故障树模块化在装甲车辆灭火系统故障诊断中的应用

为了实现装甲装备灭火系统故障的快速诊断,提出了一种故障树模块化分析方法;对灭火系统故障树进行深度优先最左遍历,并记录遍历过程,按照遍历顺序对故障树中的每个事件进行标定,并将灭火系统故障树划分为相互独立的模块,依据划分的模块可以通过故障现象对模块内的故障进行排查及修复;实验结果分析表明,该方法可以快速修复模块故障,恢复系统功能,简化了以往对灭火系统所有子事件遍历查错的繁琐过程。该方法同样可以计算故障模块的失效概率,并可以实现故障模块的整体更换,恢复系统性能;证明了故障树模块化方法在灭火系统故障诊断中具有较高的效率,简化了灭火系统诊断流程,在装甲车辆其他系统故障诊断中具有借鉴作用,符合现代作战对于装备保障的需求。     

双折射调谐器设计的等色图原理

提出双折射调谐器设计的等色图方法，给出原理。分析表明当晶片光轴处在以折射光线为轴线、顶角为４５°的圆锥面上时，双折射调谐器具有最快的波长调谐速率；当光轴位于过折射光线并与入射面成４５°或１３５°的平面内时，调谐器抑制非所需波长的能力最强。由此给出光轴相对晶片表面的两个优化取向，对石英晶片它们分别为１８．７１２°和５９．９２２°。文中还给出了三块晶片组合的调谐器的设计例子，对其调谐特性进行了简要的讨论。     

碳纳米管包裹的硅纳米线复合结构的热稳定性研究

采用经典分子动力学方法模拟一定直径[111]晶向的硅纳米线填充不同扶手椅型单壁碳纳米管复合结构的加热过程, 通过可视化和能量分析的方法判断复合结构中硅纳米线和碳纳米管的热稳定性. 通过讨论碳纳米管的空间限制作用和分子间相互作用力的关系, 对碳纳米管和硅纳米线的热稳定性变化进行初步解释. 研究发现碳纳米管中硅纳米线的热稳定性和碳纳米管的直径关系密切: 当管径较小时, 硅纳米线的热稳定性有所提高, 当管径增大到一定大小时, 硅纳米线的热稳定性会突然显著地下降, 直到硅纳米线与管壁不存在分子间相互作用力, 硅纳米线的热稳定性才会恢复. 而硅纳米线填充到碳纳米管中对碳纳米管的热稳定性有着明显的降低作用.     

Construction and cosmic-ray test of the new inner drift chamber for BESIII

A new inner drift chamber has been built which can replace the aged part of the BESIII drift chamber when needed. The design of the new inner drift chamber can minimize the ineffective area in the very forward and backward region and hence reduce the background event rate. With this design, the new inner drift chamber is expected to have a longer lifetime and improved performance due to the lower occupancy. The endplates and the cylinder were machined with high precision. Wire stringing was performed after the mechanical structure was assembled, and good quality of wire stringing was ensured by measurement of the tension and leakage current of the wires. After completion of the physical construction of the new chamber, a cosmic-ray test was carried out to test its performance. The results of the cosmic-ray test show that the new inner chamber achieves a spatial resolution of127 μm and a d E/dx resolution of 6.4%, which satisfies the design specifications.     

NⅡ离子2p4f—2p3d辐射跃迁概率的理论研究

在全相对论理论框架下，利用多组态Dirac-Fock(MCDF)方法，系统计算了NⅡ离子2p4f—2p3d的辐射跃迁概率，得到的结果与已有实验值符合很好.具体计算中，详细分析了相对论效应、电子关联、弛豫效应、Breit相互作用和量子电动力学(QED)效应对能级精细结构及辐射跃迁概率的影响.结果表明：相对论效应、电子关联和弛豫效应对NⅡ 2p4f-2p3d辐射跃迁概率有很重要的影响,考虑了这些效应后计算值得到明显改善.     

New side-pump scheme for large mode area fiber lasers by wrapping polished fibers conjugate caustic removed

With the purpose of uniform gain coefficient along the axial direction in the core of gain guided and index anti-guided fiber, a new kind of side-pump scheme by wrapping particularly treated fibers around the central GGIAG fiber is reported in this paper. According to leakage mode analysis on wrapped fiber and numerical simulation on this pumping structure having ytterbium doped central fiber and conventional wrapped side fiber, we find this kind of pump scheme can improve the uniformity of gain coefficient along the fiber direction, and also, it can support multi channels of pumping sources by adding more side fibers to improve the total effective incident pumping power.     

三效吸收式制冷循环系统性能分析

对12个通用的三效循环系统以及这12个通用循环系统组成的76种可能的密闭循环系统进行了评测。根据通用三效循环系统的压力和溶解度要求,对通用三效循环系统进行了分析,并充分考虑各部件设计中的问题和COPs数值,以及处于高腐蚀环境中部件的数目。通过分析,确定了四个性价比较优的系统:Alkitrate Topping循环系统,Pressure Staged Envelope循环系统,High Overlap循环系统和Dual Loop循环系统。     

热声系统中回热器特征阻抗与传播常数的研究

针对本实验室一台声驱动热声系统,采用传递函数法研究声驱动系统中回热器的特征阻抗和传播常数.通过调节谐振管长度,改变回热器表面的阻抗,从理论上分析了回热器网络传输方程中的声传播常数、特征阻抗与系统网络元件中的阻抗、导纳和流的关系.并且进一步讨论有无换热器以及不同的加热功率对回热器网络参数的影响.结论有利于进一步量化回热器的网络参数.     

链间耦合对聚合物中双激子态反向极化的影响

从紧束缚模型出发，研究了链间相互作用对双激子态反向极化的影响.结果发现：加链间耦合后，双激子态仍主要局域在一条链中.当简并破缺较小时，反向极化程度随耦合强度的增加大幅提高；当简并破缺较大时，反向极化程度随耦合强度的增加基本不变. 关键词： 反向极化 双激子态 链间耦合     

Measurements of NO2 mixing ratios with topographic target light scattering-differential optical absorption spectroscopy system and comparisons to point monitoring technique

A topographic target light scattering-differential optical absorption spectroscopy(ToTaL-DOAS) system is developed for measuring average concentrations along a known optical path and studying surface-near distributions of atmospheric trace gases.The telescope of the ToTaL-DOAS system points to targets which are located at known distances from the measurement device and illuminated by sunlight.Average concentrations with high spatial resolution can be retrieved by receiving sunlight reflected from the targets.A filed measurement of NO2 concentration is performed with the ToTaL-DOAS system in Shijiazhuang in the autumn of 2011.The measurement data are compared with concentrations measured by the point monitoring technique at the same site.The results show that the ToTaL-DOAS system is sensitive to the variation of NO2 concentrations along the optical path.