Electron paramagnetic resonance study of partially oriented clay platelets intercalated with copper(II) 1,4,8,11-tetraazacyclotetradecane

Electron paramagnetic resonance (EPR) spectra of powder and oriented films of montmorillonite, hectorite, and saponite intercalated with [Cu(cyclam)](2+) (cyclam = 1,4,8,11-tetraazacyclotetradecane) exhibit three components: an orientation-dependent component without hyperfine features, an orientation-dependent component with hyperfine features, and an orientation-independent component without hyperfine feature. EPR spectra of [Cu(cyclam)](2+)-saponite, which exhibit only two components and the best resolved hyperfine features, were simulated. The spectra indicate that a large portion of the saponite platelets are inclined to the glass surface, although they tend to align with their basal planes parallel to the glass surface. The orientation-dependent spectra could be simulated by introducing a Gaussian distribution with a standard deviation of 20 degrees for the inclination angle. The standard deviation may be used as a disorder parameter for the microcrystals assembled on glass plates. Spectral simulation also shows that the CuN(4) plane of [Cu(cyclam)](2+) is parallel to the clay layers. EPR spectra of some other partially oriented systems are also discussed.     

Complete 1H and 13C NMR spectral assignment of symmetric and asymmetric bis-spiropyran derivatives

(1)H and (13)C NMR spectra of symmetric and asymmetric bis-spiropyrans, Series 1-3, were completely assigned. Especially, the (1)H assignment of asymmetric spiropyrans was achieved by utilizing (1)H-(1)H COSY and nOe experiments. All of the carbons in the dye molecules were investigated through a combination of heteronuclear 2D-shift correlation spectroscopy (HETCOR), together with an attached proton test (APT).     

A novel in-plane passive microfluidic mixer with modified Tesla structures

An innovative in-plane passive micromixer using modified Tesla structures, which are used as passive valves, has been designed, simulated, fabricated and successfully characterized in this paper. Simulation and experimental results of the developed novel micromixer have shown excellent mixing performance over a wide range of flow conditions in the micro scale. The micromixer realized in this work has achieved even better mixing performance at a higher flow rate, and its pressure drop is less than 10 KPa at the flow rate of 100 microl min(-1). This micromixer shows characteristics similar to Taylor dispersion, with contributions from both diffusion and convection. The mixer has a diffusion domain region at low flow rate, but it moves to a convection domain region at high flow rate. Due to the simple in-plane structure of the novel micromixer explored in this work, the mixer can be easily realized and integrated with on-chip microfluidic devices and micro total analysis systems (micro-TAS).     

Highly charging of nanoparticles through electrospray of nanoparticle suspension

Patterned deposition of nanoparticles is a prerequisite for the application of unique properties of nanoparticles in future nanodevices. Recent development of nanoxerography requires highly charged aerosol nanoparticles to avoid noise deposition due to random Brownian motion. However, it has been known that it is difficult to charge aerosol nanoparticles with more than two elementary charges. The goal of this work is to develop a simple technique for obtaining highly charged monodisperse aerosol nanoparticles by means of electrospray of colloidal suspension. Highly charged aerosol nanoparticles were produced by electrospraying (ES) and drying colloidal suspensions of monodisperse gold nanoparticles. Size and charge distributions of the resultant particles were measured. We demonstrate that this method successfully charges monodisperse nanoparticles very highly, e.g., 122 elementary charges for 25.0 nm, 23.5 for 10.5 nm, and 4.6 for 4.2 nm. The method described here constitutes a convenient, reliable, and continuous tool for preparing highly charged aerosol nanoparticles from suspensions of nanoparticles produced by either wet chemistry or gas-phase methods.     

Direct determination of estriol 3- and 16-glucuronides in pregnancy urine by column-switching liquid chromatography with electrospray tandem mass spectrometry

Using column-switching liquid chromatography/tandem mass spectrometry (LC-MS/MS), we developed an improved analytical method of urinary estriol glucuronides. This new method is derived predominantly from maternal and fetal precursors in pregnancy. We used in the following procedure: first, we filtered urine samples with a membrane filter. Next, we directly injected the 50 microL aliquot of urine samples onto a pre-column. Then, after activating the column-switching valve, we backflushed the loaded samples onto the C(18) analytical column. Urine samples can be assayed within 20 min without any sample preparation steps. We monitored separated estriol glucuronides by negative electrospray ionization (ESI) and selected-reaction monitoring (SRM). The calibration range of estriol-3-glucuronide (E3-3G) and estriol-16-glucuronide (E3-16G) was 0.1-20 microg/mL and the linearity of the method was 0.9984 for E3-3G and 0.9987 for E3-16G. The limits of detection at a signal-to-noise (S/N) ratio of 3 were 10 ng/mL (E3-3G) and 5 ng/mL (E3-16G). The analytical recovery was over 85% and, in general, inter-day and intra-day variability for precision and accuracy were less than 10%. When applied to a pregnancy urine sample to biomedical monitoring of the function of the maternal/fetal unit, the proposed method allowed rapid and sensitive screening for the detection of E3-3G and E3-16G.     

