Kinetics and mechanisms of the reactions of hypochlorous acid,chlorine, and chlorine monoxide with bromite ion

The reaction between BrO2(-) and excess HOCl (p[H+] 6-7, 25.0 degrees C) proceeds through several pathways. The primary path is a multistep oxidation of HOCl by BrO(2)(-) to form ClO(3)(-) and HOBr (85% of the initial 0.15 mM BrO(2)(-)). Another pathway produces ClO(2) and HOBr (8%), and a third pathway produces BrO(3)(-) and Cl(-) (7%). With excess HOCl concentrations, Cl(2)O also is a reactive species. In the proposed mechanism, HOCl and Cl(2)O react with BrO(2)(-) to form steady-state species, HOClOBrO(-) and ClOClOBrO(-). Acid facilitates the conversion of HOClOBrO(-) and ClOClOBrO(-) to HOBrOClO(-). These reactions require a chainlike connectivity of the intermediates with alternating halogen-oxygen bonding (i.e. HOBrOClO(-)) as opposed to Y-shaped intermediates with a direct halogen-halogen bond (i.e. HOBrCl(O)O(-)). The HOBrOClO(-) species dissociates into HOBr and ClO(2)(-) or reacts with general acids to form BrOClO. The distribution of products suggests that BrOClO exists as a BrOClO.HOCl adduct in the presence of excess HOCl. The primary products, ClO(3)(-) and HOBr, are formed from the hydrolysis of BrOClO.HOCl. A minor hydrolysis path for BrOClO.HOCl gives BrO(3)(-) and Cl(-). An induction period in the formation of ClO(2) is observed due to the buildup of ClO(2)(-), which reacts with BrOClO.HOCl to give 2 ClO(2) and Br(-). Second-order rate constants for the reactions of HOCl and Cl(2)O with BrO(2)(-) are k(1)(HOCl) = 1.6 x 10(2) M(-1) s(-1) and k(1)(Cl)()2(O) = 1.8 x 10(5) M(-)(1) s(-)(1). When Cl(-) is added in large excess, a Cl(2) pathway exists in competition with the HOCl and Cl(2)O pathways for the loss of BrO(2)(-). The proposed Cl(2) pathway proceeds by Cl(+) transfer to form a steady-state ClOBrO species with a rate constant of k(1)(Cl2) = 8.7 x 10(5) M(-1) s(-1).     

Solid-Phase Extraction and Spectrophotometric Determination of Trace Amounts of Mercury in Natural Samples

A sensitive and selective solid phase spectrophotometric method for the determination of trace amounts of inorganic mercury is described. Hg²⁺ was sorbed on a silica gel-packed column as an Hg²⁺–N,N-bis(2-mercaptophenyl)ethanediamide (H₂L) complex. The Hg²⁺ complex was eluted from the column using 7mL of acetone. Various parameters including pH, column flow rate, and ligand concentration were optimized. The complex was found to obey Beers law from 2.3 to 73.7µgmL^–1 within the optimum range when the preconcentration factor was two. The effective molar absorption coefficient at 523nm was 1.17×10³Lmol^–1cm^–1 at 523nm. The concentration limits in Beers law dropped from 0.09 to 2.95µgmL^–1 within the optimum range when the preconcentration factor was 50. The relative standard deviation at a concentration level of 5µgmL^–1 Hg²⁺ (9 repetitive determinations) was 1.6%. The detection limits are 0.34µgmL^–1 and 0.015µgmL^–1 when the preconcentration factors are 2 and 50, respectively. The method has been used for routine determination of trace levels of Hg²⁺ in natural waters. The potential application of this method for the removal of Hg²⁺ from natural samples (sea water and lake water) spiked with 100ngmL^–1 of Hg²⁺ was studied. In order to validate the proposed method, LGC 6156 (harbour sediment – extractable metals) was analysed by this method. The results proved that excellent extraction of Hg²⁺ from both natural water samples was obtained by solid phase extraction using N,N-bis(2-mercaptophenyl) ethanediamide.     

