Analysis of selected pesticides and alkylphenols in human cord blood by gas chromatograph-mass spectrometer

A total of seven pesticides and eight alkylphenols were monitored using this method for the determination of their trace levels in human cord blood. The pesticides are lindane, diazinon, α-endosulfan, β-endosulfan, endosulfan sulfate, chlorpyrifos and endrin; while the alkylphenols are 4-n-butylphenol, 4-n-pentylphenol, 4-n-hexylphenol, 4-t-octylphenol, 4-n-heptylphenol, nonylphenol, 4-n-octylphenol and bisphenol A. The pesticides and alkylphenols in the cord blood samples were extracted with solid phase extraction IST C18 cartridges and analyzed by selected ion monitoring mode using quadrapole detector in Shimadzu QP-5000 gas chromatograph-mass spectrometer. Trace levels of pesticide and alkylphenols in the range of non-detectable to 15.17 ng ml⁻¹, were detected in the human cord blood samples. This technique of monitoring the levels of endocrine-disruptors in blood samples is consistent, reliable and cost effective while reducing wastage of time and solvents.     

Partial oscillator strengths for the photoionization of N2O and CO2 (20–60 eV)

The photoelectron branching ratios and the partial oscillator strengths (cross sections) for photoionisation of the valence orbitals of N₂O and CO₂ have been obtained in the energy range 20–60 eV using the magic angle dipole (e, 2e) method. In addition to single electron ionization processes there is a large contribution from multiple electron transitions at higher energies in agreement with recent theoretical predictions. The photoionization efficiency and the dipole oscillator strenght for total photoabsorption have also been measured.     

Synthesis of C60-diphenylaminofluorene dyad with large 2PA cross-sections and efficient intramolecular two-photon energy transfer

The first, highly two-photon active C60 derivative comprised of a A-sp3-D conjugate structure was synthesized showing effective two-photon absorption cross-sections (sigma 2' = 196 x 10(-48) cm4 sec-1 molecule-1) in the nanosecond regime among the best values for diphenylaminofluorene-based AFX chromophores.     

4-乙烯基吡啶-镍(钴)及丙烯酰胺-镍(钴)的制备、结构、聚合及聚合物的催化性能

制备了4-乙烯基吡啶-镍(钴)和丙烯酰胺-镍(钴)络合物并研究了它们的结构。在自由基引发剂的作用下,4-乙烯基吡啶-镍可进行溶液聚合,也可与苯乙烯共聚合,测定了单体的竞聚率。所得的聚(4-乙烯基吡啶-镍)及聚(4-乙烯基吡啶-钴)以NaBH_4还原后可作为一些有机化合物的加氢催化剂。由IR及XPS分析说明在丙烯酰胺-镍络合物中,与镍离子发生了络合作用的是羧基上的氧原子。     

Reduced Overlap Population Analysis for Triosmium Clusters

The use of reduced overlap population (ROP) analysis from EHMO calculations as a means to gauge the presence of metal–metal bonds in triosmium clusters is examined. A number of triosmium clusters containing bridging ligands have been used as test cases, including the bis-ethoxy bridged cluster Os₃(μ-OEt)₂(CO)₁₀, 1b, and some of its group 15 derivatives Os₃(μ-OEt)₂(CO)₉(EPh₃), 2. These latter clusters are newly synthesized and have been characterized completely, including by single-crystal X-ray crystallographic studies. In honour of Professor Dieter Fenske on his 65th birthday.     

电解沉积压电频移分析的理论与验证

提出了控制电位电解和恒电流电解两类电解沉积的压电频移分析法测定的理论公式,用实验结果验证了它的正确性.     

Measurement of pH by flow injection over a wide dynamic range with PVC/neutral carrier electrodes

Two pH-sensitive neutral carrier/PVC electrodes are used simultaneously for the measurement of pH by flow injection. One of these is based on the neutral carrier tridodecylamine and the other on octadecyl isonicotinate, and together they allow the pH range 1–13 to be covered. These electrodes have been used in a very low dispersion miniature potentiometric flow cell designed specifically for use in flow injection in conjunction with a multi-channel data acquisition system. The effects of the solution ionic strength and buffer capacity on the pH measurement are discussed. A flow-injection manifold is proposed which can be used for high-accuracy pH measurements without ionic strength adjustment of the sample and for simultaneous pH and ion concentration measurements with ionic strength adjustment. This has been tested on some synthetic samples for the simultaneous determination of potassium and calcium and the measurement of pH.     

Aggregation of sodium 1-(n-alkyl)naphthalene-4-sulfonates in aqueous solution: micellization and microenvironment characteristics

In aqueous solution, the micellization and microenvironment characteristics of the micelle assemblies of three anionic surfactants, sodium 1-(n-alkyl)naphthalene-4-sulfonates (SANS), have been investigated by steady-state fluorescence and time-resolved fluorescence decay techniques using pyrene, Ru(bpy)3(2+), and 1,6-diphenyl-1,3,5-hexatriene as fluorescence probes. The critical micelle concentrations (cmc's), effective carbon atom numbers (neff's), hydrophilic-lipophilic balances (HLBs), mean micelle aggregation numbers, micropolarities, and microviscosities of these surfactant micelles have been determined. The logarithmic cmc of the alkylnaphthalene sulfonates decreases linearly with an increase in the neff. The logarithmic aggregation number of the alkylnaphthalene sulfonates increases linearly with an increase in the neff. However, in contrast to the alkylsufonates and the alkylbenzene sulfonates, the aggregation for these alkylnaphthalene sulfonate molecules is less sensitive to the increase in the neff. The micropolarity of these alkylnaphthalene sulfonate micelles is less sensitive to the increase in the alkyl chain length and is lower than that of sodium dodecyl sulfate (SDS). The microviscosity of these alkylnaphthalene sulfonate micelles increases with an increase in the alkyl chain length and is lower than those of nonionic surfactants and zwitterionic surfactants. These results suggest that naphthyl rings have a notable effect on the micellization of SANS.     

An automatic photometric method with high precision by gradually diluting a sample

An automatic photometric method to increase the precision of measurement is proposed, which is based on the injection of a very small volume of sample by rotary valve and the subsequent homogeneous mixing in a small reaction cell made of glass of the sample with a color-developing reagent gradually delivered by a syringe piston pump until the absorbance of the mixture approaches 0.434, where the lowest relative error in the concentration locates. This photometric method is characteristic of uniformly high precision, low sample and reagent consumption, and high sampling rate of 30 samples per h. The other advantages of this method include easy calibration with only one standard solution and no strict requirements on photometric components. While applied for the determination of cobalt ranging from 0.21 to 1.43 g 1(-1), the relative standard deviations are all below 0.4%.