Synthesis and Structures of Titanosiloxane Cage Compounds

Reaction of (triphenylmethyl)silanetriol (1) with cyclopentadienyltitanium trichloride (CpTiCl₃) in the presence of triethylamine as a HCl scavenger gave both compounds of a partial open-cage type {[Ph₃CSiO(OH)]₃(Ph₃CSiO_3/2)(CpTiO_3/2)₄} (2) and cube type (Ph₃CSiO_3/2CpTiO_3/2)₄ (3). The 1:1 reaction of 1 and CpTiCl₃ in toluene solvent at reflux temperature for 3 d afforded compounds 2 (22%) and 3 (36%). When 1 is reacted with a 1.5 fold excess of CpTiCl₃ under the same conditions, compound 3 was obtained in high yield (81%) along with 2 in trace quantities. Compounds 2 and 3 were fully characterized by the analyses of ¹H, ¹³C, ²⁹Si NMR, IR, and FAB MS data. The solid-state structure of 3 was determined by a single crystal X-ray diffraction study. Compound 3 had shown to have catalytic activity for the oxidation of alkenes such as 1-octene, cyclooctene, and norbornene with t-butyl hydrogen peroxide. The effect of solvent was observed in this epoxidation reaction. The order of reactivity were decreased as follows: CHCl₃ > hexane THF.     

Study on the anodic reaction of Ni in an alkaline solution by transient pH detection based on scanning electrochemical microscopy (SECM)

The anodic reaction of Ni in an alkaline solution was studied by the tip–substrate voltammetry mode of scanning electrochemical microscopy (SECM) and cyclic voltammetry (CV). A platinum microdisc electrode was selected as the tip electrode, which functioned as a pH sensor with transient response capability. The pH value of the solution near the Ni electrode surface varied while the Ni substrate oxidation reaction occurred, and the pH variation could be detected by the tip faradic current. The cyclic voltammogram results showed that two types of hydroxides: i.e. α‐Ni(OH)₂ and β‐Ni(OH)₂ were formed during Ni oxidation in the lower potential region. In the proceedings of α‐Ni(OH)₂ → γ‐NiOOH and β‐Ni(OH)₂ → β‐NiOOH, the process of OH^? concentration decrease in the solution was ahead and behind of electron transfer in the solid phase, respectively. These results indicate that the OH^? adsorption process occurs as an elementary step in the former reaction and the H⁺ diffusion process from the inner to the outer layer of the solid phase occurs as a subsequent step in the latter reaction. The results also revealed that the oxide film on the Ni surface has a two‐layer structure. The real potential of the oxygen evolution reaction (OER) on the Ni surface with different cycles is also analyzed in the paper. Copyright © 2007 John Wiley & Sons, Ltd.     

Swelling kinetics and release characteristic of crosslinked chitosan: Polyether polymer network (semi-IPN) hydrogels

The aqueous swelling kinetics of a series of crosslinked chitosan (cr-CS) with glutaraldehyde (GA) interpenetrating polyether hydrogels have been studied as functions of pH, the N-deacetylation degree of chitosan, the amount of crosslinking agent, the electrolyte composition in solution, temperature, and gel composition. Based on these results, the swelling mechanism of the hydrogels was discussed. The release profiles of chlorhexidini acetas from the semi-IPN were also investigated. © 1994 John Wiley & Sons, Inc.     

Stereochemistry of cytidine: conformational analysis and hydrogen bonding

The energy calculations using the INDO molecular orbital method and classical potential function show that the syn conformation of pyrimidine nucleosides having the C_(2')-endo or C_(2')-endo-C_(3')-endo sugar ring puckering is as stable as the corresponding anti form.The O_(2')-O_(2') base-ribose hydrogen bonding significantly alters the Φ_CN conformation by confining the allowed Φ_CN ranges to about 150–210°.     

Surface composition and property of film prepared with aqueous dispersion of polyurethaneurea-acrylate including fluorinated block copolymer

The aqueous dispersion of polyurethaneurea-acrylate (PUA) including small amount of fluorinated block copolymers containing carboxyl groups (PATF), which can be dissolved in water, was used to make films and the surface properties of these films were examined. The experimental data show that the modified PUA film exhibits a hydrophobic surface property, although the original surface of PUA film is hydrophilic. The surface composition of the modified PUA film was measured by ATR and XPS. The results indicate that there is a concentration gradient of the fluorine groups along the lines of thickness of the modified film and towards the outmost surface layer, resulting from the migration of fluorinated blocks to the air side surface of the modified PUA film during the film formation process. However, the PUA film can not be modified effectively by adding the sodium salt of PATF, since the urethane groups in the system are easy to occupy on the surface of the film.     

凝胶型聚合物电解质的电导率与温度的关系

凝胶型聚合物电解质的电导率与温度的关系孙晓光，林云青，齐力，景遐斌，王佛松（中国科学院长春应用化学研究所长春１３００２２）关键词凝胶电解质，离子电导率，活化能无定形聚合物电解质电导与温度的依赖关系一般可用Ｖｏｇｅｌ－Ｔａｍｍａｎ－Ｆｕｌｃｈｅｒｃ（Ｖ...     

