ALL-trans β-CAROTENE-5,6-EPOXIDE IN THYLAKOID MEMBRANES

All- trans β-carotene-5,6-epoxide has been found in the thylakoid membranes of spinach and of the cyanobacterium Synechococcus vulcanus Copeland. The epoxide was extracted from the thylakoid membranes with acetone, and was isolated by high-performance liquid chromatography (HPLC). The structure of the epoxide was identified by means of mass, Raman, and electronic absorption spectroscopy. Changes in the amount of the epoxide, as a result of epoxidation and (apparent) de-epoxidation reactions in the membranes, were traced by analysis of extracts on HPLC. In isolated thylakoid membranes, only the epoxidation reaction took place. The reaction was caused by irradiation or by the addition of ferricyanide, suggesting that electron transport reactions in the membranes are involved in the epoxidation. In intact spinach leaves, however, both epoxidation and de-epoxidation took place; the extent of epoxidation correlated with the intensity of light incident on the leaves. The epoxidation and de-epoxidation of all- trans β-carotene are contrasted with those of xanthophylls (in the violaxanthin cycle).     

Determination of 4-nonylphenol and 4-tert.-octylphenol in water samples by stir bar sorptive extraction and thermal desorption-gas chromatography-mass spectrometry

A simple and highly sensitive method called thermal desorption (TD)-gas chromatography-mass spectrometry (GC-MS), which is used for the determination of trace amounts of 4-nonylphenol (NP) and 4-tert.-octylphenol (OP) in water samples, is described. NP and OP in samples are extracted from water samples and concentrated by the stir bar sorptive extraction (SBSE) technique. A stir bar coated with polydimethylsiloxane (PDMS) is added to a 2.0 ml water sample and stirring is carried out for 60 min at room temperature (25 °C) in a headspace vial. Then the extract is high sensitively analyzed by TD-GC-MS without any derivatization step. The optimum SBSE conditions are realized at an extraction time of 60 min. The detection limits are 0.02 ng ml⁻¹ for NP and 0.002 ng ml⁻¹ for OP. The method shows good linearity over the concentration range of 0.1-10 ng ml⁻¹ for NP and 0.01-10 ng ml⁻¹ for OP, and the correlation coefficients are higher than 0.999. The average recoveries of NP and OP are higher than 97% (R.S.D.: 3.6-6.2%) with correction using the added surrogate standards, 4-(1-methyl) octylphenol-d₅ and deuterium 4-tert.-octylphenol. This simple, accurate, sensitive and selective analytical method may be used in the determination of trace amounts of NP and OP in tap and river water samples.     

Backward Terahertz Radiation from a Two-Color Femtosecond Laser Filament

A change in the quasistatic magnetic susceptibility in thin plates of iron borate (FeBO₃), which is a weak ferromagnet, has been revealed at adsorption of water molecules. The measurements have been performed at room temperature with the use of the magneto-optical Faraday effect. The change of the susceptibility in saturated water vapors is about 30%. The observed effect is reversible. The time of establishing the susceptibility after the introduction of water vapors is 1.5 min, which is twice as large as the time of establishing the susceptibility after the evacuation. The effect is explained by the appearance of uniaxial surface magnetic anisotropy in the basal plane because of the adsorption of water molecules.     

Synthesis,Redox Properties,and Electronic Spectra of Sterically Crowded Triarylphosphines Conjugated with Electron Acceptors

Abstract

Synthesis, redox properties, and electronic spectra of the sterically crowded triarylphosphines conjugated with π-electron systems, especially electron acceptors such as carbonyl group, are briefly reviewed. The sterically crowded triarylphosphines conjugated with various π-electron systems were synthesized from the common synthetic intermediate, (bromoaryl)phosphine, by conventional manner. The sterically crowded triarylphosphines conjugated with the electron acceptors exhibit visible absorption and fluorescence with large Stokes shift. Large solvent effect, redshift in polar solvent, and good correlation with the difference of the oxidation potential of the phosphine moiety and the reduction potential of the acceptor moiety suggest polar excited state resulting from HOMO-LUMO transition.     

Indole alkaloids from Kopsia jasminiflora

Seven new indole alkaloids (aspidofractinine type 1–3, kopsine type 5, strychnos type 6, and vincamine type 7, 8) were isolated from Kopsia jasminiflora (Apocynaceae) collected in Thailand. 5-Oxokopsinic acid (4) was isolated from nature for the first time. The structures of the new alkaloids were determined by spectroscopic analyses and chemical transformation of a known alkaloid. 5,6-Secokopsinine (1) possesses a dialdehyde function that is formed by oxidative cleavage of the C-5–C-6 bond of kopsinine (9). New vincamine-type alkaloid 8 showed potent inhibitory activity toward human cancer cell lines (A549, HT29, HCT116).     

