N—磷酰化二肽的分光光度法测定

利用双缩脲试剂，在可见光区建立了Ｎ－磷酰化二肽、二肽以及磷酰化多肽的分光光度定量分析方法。在经典的双缩脲分光光度法的实验条件下，观察到Ｎ－磷酰化二肽、二肽与双缩脲试剂的复合物的最大吸收波长均为６２０ｎｍ及Ｎ－磷酰基对二肽有很强的增色作用。     

环状碳酸酯低聚物的合成及其开环聚合的研究

环状碳酸酯低聚物的合成及其开环聚合的研究陈雨萍魏玮李革（中国科学院化学研究所工程塑料国家重点实验室北京１０００８０）关键词环状碳酸酯低聚物，聚碳酸酯，开环聚合环状单体的开环聚合在合成高聚物方面具有突出的优点，即在聚合过程中没有副产物、热效应低、聚合...     

12-钼磷酸中水的存在状态及其热稳定性的质谱法研究

本文运用程序升温脱水-质谱计检测(TPD MS)和红外光谱测定(IR)法研究了12-钼磷酸(PMA)中水的存在状态及其热稳定性. 解迭了PMA的TPD MS谱, 发现PMA中存在有结合能量各异的7种水峰. 讨论了PMA中各种水的结合强度及其对Keggin结构稳定性的影响。     

流动注射氢化物石墨炉原子吸收法的应用研究 Ⅰ.——实验装置与分析性能

氢化物石墨炉联用技术的原理是先在较低温度下将氢化物蒸气通入石墨炉并分解沉积于石墨管的内表面,然后再在高温下原子化。该法能明显提高灵敏度,消除液相和气相干扰。本文采用自制的半自动氢化物石墨炉进样系统及流动注射氢化物发生器,直接在普通石墨炉上进行氢化物石墨炉分析,研究了部分元素的测定条件,建立的方法操作方便,灵敏度高,耗样少,线性范围宽,是一种值得推广的新方法。     

Black fungus derived aerogel with double faced properties

Black fungus aerogel (BFA) exhibited interesting double-faced properties. Weexplored the diverse properties of each side of the black fungus in three aspects:water contact angle measurements, liquid selective absorption capacity and air pollutant adsorption abilities.     

Theoretical Study of Ethanethiol Adsorption on HZSM-5 Zeolite

The density functional theory and the cluster model methods have been employed to investigate the interactions between ethanethiol and HZSM-5 zeolites. Molecular complexes formed by the adsorption of ethanethiol on silanol H3SiOH with two coordination forms, model Bronsted acid sites of zeolite cluster H3Si(OH)Al(OH)2SiH3 interaction with ethanethiol, aluminum species adsorbed ethanethiol have been comparatively studied. Full optimization and frequency analysis of all cluster models have been carried out using B3LYP hybrid method at 3-21G basis level for hydrogen atoms and 6-31G(d) basis set level for silicon, aluminum, oxygen, carbon, and sulfur atoms. The structures and energy changes of different coordination forms of H3Si(OH)Al(OH)2SiH3-ethanethiol, silanol-ethanethiol and Al(OH)3-ethanethiol have been studied. The calculated results showed the nature of interactions was van der Waals force as exhibited by not much change in geometric structures and properties. The preference order of ethanethiol adsorbed on HZSM-5 zeolite may be residual aluminum species, bridging hydroxyl groups and silanol OH groups from the adsorption heat. The adsorbed models of protonized ethanethiol on bridging hydroxyl OH groups and linear hydrogen bonded ethanethiol on bridging OH groups suggested in literature might not exist as revealed by this theoretical calculation. Possible adsorption models were obtained for the first time.     

