结构设计中的混沌优化方法及其改进

在变尺度混沌优化方法研究中．结合结构优化问题的特点,提出了一种改进的混沌优化求解算法,用来解决带有多种约束条件的结构优化设计问题。在有限元分析和优化设计软件JEFIX中实现了上述算法．并通过数值算例讨论了变尺度混沌优化方法在结构优化中的可行性及存在的问题,得到了一些重要结论。     

La_2O_3和WSi_2增强MoSi_2基复合材料的摩擦磨损性能研究

选用MRH-5A型环-块摩擦磨损试验机测定了3种载荷和2种转速条件下La2O3和WSi2增强MoSi2基复合材料在滑动干摩擦时的摩擦磨损性能,采用扫描电子显微镜分析了复合材料磨损表面形貌.结果表明:La2O3和WSi2增强MoSi2基复合材料的抗磨性能优于MoSi2及WSi2/MoSi2材料;当载荷与速度乘积(pv)值小于183.04N·m/s时,La2O3和WSi2增强MoSi2基复合材料的磨损质量损失仅为相同条件下MoSi2的1/4～1/6和WSi2/MoSi2的1/2;这是由于La2O3和WSi2复合增强相存在硬化和韧化协同作用所致;随着pv值增加,La2O3和WSi2增强MoSi2基复合材料依次呈现犁削、粘着磨损和疲劳磨损特征.     

狭窄流道中Fahraeus效应研究进展

本文详细论述了毛细管和二维狭缝中流过血液时的Fahraeus效应研究历史及现状,给出了迄今为止得到的全部结论,并报道了笔者对狭缝缝隙中Fahraeus效应研究的最新进展。本文所涉及的内容对于微循环的理论与应用以至有关流变学仪器的设计优化都有重要意义。     

在线振动监测与故障诊断的一种新途径

文中由应力强度因子导出含裂纹单元的刚度矩阵,从而提出了一种有限元法.将该法用于单边裂纹悬臂梁,计算了应变响应.用时域法识别了模态参数,并考虑了裂纹闭合的影响.分析了应变响应对故障的敏感度,计算结果表明,应变响应相对于位移响应而言,对故障更敏感.本文还提出了一种判别函数,该函数对于损伤检测,比现有几种判别函数更有效.最后,给出了一种在线振动监测与故障诊断新方法.     

复杂结构优化选型的计算方法

本文为复杂结构优化选型提供了一个比较实用的计算方法:根据原有结构型式和设计经验来建立优化选型计算模型;对目标函数和约束条件作数学上近似处理后,利用Kuhn-Tucker条件和Lagrange乘子,把选型问题转化为求解典型二次规划问题;引进加权因子和利用改进后的变尺度法使计算过程简化、可靠,而且精度较高.     

纤维复合材料透射式光弹性方法中的偏振光学问题

本文总结了用显微激光分析仪对一般纤维增强复合材料进行透射式光弹性研究的近期工作。针对纤维复合材料违反传统光弹理论的偏振光学行为,讨论了纤维、基体的双折射率不同以及由纤维与基体的界面两侧出射的光在Airy斑重叠区发生干涉等问题,从更一般的角度探讨了最近的文章中所提出的新光弹公式中所含两个滞后量的存在性。      

现代力学中的现代数学方法

本文简要介绍了力学与数学再次结合趋势的历史背景和现状。根据当代科学技术向力学提出的问题,简要综述了现代力学所涉及的现代数学领域和方法.     

材料的动态损伤和失效

本文对动载荷下材料内部损伤演化过程的研究进行了较为全面、系统的介绍和总结,并对现有的各种动态损伤模型(包括笔者所提出的模型)进行了必要的比较、讨论和评述。     

Effect of static bed height in the upper fluidized bed on flow behavior in the lower riser section of a coupled reactor

To study olefin reduction by using an auxiliary reactor for FCC naphtha upgrading, a large-scale cold model of a riser-bed coupled to an upper fluidized bed was established. The effect of static bed height in the upper fluidized bed on particle flow behavior in the lower riser was investigated experimentally. A restriction index of solids holdup was used to evaluate quantitatively the restrictive effect of the upper fluidized bed. Experimental results show that, under the restrictive effect of the upper fluidized bed, the riser could be divided into three regions in the longitudinal direction: accelerating, fully developed and restriction. The axial distribution of solids holdup in the riser is characterized by large solids holdup in the top and bottom sections and small solids holdup in the middle section. Overall solids holdup increased with increasing static bed height in the upper fluidized bed, while particle velocity decreased. Such restrictive effect of the upper fluidized bed could extend from the middle and top sections to the whole riser volume when riser outlet resistance is increased, which increases with increasing static bed height in the upper fluidized bed. The upper bed exerts the strongest restriction on the area close to the riser outlet.     

Hygroscopic growth of aerosol scattering coefficient:A comparative analysis between urban and suburban sites at winter in Beijing

A humidity controlled inlet system was developed to measure the hygroscopic growth of aerosol scattering coefficient in conjunction with nephelometry at an urban site of Chinese Academy of Meteorological Sciences (CAMS) in Beijing and a rural site at Shangdianzi Regional Background Air Pollution Monitoring Station (SDZ) outside Beijing during winter, from December 2005 to January 2006. Measurements were carried out at a wavelength of 525 nm with an Ecotech M9003 nephelometer. The hygroscopic growth function (or factor) of the aerosol scattering coefficientf(RH) increased continuously with increasing relative humidity (RH) and showed no obvious "step-like" deliquescent behavior at both sites during the experiment. The average growth factorf(RH) at the SDZ site could reach 1.5 when RH increased from less than 40% to 92%, and to 2.1 at the CAMS site when RH increased from less than 40% to 93%. The average hygroscopic growth factor at a relative humidity of 80%, f(RH=80±1%), was found to be about 1.26±0.15 at CAMS and 1.24±0.11 at SDZ. Further analysis indicated that under relatively polluted conditions, the average hygroscopic growth factor was higher at the CAMS site than that at the SDZ site. However, under relatively clean air conditions, the difference between the two sites was small, showing a hygroscopic growth behavior similar to those of burning biomass or blowing dust. These results reflected the different characteristics of aerosol types at the two sites.