罗布泊遥感影像"耳纹"特征分析及其环境意义

研究典型干旱区的罗布泊,对揭示区域环境演变特征和全球变化具有重要意义.从遥感影像上的"耳纹"特征入手,通过光谱、土壤和地表参数等分析,认为:地表全盐含量和结构差异是形成罗布泊遥感影像"耳纹"特征的直接原因;光谱、全盐含量和土壤粒径的分析结果具有很好的一致性."耳纹"记录下了罗布泊地区的环境演变特征,这些特征表明:受全球环境影响,湖水在气候不断干旱的过程中逐渐干涸,干涸过程的气候调整,使罗布泊地区经历了两次相对湿润的气候环境,前一次较长,后一次很短.     

Geometric and electronic structure of positively and negatively poled LiNbO3 (0 0 0 1) surfaces

The effect of ferroelectric poling direction on the structure and electronic properties of the LiNbO₃ (0 0 0 1) surface was characterized. Low energy and reflection high energy electron diffraction indicated that both the positively and negatively poled surfaces were (1 × 1) with no evidence of longer range periodic reconstructions. Low energy ion scattering spectra from both surfaces were dominated by scattering from oxygen atoms. X-ray and ultraviolet photoelectron spectra also showed little difference between the positively and negatively poled surfaces, with the exception of a high binding energy shoulder on the O 1s core level of the negative surface. Exposure of the surfaces to atomic hydrogen caused reduction of the surface Nb rather than an increase in intensity on the high binding energy side of the O 1s peak, indicating that the shoulder on the O 1s peak on the negative surface was not due to surface hydroxyl groups. Temperature programmed desorption measurements indicated that the nearly stoichiometric LiNbO₃ samples were susceptible to loss of Li₂O starting at temperatures as low as 500 K, independent of the poling direction. An adatom/vacancy model is proposed in which oxygen ad-anions accumulate on one side of the crystal while oxygen anion vacancies are created on the opposite surface. This model can explain the apparent oxygen termination of both surfaces and the observed (1 × 1) periodicity of the surfaces, and also effectively screens the thickness dependent electric field associated with the polar orientation of the crystal.     

Impact of organic contamination in vacuum on laser-induced damage threshold of TiO2/SiO2 dielectric mirrors

The influence of organic contamination in vacuum on the laser-induced damage threshold (LIDT) of coatings is studied. TiO2/SiO2 dielectric mirrors with high reflection at 1064 nm are deposited by the electronbeam evaporation method and their LIDTs are measured in vacuum and atmosphere, respectively.It is found that the contamination in vacuum is easily attracted to optical surfaces because of the low pressure and becomes the source of damage, O2 molecules in vacuum with contamination can accelerate the laser-induced damage by observing LIDT and damage morphologies. LIDTs of mirrors have a little change in vacuum compared with in atmosphere when the organic contamination is wiped off. The results indicate that organic contamination is a significant reason to decrease the LIDT in vacuum.     

高温超导微带线的传输特性和设计考虑

利用唯象损耗等效法和宏观唯象模型来分析高温超导微带传输线的传输特性。宏观唯象模型克服了传统二流体模型不适用于高温超导体的缺点,使计算结果符合测量值。本文给出了高温超导体YBCO微带传输线的传输特性计算结果,可见其衰减及色散都很小。因此结合唯像损耗等效法和宏观唯象模型可以使高温超导微带线的设计精度有很大提高。     

贮存条件对纤维素/大豆蛋白膜结构与性能的影响

通过流延成膜法制备一系列纤维素/大豆分离蛋白复合膜材料,分别以10%醋酸溶液、5%醋酸和5%乙醇的混合溶液、75%乙醇溶液等3种水溶液及蒸馏水为贮存体系,通过力学性能测试、扫描电镜观察、紫外测试等方法研究了不同贮存条件对纤维素/大豆分离蛋白复合膜结构与性能的影响.结果表明,10%醋酸水溶液贮存纤维素/大豆分离蛋白复合膜30d能够较好地维持其力学性能和微观结构,可作为该复合膜较为适合的贮存体系.     

H-DAY分子筛催化对甲氧基苯酚的叔丁基化反应

研究了H-ZSM-5、H-MCM-41和氢型脱铝Y分子筛(简称H-DAY)在对甲氧基苯酚和甲基叔丁基醚反应合成3-叔丁基羟基茴香醚中的催化性能.研究表明,催化性能主要和催化剂的酸量、酸强度以及孔大小有关.其中,H-DAY由于其相对较大的总酸量和可容纳产物分子的孔径,在所考察的分子筛中表现出最高的反应活性,因此进一步考察了H-DAY催化作用下反应时间、反应温度、催化剂用量和原料配比等反应条件对反应活性和选择性的影响以及催化剂的重复使用性能.     

基于均值置信区间带的高光谱特征波段选择与树种识别

以柏木、雷竹和无患子野外高光谱数据为基础,在统计学理论和实践分析的基础上,提出了利用均值置信区间带筛选树种间最佳特征区分波段及利用Manhattan距离和Min-Max区间相似度识别树种的问题。研究结果表明:(1)柏木与雷竹之间的最佳区分波段为358～386,452～1 145和1 314～2 500 nm,柏木与无患子之间的最佳区分波段为350～446,497～527,553～1 330,1 355～2 400和2 436～2 500 nm,雷竹与无患子之间的最佳区分波段为434～555,580～1 903,1 914～2 089,2 172～2 457和2 475～2 500 nm;(2)在最佳区分波段内,同种树种间的Manhattan距离远小于异种树种间的Manhattan距离,同种树种间的Min～Max区间相似度远大于异种树种间的Min～Max区间相似度,Manhattan距离和Min～Max区间相似度可以有效区分和识别不同类型的树种。     

Electrospinning fabrication and oxygen sensing properties of Cu(I) complex-polystyrene composite microfibrous membranes

In this paper, a phosphorescent Cu(I) complex of [Cu(POP)(ECI-Phen)]BF₄, where POP=bis[2-(diphenylphosphino)phenyl]ether, and ECI-Phen=1-ethyl-2-(N-ethyl-carbazole-yl-4-)imidazo[4,5-f]1,10-phenanthroline, is incorporated into a polystyrene matrix of polystyrene (PS) to form microfibers membranes. The possibility of using the resulted composite microfibrous membranes as an optical oxygen sensor is explored. Good linearity and short response time are obtained with a sensitivity of 9.8. These results suggest that phosphorescent [Cu(POP)(ECI-Phen)]BF₄ is a promising candidate for oxygen-sensors and PS is an excellent matrix for oxygen sensing material because it owns a large surface-area-to-volume ratio and can supply a homogeneous matrix for probe molecules. Further analysis suggests that the molecular structure of diamine ligand in Cu(I) complexes is critical for sensitivity due to the characteristic electronic structure of excited state Cu(I) complexes.     

N粒子玻色-爱因斯坦凝聚体最大纠缠态的最短制备时间

研究了玻色-爱因斯坦凝聚体(BEC)N粒子体系在最短时间内制备最大纠缠态的相关规律.我们采用玻色-爱因斯坦凝聚体(BEC)两模模型进行研究,探讨了全同粒子系统粒子间相互作用参数c对制备最大纠缠态所需的最短时间的影响;进而讨论了制备最大纠缠态所需的最短时间tmin与系统粒子数N的关系,以及此时系统参数c的取值范围和特点.