Measuring Grüneisen Parameter of Lead by High Pressure-Jump Method

Using the technology of pressure jump, variations of temperature associated with pressure from 2.4 GPa to 4.6 GPa are measured for lead. The Grfuneisen parameter is calculated from the thermodynamic relation γ =（Ks/T）（aT/aP）s, in which substitution of △T/△P for aT/aP at median pressure is strictly justified. The correction of temperature change is carried out by analysing the experimental data, which makes the process more approaching to an adiabatic condition. The calculated values of △T/ △ P and γ gradually decrease with the increasing pressure. The decrease trend is consistent with the previous work. The γ values in the range of 2-3 GPa are averagely higher than the results of Ramakrishnan et al., indicating the effect of temperature correction. The improved method is promising for measurements of Grfineisen parameter to higher pressure range.     

Improved method for loss measurements in planar waveguides

A method employing an isosceles prism and a right-angle one is developed for loss measurement in planar waveguides. During the measuring process, the isosceles prism is fixed and the right-angle prism fixed on the waveguide slides by following the waveguide. Only by adjusting the gap thickness we can realize the loss measurement in planar waveguides. The method is demonstrated with an Ag/Na ion-exchanged waveguide fabricated on BK7 glass from AgNO₃ melt diluted with NaNO₃ (mass ratio 1:9), with the condition of 4 h and . The experimental results show that the method has the advantages on convenient operation, accurate results and no required end polishing.     

Development of an integrated optical system for warpage and hermeticity test of microdisplay

We have developed an integrated optical system to measure the warpage of a microdisplay product at post-packaging die-attach temperature and to test its hermeticity after manufacturing. This system is constructed based on the principle of Twyman/Green (T/G) interferometry and Newton interferometry. T/G interferometry is used to characterize warpage of the microdisplay's base-plate, while Newton interferometry is used to characterize the gap variance between face-plate and base-plate of the microdisplay. With these measurements, deformation and shape of the microdisplay can be comprehensively determined during its manufacturing process, which is critical for its quality test and reliability evaluation. Delicate mechanical system was designed to facilitate the optics integration and alignment. To evaluate the performance of the optical system itself, warpage of a sample was re-measured with Tailor–Hobson profilometer whose resolution is 10 nm, the results from these two testing systems agree well with each other. Some application examples of the integrated testing system were presented to verify its work efficiency.     

离子交换聚合物固定三联吡啶钌电玫化学发光传感器的研究进展

将可电化学再生的电致化学发光试剂-三联吡啶钌固定于电极表面制备得到可再生的电致化学发光(ECL)传感器.综述了近年来使用离子交换聚合物膜固定三联吡啶钌ECL传感器的研究进展,简要介绍了不同离子交换聚合物的固定方法及其相关的应用情况.同时展望了该领域未来的发展方向和前景.     

介质极化的瞬时相位与振幅

求解电子运动的二阶微分方程，在旋转波近似下，介质在外场突然变化时产生的瞬态感应极化与外场同频，但相位总是落后，最大落后为π/2；振幅大小与初态有关，随时间按指数规律衰减，衰减快慢由介质的阻尼系数决定。     

卡尔曼滤波紫外光度法同时测定酱油、食醋中的山梨酸和苯甲酸

在酸性条件下，采用乙酸乙酯萃取、Na2HPO4溶液反萃取分离酱汪、食醋中的山梨酸、苯甲酸，卡尔曼滤波法计算结果，并与比值导数波谱法进行比较。结果表明，卡尔曼滤波法较地数波谱法有较高准确度和精密度，并能监测干扰物质存在与否。用于实际样品分析有更高的可靠性。     

标准芳烃及其混合溶液的同步荧光光谱分析

为了提供区分标准芳烃的实验依据,并为环境中芳烃污染检测提供参考.对10个标准芳烃样品(萘、芴、蒽、菲、荧蒽、苊、芘、1,2-苯并[A]蒽、苯并[k]荧蒽、苯并菲)及其混合溶液(蒽、萘、芴混合溶液,苊、荧蒽、菲混合溶液和芘、1,2-苯并[A]蒽、苯并[k]荧蒽、苯并菲混合溶液)的同步荧光特性进行了分析,获得10种标准芳烃标志峰最好时对应的Δλ值及其标志峰位.在此基础上,通过同步荧光光谱分析区分了三种标准芳烃混合溶液的组分,实验发现对蒽、萘、芴混合溶液,Δλ=3nm时最易区分三种组分;对苊、荧蒽、菲混合溶液,Δλ=3nm或Δλ=10nm均可区分三种组分,相对而言,Δλ=10nm更简便些;对芘、1,2-苯并[A]蒽、苯并[k]荧蒽、苯并菲混合溶液,Δλ=5nm时是最好的,但也仅能区分芘、1,2-苯并[A]蒽、苯并[k]荧蒽三种组分,苯并菲不确定.     

针板型电晕稳定开关的电晕稳定性

设计了一款可用于触发和自触发的针板型电晕稳定开关,其中针电极直径为2 mm,主间隙距离为10 mm,触发间隙为5 mm。通过静电场的模拟得知其场强的不均匀系数大于7,并且通过大量实验数据得出:开关起晕电压和击穿电压分别为6.8 kV和19.3 kV,由此得知电晕稳定开关的电晕稳定因子为0.55,这说明开关具有较好的电晕稳定性。     

CaLuBO4∶Tb^3+荧光粉的制备及发光性质

采用高温固相反应法合成了不同Tb^3+掺杂浓度的CaLuBO4∶xTb^3+荧光粉,研究了样品的晶体结构和发光性质。在紫外光激发下,样品的发射光谱由Tb3+离子的5D3→7FJ(J=6,5,4)和5D4→7FJ′(J′=6,5,4,3)特征发射组成,其中位于545 nm和554 nm附近的5D4→7F5跃迁发射强度最大。荧光粉的激发光谱是由位于紫外区的Tb3+的4f-5d和f-f跃迁构成的。研究了Tb3+浓度对样品发光性质的影响。测量并分析了CaLuBO4∶xTb^3+荧光粉的5D3能级和5D4能级荧光寿命。结果表明,CaLuBO4∶xTb^3+是一种适于紫外激发的新型黄绿光荧光粉。     

Facile fabrication and optical properties of novel Pb(OH)Cl nanotubes

Uniform Pb(OH)Cl nanotubes were synthesized for the first time through a reverse micelles system. The system was consisting of C₁₂E₉ as a surfactant, n-pentanol as a cosurfactant, hexamethylene as the continuous oil phase and lead acetate or sodium chloride solution as the dispersed aqueous phase. The obtained Pb(OH)Cl nanotubes have an average outer diameter of 60 nm, inner diameter of about 40 nm, and an length up to 3 μm as TEM picture showed. And the range of the nanotube diameter is from 50 nm to 70 nm. XRD result indicated that Pb(OH)Cl crystallized in an orthorhombic phase. Photoluminescent (PL) spectrum showed that the product emit in near ultraviolet region and visible region at 335 nm and 439 nm respectively. The experimental results show that reaction temperature have effect on the shape of Pb(OH)Cl nanotubes. A possible formation mechanism was also discussed.