Surface structure and photoluminescence properties of AZO thin films on polymer substrates

Al‐doped zinc oxide (AZO) thin films were deposited on indium tin oxide (ITO) coated polyethylene terephthalate (PET) substrates by radio frequency (RF) magnetron sputtering method at room temperature. The effects of film thickness on the surface structure and the photoluminescence properties of the films were investigated by atomic force microscopy (AFM), secondary ion mass spectroscopy (SIMS) and room temperature photoluminescence (PL). AFM analysis showed that the surface of all films was extremely flat and uniform at nanoscale. Root mean square (RMS) value of the surface roughness which scanned the surface area of 3 µm by 3 µm and grain size increased with increasing the film thickness. Thus, the surface morphology of the films became rough because of the coarse grains. The depth profile of AZO layers was analyzed by SIMS. It was found that the thickness of the AZO layer is almost same with the desired film thickness. The PL intensity of the dominant peak decreased and shifted slightly towards the shorter wavelengths with increasing the film thickness. According to the relationships between luminescence intensity and crystalline characteristics, it was observed that the intensity of the peak decreased by the increased surface area of the grains. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis, experimental and theoretical characterization of palladium(II) and platinum(II) saccharinate complexes with 2-(2-pyridyl)benzimidazole

New palladium(II) and platinum(II) complexes of saccharinate (sac) with 2-(2-pyridyl)benzimidazole (pybim) have been synthesized and characterized by elemental analysis and spectroscopic techniques. From the experimental studies, these complexes were formulated as [Pd(pybim)(sac)2] (1), and [Pt(pybim)(sac)2]·4H2O (2). The ground-state geometries of both complexes were optimized using density functional theory (DFT) methods at the B3LYP level. A bidentate pybim ligand together with two N-coordinated sac ligands form the square-planar MN4 coordination geometry around the palladium(II) and platinum(II) ions. The calculated IR and UV-vis spectral data have been correlated to the experimental results. Thermal analysis data support the molecular structures of both complexes.     

A Nanotubular Metal–Organic Framework with a Narrow Bandgap from Extended Conjugation**

A one-dimensional nanotubular metal–organic framework (MOF) [Ni(Cu-H₄TPPA)]⋅2 (CH₃)₂NH₂⁺ (H₈TPPA=5,10,15,20-tetrakis[p-phenylphosphonic acid] porphyrin) constructed by using the arylphosphonic acid H₈TPPA is reported. The structure of this MOF, known as GTUB-4 , was solved by using single-crystal X-ray diffraction and its geometric accessible surface area was calculated to be 1102 m² g⁻¹, making it the phosphonate MOF with the highest reported surface area. Due to the extended conjugation of its porphyrin core, GTUB-4 possesses narrow indirect and direct bandgaps (1.9 eV and 2.16 eV, respectively) in the semiconductor regime. Thermogravimetric analysis suggests that GTUB-4 is thermally stable up to 400 °C. Owing to its high surface area, low bandgap, and high thermal stability, GTUB-4 could find applications as electrodes in supercapacitors.     

The Synthesis and Acid-Catalyzed Hydrolysis of N-(4-Substitutedphenyl)-O-Benzenedisulfonimides

Abstract

The acid catalyzed hydrolyses of some cyclic disulfonimides, N-(4-substitutedphenyl)-o-benzenedisulfonimides (1a–d) have been studied in concentrated aqueous acidic solutions. Analysis of the data by the Excess Acidity Method, activation parameters, substituent, and solvent deuterium isotope effect are all indicate hydrolysis by an A-1 mechanism in the studied range.     

Functionalization and cyclization reactions of 4-benzoyl-1,5-diphenyl- 1H-pyrazole-3-carboxylic acid

The 1H-pyrazole-3-carboxylic acid 2 or its remarkably stable acid chloride 3 can easily be converted into the corresponding ester or amide derivatives 4 or 5, respectively, from reaction with alcohols or N-nucleophiles. Pyrazolo[3,4-d]pyridazines 6a,b are obtained from cyclocondensation reactions of the pyrazoles 2 and 3, respectively, with phenylhydrazine or hydrazine hydrate, while 6c is formed in an one-pot procedure from the furan-2,3-dione 1 and hydrazine hydrate.     

