人γ晶体蛋白的一级结构测定 1.γ晶体蛋白的分离提纯及其顺序测定方法(GC/MS法)的研究

成功地从人眼晶体中分离出单纯组分的γ晶体蛋白,对γ晶体蛋白的纯度、相对分子质量、氨基酸组成、N末端氨基酸组成等进行了测定,利用酸水解法和酶解法对γ晶体蛋白进行了水解和酶解条件的摸索、找出了使γ晶体蛋白断裂成适合于GC/MS联用仪进行结构测定的肽段的裂解条件。对进行氨基酸顺序测定的GC/MS法化学衍生化条件作了一系列的摸索,找出了化学衍生化的合适条件。对衍生化过程中的一些影响因素也进行了探讨。     

Selective effect of guest molecule length and hydrogen bonding on the supramolecular host structure

A host supramolecular structure consisting of bis-(2,2':6',2' '-terpyridine)-4'-oxyhexadecane (BT-O-C16) is shown to respond to guest molecules in dramatic ways, as observed by using scanning tunneling microscopy (STM) on a highly oriented pyrolytic graphite surface under ambient conditions. It is observed that small linear molecules can be encapsulated within the host supramolecular lattice. The characteristics of the host structure were nearly unaffected by the encapsulated guest molecules of terphthalic acid (TPA) dimers, whereas appreciable changes in cavity dimension can be observed with azobenzene-4,4'-dicarboxylic acid. The STM study and density functional theory (DFT) analysis reveal that intermolecular hydrogen bonding interaction plays an essential role in forming the assembling structures. The difference in guest molecule length is considered the important cause for the different guest-host complexes.     

110K铋基超导相形成的组成条件

Bi-Sr-Ca-Cu-O超导材料中存在110K和80K2个超导相。其组成是Bi_2Sr_2Ca_2Cu_3O_y和Bi_2Sr_2CaCu_2O。但迄今为止,在按2223组成比合成的未掺杂Bi系超导材料中从未得到过纯的110K相,也未见过组成为2223,零电阻温度在100K以上材料的报道。为了探索形成110K相的最佳条件,本文以2223组成比为参考,合成了5个系列材料:Bi_xSr_2Ca_2Cu_3O_y,Bi_2Sr_xCa_2Cu_3O_y,Bi_2Sr_2Ca_xCu_3O_y,Bi_2Sr_2Ca_2Cu_xO_y,Bi_i Sr_uCa_yCu_wO_s。     

静电和疏水效应对TGEV主蛋白酶二聚体稳定性的影响

从TGEV 3CL蛋白酶二聚体结构出发,研究了TGEV 3CL蛋白酶二聚体单体之间的静电和疏水相互作用.蛋白质的静电相互作用通过有限差分方法求解Poisson-Boltzmann方程得到,疏水相互作用通过分析溶剂可及性表面模型得到.考察了不同pH值对TGEV 3CL蛋白酶二聚体静电和疏水相互作用的影响,在pH值为5.5～8.5时,二聚体静电相互作用能、静电去溶剂化能和疏水自由能都较小,表明在该条件下静电和疏水相互作用有利于二聚体的稳定存在,这符合实验结晶所需条件.pH值对静电去溶剂化能的影响大于疏水自由能,表明静电作用是造成强酸或强碱条件下二聚体不能稳定存在的主要原因.     

从氨性柠檬酸溶液中电沉积Ni-Mo的机理研究

含钼大于约27％（质量分数）Ni－Mo合金，具有较高的耐蚀性，特别是在盐酸和硫酸溶液中，其耐蚀性优于SUS304不锈钢［1］．因此，人们对该种合金的电沉积进行了广泛的研究［1－4］．对合金共沉积机理也作了一定的研究．一般认为，钼不能单独进行电沉积，但它可以同铁族元素共沉积［5］．对钼与铁族元素的共沉积机理，人们已提出了几种假设．一般认为［3］，钼可能是多步还原，即六价钼首先被电化学还原成低价钼化合物，而后由吸附在诱导金属（铁族元素）上的原子氢进一步还原成合金中的零价钼，为了进一步弄清Ni－Mo合金的共沉积机理，本…     

Processing and error analysis of signals in flow-injection analysis

The processing and error analysis of signals in flow-injection systems were systematically studied by simulation and experimental measurements. The content includes an error analysis for peak-height and peak-area signal, a least-squares filtering procedure applied to the flow-injection curve and a peak recognition to remove interferences from air bubbles. Simulation results were obtained by statistical processing of peak-height and peak-area values from Gaussian curves to which noise had been added. The experimental measurements were done by an automatic flow-injection device to obtain detailed information for each individual point of a peak. 2-(2-Arsenophenylazo)-7-(2,6-dichlorophenylazo-4-sulphonic acid)-1,8-dihydroxynaphthalene-3,6-disulphonic acid (DCSA) was used for measuring physical dispersion alone, and Fe(II)-o-phenanthroline for the measurement of both physical dispersion and chemical reaction. The results from computer simulation and experiments agreed well.     