Surface energy properties of lignin particles studied by inverse gas chromatography and interfacial adhesion in polyester composites with electromagnetic transparency

We introduce a simple spray drying method for the scaleup production of spherical organic (lignin) particles with sizes between 0.85 and 1.57 µm. We assess the surface energy of the lignin particles by inverse gas chromatography to reveal their role in composites synthesized with unsaturated polyester. Such nanocomposites are shown to be transparent to electromagnetic irradiation (millimeter wave bands). The permittivity and tanδ of the composite material reached values 3.01 and 0.01 at 28 GHz with 10% lignin content. Vinyl groups were introduced on the surface of the particles to achieve enhanced interfacial adhesion, and resulted in a reduced relative permittivity (2.75). Together with wave interactions, the mechanical and thermal properties of the composites are put in perspective, opening new opportunities in the development of bio-based devices for 5G high-speed communication.

     

Garcinielliptone G from Garcinia subelliptica Induces Apoptosis in Acute Leukemia Cells

Cytotoxicity and apoptosis-inducing properties of compounds isolated from Garcinia subelliptica leaves were investigated. The hexane-soluble portion of MeOH extracts of G. subelliptica leaves that showed cytotoxic activity was separated to yield seven compounds 1–7. Chemical structure analysis using NMR spectroscopy and mass spectrometry confirmed that compound 1 was canophyllol, and compounds 2–7 were garcinielliptones N, O, J, G, F, and garcinielliptin oxide, respectively. Among them, garcinielliptone G (5) showed growth inhibition by causing apoptosis in THP-1 and Jurkat cells derived from human acute monocytic leukemia and T lymphocyte cells, respectively. Apoptosis induced by garcinielliptone G (5) was demonstrated by the detection of early apoptotic cells with fluorescein-labeled Annexin V and increases in cleaved caspase-3 and cleaved PARP protein levels. However, the addition of caspase inhibitor Z-VAD-FMK did not affect growth arrest or apoptosis induction. These results suggest that garcinielliptone G (5) can induce both caspase-3 activation and caspase-independent apoptosis. Therefore, garcinielliptone G (5) may be a potential candidate for acute leukemia treatment.     

Control of Chromophore Symmetry by Positional Isomerism of Peripheral Substituents

The first example of the control of porphyrinoid chromophore symmetry based on the positional isomerism of peripheral substituents has been achieved by preparing tetraazaporphyrins (TAPs) with C_4h, D_2h, C_2v, and C_s symmetry due to the relative arrangement of peripheral tert‐butylamino and cyano groups as push and pull substituents, respectively. The four structural isomers were successfully isolated and characterized by ¹H NMR spectroscopy and X‐ray crystallography. The band morphology in the Q‐band region varies depending on the molecular symmetry due to the significant perturbation introduced into the chromophore by the push and pull substituents. The C_4h and C_2v isomers exhibit a single Q band, whereas the Q bands of the D_2h and C_s isomers show a marked splitting. The magnetic circular dichroism spectra indicate that the push–pull TAPs retain the properties of the 16‐membered 18π‐electron perimeter generally observed for porphyrinoids. Theoretical calculations have demonstrated that the perturbation introduced by the substituents lowers the D_4h symmetry of the parent TAP π‐conjugated system, and this results in significant spectral changes. A novel approach to the fine‐tuning of the spectral properties of porphyrinoids based on changes in the chromophore symmetry is described.     

VLS Growth of ITO Whiskers Prepared by the Electron Shower Method

Indium tin oxide (ITO) whiskers were grown by VLS (vapour-liquid-solid) mechanism, using the electron shower method. The whiskers were grown above 200 °C, and the deposition rate was above 0.6 nm/s. The electron shower controlled the size of the whiskers, and the size was 30 nm in diameter and 600 nm in length. The whiskers grew along the substrate at t < 300 s, but grew in a direction perpendicular to the substrate at t > 300 s. When the ITO whiskers grown along the substrate were used as NO₂ gas sensor, the sensitivity was 340, and about 300 times higher than those of the whiskers grown in a direction perpendicular to the substrate and plate-like ITO crystallites.     

Antibacterial metal implant with a TiO2‐conferred photocatalytic bactericidal effect against Staphylococcus aureus

Photocatalysis with anatase Titanium dioxide (TiO₂) under ultraviolet A (UVA) has a well recognized bactericidal effect. There have been a few reports, however, on the effects of photocatalysis on bio‐implant‐related infections. The purpose of present study was to evaluate the photocatalytic bactericidal effects of anatase TiO₂ on Staphylococcus aureus (S. aureus) associated with surgical site infections. TiO₂ films were synthesized on commercially pure titanium substrates and SUS316 stainless steel using a plasma source ion implantation method followed by annealing. The chemical composition of the surface layers was determined using GXRD and XPS. The disks were seeded with cultured S. aureus and exposed to UVA illumination from black light. The bactericidal effect of the TiO₂ films was evaluated by counting the survived colonies statistically. A structural gradient anatase type TiO₂ layer formed on all substrates. The viability of the bacteria on the photocatalytic TiO₂ film coated on titanium was suppressed to 7.0% at 30 minutes and 5.5% at 45 minutes, whereas that on a similarly coated stainless steel was suppressed to 45.8% at 30 minute and 28.6% at 45 minutes (ANOVA: p < 0.05). Complete bacterial inactivation was achieved after 90 minutes on titanium and after 60 minutes on stainless steel. The photocatalytic bactericidal effect of TiO₂ is useful for sterilizing the contaminated surfaces of bioimplants. Copyright © 2008 John Wiley & Sons, Ltd.