Studies on the Complexes of N,N′-Bis[o-(diphenylphosphino)benzylidene]ethylenediamine with Transition Metal Ions

The thermodynamic parameters for the interaction of Cu²⁺, Ni²⁺, Co²⁺, Cd²⁺, andAg⁺ with the new title ligand have been determined by titration calorimetry in 50% THF–methanol (V/V) at 25 °C.Ag⁺ exhibited remarkably higher complexation selectivity.Ag⁺ and several transition metal ions have been transportedusing this ligand as carrier in a bulk liquid membrane. CompetitiveAg⁺–M²⁺ transport studies have also beencarried out for the same system. In this membrane transport study, high transport of Ag⁺ was observed in both single and competitiveAg⁺–M²⁺ transport studies. The complexformation of N,N-bis[o-(diphenylphosphino)benzylidene]ethylenediamine (P₂N₂) with silver,[Ag(P₂N₂)] (NO₃), (1) is reported. Complex 1 has been characterized by X-ray crystallography. 1 ismonoclinic, space group P2_1/n (No. 14), with cell dimensionsa = 13.398(4) , b=12.577(5) , c = 21.521(4) , =100.14(2) , V = 3570(2) ³ and Z = 4.     

Synthesis and reactivity of 1,2-bis(chlorodimethylgermyl)carborane and 1,2-bis(bromodimethylstannyl)carborane

The 1,2-bis(chlorogermyl)- (1) and 1,2-bis(bromostannyl)carborane (2) have been prepared by the reaction of dilithio-o-carborane with Me(2)GeCl(2) and Me(2)SnBr(2), respectively. Compounds 1 and 2 are found to be good precursors for the synthesis of a variety of cyclization compounds. The Wurtz-type coupling reaction of 1 and 2 using sodium metal afforded the four-membered digerma compound 3 and five-membered tristanna compound 4, respectively. The salt elimination reactions of 1 and 2 using Li(2)N(t)Bu and Li(2)PC(6)H(5) afforded the cyclic products [structure: see text]. The 1,2-bis(dimethylgermyl)carborane 9 and 1,2-bis(dimethylstannyl)carborane 10 were prepared by the reaction of 1 and 2 with sodium cyanoborohydride. The reactions of 9 and 10 with Pd(PPh(3))(4) afforded the bis(germyl)palladium 12 and bis(stannyl)palladium 13 complexes, respectively.     

Mixed-metal tellurites: synthesis, structure, and characterization of Na1.4Nb3Te4.9O18 and NaNb3Te4O16

Two new mixed-metal tellurites, Na1.4Nb3Te4.9O18 and NaNb3Te4O16, have been synthesized by standard solid-state techniques using Na2CO3, Nb2O5, and TeO2 as reagents. The structures of Na1.4Nb3Te4.9O18 and NaNb3Te4O16 were determined by single-crystal X-ray diffraction. Both of the materials exhibit three-dimensional structures composed of NbO6 octahedra, TeO4, and TeO3 polyhedra. The Nb5+ and Te4+ cations are in asymmetric coordination environments attributable to second-order Jahn-Teller (SOJT) effects. The Nb5+ cations undergo an intraoctahedral distortion toward a corner (local C4 direction), whereas the Te4+ cations are in distorted environments owing to their nonbonded electron pair. Infrared and Raman spectroscopy, UV-vis diffuse reflectance spectroscopy, thermogravimetric analysis, and dielectric measurements were also performed on the reported materials. Crystal data: Na1.4Nb3Te4.9O18, monoclinic, space group C2/m (No. 12), with a = 32.377(5) A, b = 7.4541(11) A, c = 6.5649(9) A, beta = 95.636(5) degrees, V = 1576.7(4) A3, and Z = 4; NaNb3Te4O16, monoclinic, space group P2(1)/m (No. 11), with a = 6.6126(13) A, b = 7.4738(15) A, c = 14.034(3) A, beta = 102.98(3) degrees, V = 675.9(3) A3, and Z = 2.     

Cancer cells undergoing epigenetic transition show short-term resistance and are transformed into cells with medium-term resistance by drug treatment

To elucidate the epigenetic mechanisms of drug resistance, epigenetically reprogrammed H460 cancer cells (R-H460) were established by the transient introduction of reprogramming factors. Then, the R-H460 cells were induced to differentiate by the withdrawal of stem cell media for various durations, which resulted in differentiated R-H460 cells (dR-H460). Notably, dR-H460 cells differentiated for 13 days (13dR-H460 cells) formed a significantly greater number of colonies showing drug resistance to both cisplatin and paclitaxel, whereas the dR-H460 cells differentiated for 40 days (40dR-H460 cells) lost drug resistance; this suggests that 13dR-cancer cells present short-term resistance (less than a month). Similarly, increased drug resistance to both cisplatin and paclitaxel was observed in another R-cancer cell model prepared from N87 cells. The resistant phenotype of the cisplatin-resistant (CR) colonies obtained through cisplatin treatment was maintained for 2–3 months after drug treatment, suggesting that drug treatment transforms cells with short-term resistance into cells with medium-term resistance. In single-cell analyses, heterogeneity was not found to increase in 13dR-H460 cells, suggesting that cancer cells with short-term resistance, rather than heterogeneous cells, may confer epigenetically driven drug resistance in our reprogrammed cancer model. The epigenetically driven short-term and medium-term drug resistance mechanisms could provide new cancer-fighting strategies involving the control of cancer cells during epigenetic transition.Subject terms: Tumour heterogeneity, Epigenetics