Investigation of the properties of oil at the bleaching unit of an oil refinery

Color removal from neutralized sunflower oil was studied with different kinds of commercial bleaching earths. The effect of changes in time (25 and 35 min), temperature (80-125 degrees C), and bleaching earth dosage (0.1-0.9% by weight) on color, chlorophyll and carotene concentrations, and oxidation degree were investigated. To obtain adsorption curves from coloring compounds adsorbed onto activated bleaching earths, the Langmuir and Freundlich equations was used, the constant parameters and correlation coefficient R were calculated for each type of bleaching earth, and color changes were explained by both adsorption isotherms. It was observed that an increase in bleaching earth dosage decreases color. Its effect on oxidation state, however, is complex and related to both primary and secondary oxidation products. In addition, an increase in temperature seems to decrease chlorophyll and carotene adsorptions. Generally, time beyond equilibrium is considered useless for the removal of unwanted components. This study also confirms this claim and reveals that the peroxide value does not indicate the oxidation state of the oil completely.     

Reaktionen mit cyclischen Oxalylverbindungen,XXIV. Zur Reaktion von 4-Benzoyl-5-phenyl-furan-2,3-dion mit Phenylhydrazonen bzw. Phenylhydrazin

4-Benzoyl-5-phenyl-furan-2,3-dione (1) reacts with various phenylhydrazones2 at 60–80°C to the pyrazole carboxylic acid3 a, which then can be decarboxylated to 4-benzoyl-1,5-diphenyl-pyrazole (5).1 and phenylhydrazine combine again yielding3 a as the main product and the isomeric pyridazinone6 as by-product. At higher temperatures (120–140°C) the reaction of1 with2 a leads to the formation of dibenzoyl acetic acid hydrazide derivatives8.The structures of all products were confirmed by IR, MS,¹⁵N- and¹³C-NMR spectroscopic measurements, in the case of the pyridazinone6 also by an X-ray study.6 crystallizes with one moleDMSO monoclinically in space group P 2₁/n (Nr. 14) with 4 molecules6 andDMSO per cell.The reaction pathways leading to the compounds3, 6 and8 are discussed.

     

High performance capillary electrophoresis method for determination of ibuprofen enantiomers in human serum and urine

A direct and stereospecific capillary zone electrophoresis (CZE) method for quantification ibuprofen enantiomers in biological matrices: human serum and urine, has been developed. Chiral separation of the enantiomers of ibuprofen and (+)-S-indobufen [(+)-S-INDB, internal standard, IS] was obtained in an uncoated silica capillary filled with a background electrolyte (BGE), consisted of heptakis 2,3,6-tri-O-methyl-β-cyclodextrin (TM-β-CD) in buffer of pH 5.0. The complete enantioselective analysis of ibuprofen and its 1-hydroxy metabolite confirmed appropriate specificity of the method. The electrophoretic parameters: electroosmotic (μ_EOF) and electrophoretic (μ_ep) mobility and resolution factor (R_s) were determined. Extraction procedures with organic solvent and solid phase extraction (SPE) with C₁₈ stationary phase for isolation of enantiomers from biological fluids were compared. SPE method for further studies was chosen. Stereoselective extraction of IBP enantiomers from serum at basic pH has been discovered. Validation of the method was carried out. Calibration curves of ibuprofen enantiomers were linear in the range of 0.1-25.0 μg/ml in serum and of 0.5-250.0 μg/ml in urine. Recovery of both enantiomers from serum and urine amounted 74-86 and 90-98%, respectively. Intra- and inter-day measurement precision and accuracy were below 15%. Limits of detection for IBP enantiomers amounted 0.05 and 0.25 μg/ml in samples of serum and urine, respectively. Limit of quantitation was also estimated. IBP enantiomers proved to be stable following three freeze and thaw cycles and during storage in autosampler at ambient temperature. The validated methods enable pharmacokinetic studies of enantiomers in both media. The elaborated HPCE method can be alternative to HPLC.     

Studies on the reactions of cyclic oxalyl compounds with hydrazines or hydrazones : Synthesis and reactions of 4‐benzoyl‐1‐(3‐nitrophenyl)‐5‐phenyl‐1H‐pyrazole‐3‐carboxylic acid

