Pullback attractors for a non-autonomous incompressible non-Newtonian fluid

This paper studies the pullback asymptotic behavior of solutions for a non-autonomous incompressible non-Newtonian fluid in two-dimensional (2D) bounded domains. We first prove the existence of pullback attractors AV in space V (has H²-regularity, see notation in Section 2) and AH in space H (has L²-regularity) for the cocycle corresponding to the solutions of the fluid. Then we verify the regularity of the pullback attractors by showing AV=AH, which implies the pullback asymptotic smoothing effect of the fluid in the sense that the solutions become eventually more regular than the initial data.     

Bi3+和Eu3+在Ca2SiO4中的发光和能量传递

用高温固态反应合成了Ca2SiO4:Bi3+,Ca2SiO4:Eu3+和Ca2SiO4:Eu3+,Bi3+发光体。讨论了不同掺杂量和掺杂种类时Bi3+对Eu3+的5D0-7F1,5D0-7F2发射的影响规律。实验发现,Ca2SiO4:Bi3+在紫外线激发下发出明亮的蓝色光,Ca2SiO4:Eu3+,Bi3+中的Bi3+能将激发能传递给Eu3+,使Eu3+的5D0-7F1和5D0-7F2两种跃迁都大大加强,同时,Bi3+也发出鲜艳的紫色光。     

聚丙烯微孔膜的等离子体接枝聚合改性

利用拉伸时的晶型转变致孔特性,从β晶相聚丙烯经单向或双向拉伸制得了新型聚丙烯微孔膜、用等离子体接枝聚合技术接上了亲水性聚合物如聚丙烯酸、聚丙烯腈等。研究了等离子体处理时间、单体性质对得到的亲水膜的亲水性、离子/溶质渗透性的影响。发现接枝聚丙烯酸的双向拉伸膜对Na~+、Mg~(++),尿素有较大的渗透性,并具有优良的形状稳定性。     

取代基效应(SCS)与乙烯-α-烯烃共聚物的序列结构Ⅲ.定量分析

本文在分析乙烯-α-烯烃共聚物序列结构时,把代表共单体反接单元的亚甲基(CH₂)βγ和γδ分别归属给了二元组VV和三元组EEV。与此同时,CH₂-δδ和δδ⁺归属给了二元组EE。表征乙烯长序列的CH₂-δ⁺δ⁺分属二元组EE和三元组EEE,对应峰强度在EE和EEE之间的分配是处理序列分布的关键。在本文中运用序列结构的Bovey关系和Randall统计进行演算,求得了修正值△的数学表达式,严格解和近似解。在规则链条件下得到的近似解与G.J.Ray的结果完全相同。当共单体含量较少时,谱峰强度Iδ⁺δ⁺的分配接近相等。在二元组和三元组的水平上,乙烯-α-稀烃共聚物的¹³C NMR谱中共有十三个峰,属于CH₂的有十个,属于CH的有三个。利用这些谱峰的强度数据可以建立一套计算公式,由此提供共聚物序列结构的全部信息。因此这是一个研究乙烯-α-烯烃共聚物序列结构的普适方法。     

Ge_x Si_(1-x)/Si超晶格中纵声学声子的喇曼散射强度研究

本文用光弹理论,在全面考虑了超晶格中两种材料的声速,质量密度和光弹常数存在差别的基础上,计算了Ge_xSi_(1-x)/Si超晶格中折迭纵声学声子的喇曼散射强度,在高达50cm~(-1)的频率范围内,理论值和实验符合得很好。     

Low-energy ion-assisted control of interfacial structures in metallic multilayers

A molecular dynamics method has been used to simulate the argon ion-assisted deposition of Cu/Co/Cu multilayers and to explore ion beam assistance strategies that can be used during or after the growth of each layer to control interfacial structures. A low-argon ion energy of 5–10 eV was found to minimize a combination of interfacial roughness and interlayer mixing (alloying) during the ion-assisted deposition of multilayers. However, complete flattening with simultaneous ion assistance could not be achieved without some mixing between the layers when a constant ion energy approach was used. It was found that multilayers with lower interfacial roughness and intermixing could be grown either by modulating the ion energy during the growth of each metal layer or by utilizing ion assistance only after the completion of each layers deposition. In these latter approaches, relatively high-energy ions could be used since the interface is buried and less susceptible to intermixing. The interlayer mixing dependence upon the thickness of the over layer has been determined as a function of ion energy.     

Erratum: Preparation of size‐controlled In2O3 nanoparticles

The article referenced above was first published online on 7 August 2007 with incorrect pagination; the pagination has now been corrected online and in print. Copyright © 2007 John Wiley & Sons, Ltd.     

Frame Wavelets with Compact Supports for L^2（R^n）

The construction of frame wavelets with compact supports is a meaningful problem in wavelet analysis. In particular, it is a hard work to construct the frame wavelets with explicit analytic forms. For a given n × n real expansive matrix A, the frame-sets with respect to A are a family of sets in R^n. Based on the frame-sets, a class of high-dimensional frame wavelets with analytic forms are constructed, which can be non-bandlimited, or even compactly supported. As an application, the construction is illustrated by several examples, in which some new frame wavelets with compact supports are constructed. Moreover, since the main result of this paper is about general dilation matrices, in the examples we present a family of frame wavelets associated with some non-integer dilation matrices that is meaningful in computational geometry.     

Synthesis and nuclear magnetic resonance analysis of starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers

A new biodegradable starch graft copolymer, starch‐g‐poly(1,4‐dioxan‐2‐one), was synthesized through the ring‐opening graft polymerization of 1,4‐dioxan‐2‐one onto a starch backbone. The grafting reactions were conducted with various 1,4‐dioxan‐2‐one/starch feed ratios to obtain starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers with various poly(1,4‐dioxan‐2‐one) graft structures. The microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was characterized in detail with one‐ and two‐dimensional NMR spectroscopy. The effect of the feed composition on the resulting microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3417–3422, 2004     

Reply to the comment on: ‘Magnetoresistance in La1−xCaxMnO3(0≤x<0.4)’

The author of the comment objects to the characterization and the interpretation of magnetoresistance (MR) effects observed by us in La_1−xCa_xMnO₃ (0≤x<0.4) samples. In this reply, arguments are used to show that the samples' characterization and explanation of the MR by considering the role of the short-charge ordering (CO) regions and magnetic domains are reasonable and acceptable.