Highly stereoselective synthesis of 2,5-disubstituted 3-vinylidene tetetrahydrofurans via Prins-type cyclization

[reaction: see text]. A novel synthetic methodology for 2,5-disubstituted tetrahydrofurans having an allenyl group at the 3-position via Prins-type cyclization was developed. The reaction led to excellent selectivity and moderate to high yields.     

Quantitative analysis of bilobalide and ginkgolides from Ginkgo biloba leaves and Ginkgo products using (1)H-NMR

1H-NMR spectrometry was applied to the quantitative analysis of the bilobalide, ginkgolides A, B, and C in Ginkgo biloba leaves and six kinds of commercial Ginkgo products without any chromatographic purification. The experiment was performed by the analysis of each singlet H-12, which were well separated in the range of delta 6.0-7.0 in the (1)H-NMR spectrum. However, the H-12 protons of bilobalide and ginkgolides may have overlapped with H-6 or H-8 protons of the Ginkgo flavonoids. Therefore, the optimum (1)H-NMR solvent for the analysis of the compound was selected through the evaluation of solvent effects on the resolution of these signals from the compounds. Acetone-d(6)-benzene-d(6) (50 : 50) was found to be the best one among the solvents evaluated. The quantity of the compounds was calculated by the relative ratio of the intensity of each compound to the known amount of internal standard (25 microgram), phloroglucinol. This method allows rapid and simple quantitation of underivatized bilobalide and ginkgolides in 5 min without any pre-purification steps.     

State-to-state reaction dynamics of CH3I photodissociation at 304 nm

The detailed reaction dynamics of CH(3)I photodissociation at 304 nm were studied by using high-resolution long time-delayed core-sampling photofragment translation spectroscopy. The vibrational state distributions of the photofragment, i.e., CH(3), are directly resolved due to the high kinetic resolution of this experiment for the first time. CH(3) radicals produced from I((3)Q(0+)), I((1)Q(1) <--( 3)Q(0+)), and I((3)Q(1)) channels are populated in different vibrational state distributions. The I((3)Q(0+)) and I((3)Q(1)) channels show only progressions in the nu2'(a2") umbrella bending mode, and the I((1)Q(1) <-- (3)Q(0+)) channel shows both progression in the nu2' umbrella bending mode and a small amount of excitation in the nu1'(a1') C-H stretching mode. The photodissociation processes from the vibrational hot band of CH(3)I (upsilon3 = 1, upsilon3 = 2) were also detected, primarily because of the absorption probability from the vibrational excited states, i.e., hot bands are relatively enhanced. Photofragments from the hot bands of CH(3)I show a cold vibrational distribution compared to that from the vibrational ground state of CH(3)I. The I* quantum yield and the curve crossing possibility were also studied for the ground vibrational state of CH(3)I. The potential energy at the curve crossing point was calculated to be 32 790 cm(-1) by using the one-dimensional Landau-Zener model.     

Synthesis and crystal structures of novel calix[4]azacrowns

A series of novel 1,3‐altemate calix[4]arene azacrowns having mono and bis crown ethers on the lower rim of the calix[4]arene framework were synthesized. Solid‐state structures confirmed the three dimensional conformation of compounds 1–3.     

Investigation of efflorescence of inorganic aerosols using fluorescence spectroscopy

The phase transition is one of the most fundamental phenomena affecting the physical and chemical properties of atmospheric aerosols. Efflorescence, in particular, is not well understood, partly because the molecular interactions between the solute and water molecules of saturated or supersaturated solution droplets have not been well characterized. Recently, we developed a technique that combines the use of an electrodynamic balance and a fluorescence dye, 8-hydroxyl-1,3,6-pyrenetrisulfonate (pyranine), to study the distributions of solvated and free water in aqueous droplets (Choi, M. Y.; Chan, C. K.; Zhang, Y. H. J. Phys. Chem. A 2004, 108, 1133). We found that the equality of the amounts of solvated and free water is a necessary but not sufficient condition for efflorescence. For efflorescing compounds such as Na2SO4, (NH4)2SO4, and a mixture of NaCl and Na2SO4, the amount of free water decreases, while that of solvated water is roughly constant in bulk measurements and decreases less dramatically than that of free water in single-particle measurements as the relative humidity (RH) decreases. Efflorescence of the supersaturated droplets of these solutions occurs when the amounts of free and solvated water are equal, which is consistent with our previous observation for NaCl. For nonefflorescing compounds in single-particle levitation experiments such as MgSO4 and Mg(NO3)2, the amounts of free and solvated water are equal at a water-to-solute molar ratio of about 6, at which spectral changes due to the formation of contact ion pairs between magnesium and the anions occur as shown by Raman spectroscopy. Fluorescence imaging shows that the droplets of diluted Mg(NO3)2 (at 80% RH) and MgSO4 are homogeneous but those of NaCl, Na2SO4, (NH4)2SO4, and supersaturated Mg(NO3)2 (at 10% RH) are heterogeneous in terms of the solvated-to-free water distribution. The solvated-to-free water ratios in NaCl, Na2SO4, and (NH4)2SO4 droplets are higher in the outer regions by about half a radius deep than at the center of the droplets.