The 1H‐pyrazole‐3‐carboxylic acid 2 , obtained from the furan‐2,3‐dione 1 and N‐Benzylidene‐N'‐(3‐nitrophenyl) hydrazine, was converted via reactions of its acid chloride 3 with various alcohols or N‐nucleo‐philes into the corresponding ester or amide derivatives 4 or 5 , respectively. Nitrile 6 and anilino‐pyrazole acid 7 derivatives of 2 were also obtained by dehydration of 5a in a mixture of SOCl₂ with DMF and reduction of 2 with sodium polysulphide, respectively. While cyclocondensation reactions of 2 or 7 with phenyl hydrazine or hydrazine hydrate and 6 with only anhydrous hydrazine lead to derivatives of pyrazolo[3,4‐d]‐pyridazinone 8 and pyrazolo[3,4‐d]pyridazine amine 9 , respectivel. The reaction of 2 with 2‐hydrazinopyri‐dine provided hydrazono‐pyrazole acid derivative 10 , which was decarboxylated to give hydrazono‐pyra‐zole derivative 11 . Pyrazolo[4,3‐d]oxazinone 12 and 2‐quinolyl pyrazolo[3,4‐d]pyridazine 13 derivatives were also prepared by cyclocondensation reactions of 2 with hydroxylamine hydrochloride and 7 with acetaldehyde, respectively.     

Stereospecific synthesis of a new class of aminocyclitol with the conduramine D-2 configuration

A new aminocyclitol derived from bicyclo[4.2.0^1,6]octane was synthesized starting from cyclooctatetraene. Photooxygenation of trans-7,8-diacetoxy-bicyclo[4.2.0]octa-2,4-diene afforded a bicyclic endoperoxide. Reduction of the endoperoxide with thiourea followed by a palladium-catalyzed ionization/cyclization reaction gave an oxazolidinone derivative. Oxidation of the double bond in the oxazolidinone with KMnO₄ followed by acetylation gave the oxazolidinone-tetraacetate whose exact configuration was determined by X-ray diffraction analysis. Hydrolysis of the oxazolidinone ring and removal of the acetate groups furnished the desired aminocyclitol.     

DNA and PNA sensing on mercury and carbon electrodes by using methylene blue as an electrochemical label

Described here are the electrochemical parameters for MB on binding to DNA at hanging mercury drop electrode (HMDE), glassy carbon electrode (GCE), and carbon paste electrode (CPE) in the solution and at the electrode surface. MB, which interacts with the immobilized calf thymus DNA, was detected by using single-stranded DNA-modified HMDE or CPE (ssDNA-modified HMDE or CPE), bare HMDE or CPE, and double-stranded DNA-modified HMDE or CPE (dsDNA-modified HMDE or CPE) in combination with adsorptive transfer stripping voltammetry (AdTSV), differential pulse voltammetry (DPV), and alternating current voltammetry (ACV) techniques. The structural conformation of DNA and hybridization between synthetic peptide nucleic acid (PNA) and DNA oligonucleotides were determined by the changes in the voltammetric peak of MB. The PNA and DNA probes were also challenged with excessive and equal amount of noncomplementary DNA and a mixture that contained one-base mismatched and target DNA. The partition coefficient was also obtained from the signal of MB with probe, hybrid, and ssDNA-modified GCEs. The effect of probe, target, and ssDNA concentration upon the MB signal was investigated. These results demonstrated that MB could be used as an effective electroactive hybridization indicator for DNA biosensors. Performance characteristics of the sensor are described, along with future prospects.     

The influence of aqueous versus glassy solvents on protein dynamics: vibrational echo experiments and molecular dynamics simulations

Spectrally resolved infrared stimulated vibrational echo measurements are used to measure the vibrational dephasing of the CO stretching mode of carbonmonoxy-hemoglobin (HbCO), a myoglobin mutant (H64V), and a bacterial cytochrome c(552) mutant (Ht-M61A) in aqueous solution and trehalose glasses. The vibrational dephasing of the heme-bound CO is significantly slower for all three proteins embedded in trehalose glasses compared to that of aqueous protein solutions. All three proteins exhibit persistent but notably slower spectral diffusion when the protein surface is fixed by the glassy solvent. Frequency-frequency correlation functions (FFCFs) of the CO are extracted from the vibrational echo data to reveal that the structural dynamics, as sensed by the CO, of the three proteins in trehalose and aqueous solution are dominated by fast (tens of femtoseconds), motionally narrowed fluctuations. MD simulations of H64V in dynamic and "static" water are presented as models of the aqueous and glassy environments. FFCFs are calculated from the H64V simulations and qualitatively reproduce the important features of the experimentally extracted FFCFs. The suppression of long time scale (picoseconds to tens of picoseconds) frequency fluctuations (spectral diffusion) in the glassy solvent is the result of a damping of atomic displacements throughout the protein structure and is not limited to structural dynamics that occur only at the protein surface. The analysis provides evidence that some dynamics are coupled to the hydration shell of water, supporting the idea that the bioprotection offered by trehalose is due to its ability to immobilize the protein surface through a thin, constrained layer of water.