Conductivity spectra of polyphosphazene-based polyelectrolyte multilayers

Polyelectrolyte multilayers are built up from ionically modified polyphosphazenes by layer-by-layer assembly of a cationic (poly[bis(3-amino-N,N,N-trimethyl-1-propanaminium iodide)phosphazene] (PAZ+) and an anionic poly[bis(lithium carboxylatophenoxy)phosphazene] (PAZ-). In comparison, multilayers of poly(sodium 4-styrenesulfonate) (PSS) and poly(allylamine hydrochloride) (PAH) are investigated. Frequency-dependent conductivity spectra are taken in sandwich geometry at controlled relative humidity. Conductivity spectra of ion-conducting materials generally display a dc plateau at low frequencies and a dispersive regime at higher frequencies. In the present case, the dispersive regime shows a frequency dependence, which is deviating from the typical behavior found in most ion-conducting materials. Dc conductivity values, which can be attributed to long-range ionic transport, are on the order of sigmadc = 10-10-10-7 S.cm-1 and strongly depend on relative humidity. For PAZ+/PAZ- multilayers sigmadc is consistently larger by one decade as compared to PSS/PAH layers, while the humidity dependence is similar, pointing at general mechanisms. A general law of a linear dependence of log(sigmadc) on relative humidity is found over a wide range of humidity and holds for both multilayer systems. This very strong dependence was attributed to variations of the ion mobility with water content, since the water content itself is not drastically dependent on humidity.     

Acid‐catalyzed hydrolysis of 5‐substituted‐1H,3H‐2,1,3‐benzothiadiazole 2,2‐dioxides (5‐substituted benzosulfamides): kinetic behavior and mechanistic interpretations

The acid‐catalyzed hydrolysis of a series of 5‐substituted‐1H,3H‐2,1,3‐benzothiadiazole 2,2‐dioxides has been investigated in aqueous solutions of sulfuric, perchloric, and hydrochloric acid at 85.0 ± 0.05 °C. Analysis of the kinetic data by the excess acidity method, Arrhenius parameters, the order of the catalytic effects of strong acids, the kinetic deuterium isotope effect, and the substituent effect have indicated that the hydrolysis of 5‐substituted benzosulfamides 1a , 1b , 1c , 1d occur with a mechanistic switchover from A2 to A1 in the studied range: an A2 mechanism in low acidity regions and an A1 mechanism in high acid concentrations. Copyright © 2015 John Wiley & Sons, Ltd.     

4,5-, 3,6-, and 3,4,5,6-tert-Butylsulfanylphthalonitriles: synthesis and comparative structural and spectroscopic analyses

Three tert-butylsulfanylphthalonitriles have been prepared with optimized synthetic procedures. Their comparative structural analyses have been completed, with a focus on IR and NMR spectroscopy and refined X-ray structural data. Miscellaneous parameters such as UV absorption, melting points, and related polarity of the compounds are summarized.     

浅谈三相异步电动机软起动器的性能及应用

介绍了软起动的工作原理、技术特点、产品及应用．并把软起动与相关设备进行了比较．说明了软起动是集电动机软起动和多种保护功能于一体的电机控制装置，具有传统起动方式所不具备的优点．     

Comparative performance of different urea coating materials for slow release

Approximately 70%of the applied urea fertilizer may be lost into the environment.This loss is due to leaching,decomposition and ammonium volatilization in soil,water and air.Through coating,the slow release technology can be used to reduce losses and to increase the fertilizer efficiency.Sulfur has been used as a coating material,but the coating cracks easily because of its friability,sometimes being peeled off from the urea surface.In this study,four types of materials,namely,gypsum,cement,sulfur and zeolite,were mixed and used as coating materials to search for the most effective and cheap coating materials.The primary reasons for selecting these materials were improving fruit quality and preventing plant diseases,providing a plant nutrient,increasing soil fertility and water retention.The materials were also selected based on their availability,processiblity and price.The effects of the coating materials,thickness,drying time,sieving and sealant on the crushing strength and dissolution rate of urea were investigated.Coated urea with the same proportion of gypsum-sulfur exhibited high crushing strength and lower dissolution rate.However,the performance was further enhanced by applying molten paraffin wax on the hot urea surface.SEM images demonstrated that the micro-structure of gypsum-sulfur coated urea after sieving resulted in a smoother coated layer.The efficiency of the coated urea was improved by26%using gypsum-sulfur（20%total coating）,3%paraffin wax and sieving the coating materials before application.