Synthesis and characterization of block copolymers from 2‐vinylnaphthalene by anionic polymerization

The anionic polymerization of 2‐vinylnaphthalene (2VN) has been studied in tetrahydrofuran (THF) at ?78 °C and in toluene at 40 °C. 2VN polymerization in THF, toluene, or toluene/THF (99:1 v/v) initiated by sec‐butyllithium (sBuLi) indicates living characteristics, affording polymers with predefined molecular weights and narrow molecular weight distributions. Block copolymers of 2VN with methyl methacrylate (MMA) and tert‐butyl acrylate (tBA) have been synthesized successfully by sequential monomer addition in THF at ?78 °C initiated by an adduct of sBuLi–LiCl. The crossover propagation from poly(2‐vinylnaphthyllithium) (P2VN) macroanions to MMA and tBA appears to be living, the molecular weight and composition can be predicted, and the molecular weight distribution of the resulting block copolymer is narrow (weight‐average molecular/number‐average molecular weight < 1.3). Block copolymers with different chain lengths for the P2VN segment can easily be prepared by variations in the monomer ratios. The block copolymerization of 2VN with hexamethylcyclotrisiloxane also results in a block copolymer of P2VN and poly(dimethylsiloxane) (PDMS) contaminated with a significant amount of homo‐PDMS. Poly(2VN‐b‐nBA) (where nBA is n‐butyl acrylate) has also been prepared by the transesterification reaction of the poly(2VN‐b‐tBA) block copolymer. Size exclusion chromatography, Fourier transform infrared, and ¹H NMR measurements indicate that the resulting polymers have the required architecture. The corresponding amphiphilic block copolymer of poly(2VN‐b‐AA) (where AA is acrylic acid) has been synthesized by acidic hydrolysis of the ester group of tert‐butyl from the poly(2VN‐b‐tBA) copolymer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4387–4397, 2002     

Characterization of phosphopeptides from protein digests using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and nanoelectrospray quadrupole time-of-flight mass spectrometry

A two-step mass spectrometric method for characterization of phosphopeptides from peptide mixtures is presented. In the first step, phosphopeptide candidates were identified by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) based on their higher relative intensities in negative ion MALDI spectra than in positive ion MALDI spectra. The detection limit for this step was found to be 18 femtomoles or lower in the case of unfractionated in-solution digests of a model phosphoprotein, beta-casein. In the second step, nanoelectrospray tandem mass (nES-MS/MS) spectra of doubly or triply charged precursor ions of these candidate phosphopeptides were obtained using a quadrupole time-of-flight (Q-TOF) mass spectrometer. This step provided information about the phosphorylated residues, and ruled out nonphosphorylated candidates, for these peptides. After [(32)P] labeling and reverse-phase high-performance liquid chromatography (RP-HPLC) to simplify the mixtures and to monitor the efficiency of phosphopeptide identification, we used this method to identify multiple autophosphorylation sites on the PKR-like endoplasmic reticulum kinase (PERK), a recently discovered mammalian stress-response protein.     

Gas-phase spectroscopy of the unstable sulfur diisocyanate molecule S(NCO)2.

Sulfur diisocyanate is generated from a heterogeneous reaction of gaseous sulfur dichloride with silver cyanate and studied for the first time in the gas phase. Combined with quantum chemical calculations, the electronic structure is characterized by photoelectron spectroscopy (PES). Simultaneously, an investigation of the possible ionization and dissociation processes for the molecular cation is presented based on experimental soft ionization mass spectrometry. From the calculated bond-dissociation energies, the dissociation pathway is determined. S(NCO)2+ undergoes 1,3-sigmatropic rearrangement with a smaller barrier height (9.9 kcal mol(-1)) than the neutral counterpart. Thus, the 1,3-sigmatropic rearrangement is preferred for the molecular cation, and OCNCO+ and NS+ is produced by subsequent dissociation of the rearrangement product. The analysis agrees very well with the experimental mass spectrum.