aldol condensation/vinylogous retro‐aldol/aldol process with inversion of the relative configuration at the C7 position. The absolute configuration of (+)‐steenkrotin A was determined based on the stepwise construction of the stereocenters during the total synthesis.     

Cadmium(II)–Triazole Framework as a Luminescent Probe for Ca2+ and Cyano Complexes

A bidentate ligand, 1‐{4‐[4‐(1H‐1,2,4‐triazol‐1‐yl)phenoxy]phenyl}‐1H‐1,2,4‐triazole (TPPT), has been designed and synthesized. By using TPPT as a building block for self‐assembly with Cd(NO₃)₂ ? 4 H₂O and CdCl₂ ? 10.5 H₂O, novel 1D double‐chain {[Cd(TPPT)(NO₃)₂] ? 3 H₂O}_n ( 1 ) and 2D (4,4) layer [Cd(TPPT)Cl₂(H₂O)]_n ( 2 ) have been constructed. When 1 was employed as a precursor and exposed to DMF or N,N′‐dimethylacetamide (DMAC), the crystals of 1 dissolved and reassembled into two types of brown block‐shaped crystals of 1D double chains: {[Cd(TPPT)₂(NO₃)₂] ? DMF}_n ( 1 a ) and {[Cd(TPPT)₂(NO₃)₂] ? DMAC}_n ( 1 b ). The anion‐exchange reactions of complex 2 have also been investigated. After gently stirring crystals of 2 in CHCl₃/C₂H₅OH/H₂O containing NaBr, NaI ? 2 H₂O, or NaOAc ? 3 H₂O, the crystals retained their crystalline appearances. A remarkable single crystal to single crystal transformation was observed and 1D double chains of {[Cd(TPPT)Br₂] ? C₂H₅OH}_n ( 2 a ) and {[Cd(TPPT)₂I₂] ? CHCl₃}_n ( 2 b ), and 1D single chains of [Cd(TPPT)(H₂O)₂(CH₃COO)₂]_n ( 2 c ), can be obtained. Luminescent properties indicate that 1 shows excellent selectivity for Ca²⁺ and cyano complexes. To the best of our knowledge, this is the first example of a luminescent probe for Ca²⁺ based on triazole derivatives.