Dynamic coating of a capillary with room-temperature ionic liquids for the separation of amino acids and acid drugs by capillary electrophoresis

A room-temperature ionic liquid (IL), 1-ethyl-3-methyl-imidazolium tetrafluoroborate (1E-3MI-TFB), used for the coating of a silica capillary enables one to reduce or invert the electroosmotic flow (EOF) in capillary zone electrophoresis. Excellent separations of amino acids and ary lalkanoic acids were obtained. Such separations could not be obtained in a naked capillary in the presence of the cationic surfactants cetyltrimethylammonium bromide (CTAB) or polycationic polymer hexadimethrine bromide (HDB). The results indicate that 1E-3MI-TFB not only modulates the EOF but also acts as a discriminator. Further experiments indicate that the interaction between hydrogen at C-2 carbon of IL and acid drugs plays an important role in the separation. The text was submitted by the authors in English.     

Thermal degradation kinetics of polyimide containing 2,6-benzobisoxazole units

A novel polyimide (PI) based on 2,6-bis(p-aminophenyl)-benzo[1,2-d;5,4-d′]bisoxazole has been synthesized via a conventional two-stage procedure with bis(ether anhydrides) (HQDPA). The intermediate poly(amic acid) had inherent viscosities of 1.70 dl/g and could be thermally converted into light yellow polyimide film. The resulted polyimide showed excellent thermal stability, and the glass transition temperatures (T_g) were above 283 °C, the 5% weight loss temperature of the polymer was at 572 °C in N₂. The thermal degradation of the polyimide was studied by thermogravimetric analysis (TGA) in order to determine the actual reaction mechanisms of the decomposition process. The activation energy of the solid-state process was determined using Flynn-Wall-Ozawa method, which does not require knowledge of the reaction mechanism, which resulted to be 361.36 kJ/mol. The activation energy of different mechanism models and pre-exponential factor (A) were determined by Coats-Redfern method. Compared with the value obtained from the Ozawa method, the actual reaction mechanism obeyed nucleation and growth model, Avrami-Erofeev function (A₃) with integral form g(X) = [−ln(1−X)]³.     

Anion and Additive Effects on the Structure of Mercury(II) Halides Complexes with Tripodal Ligand

The metal complexes [Hg₂(tbim)₂Br₄]·2DMF ( 1 ) and [Hg₂(tbim)I₄]·1.5DMF ( 2 ) were prepared by reactions of 1,3,5‐tris(benzimidazol‐1‐ylmethyl)‐2,4,6‐trimethylbenzene (tbim) with HgBr₂, HgI₂, respectively, and [Hg₂(tbim)I₄]·0.5(FeCp₂)·H₂O ( 3 ) was obtained by the same method with addition of ferrocene (FeCp₂) as additive. Their structures were determined by X‐ray crystallographic analyses. Complex 1 has a macrocyclic binuclear structure with one benzimidazole arm of the ligand free of coordination and the binuclear units are further connected by C‐H···N hydrogen bonds to give an infinite zigzag chain. Complexes 2 and 3 have a 2D network structure in which tbim serves as a tridentate ligand. The results showed that the halides of bromide and iodide have remarkable impact on the structure of the complexes. The FeCp₂ molecules are trapped in the voids of framework 3 .     

Monte Carlo simulation of adsorption of binary and quaternary alkane isomers mixtures in zeolites: Effect of pore size and structure

Grand canonical Monte Carlo and configurational bias Monte Carlo techniques were employed to simulate the adsorption of binary mixtures of butane isomers and quaternary mixtures in nine zeolites at 300 K. For binary mixtures the results show there is a critical pore size, which is 10-membered-ring about 5.6 Å. The channel sizes of BEA, ISV, MOR and CFI are larger than this critical pore size, they prefer i-butane than n-butane, whereas TON with smaller channel size than critical pore size prefers n-butane than i-butane, but its selectivity decreases with pressure increasing. MFI, MEL and TER prefer i-butane than n-butane at low pressure, but with pressure increasing, the selectivity is reversed. BOG prefers i-butane than n-butane but the selectivity decreased with pressure increasing. It demonstrates that the adsorption and selectivity are controlled by both pore size and pore structure. The n-butane–i-butane–n-pentane–2-methylbutane quaternary mixtures adsorbed in these nine zeolites were studied, and the results show alkane chain length dependence at low pressure, but the adsorption is controlled by pore size and structure with pressure increasing in all the zeolites except for TON and BOG.