Development of variable‐magnification X‐ray Bragg optics

A novel X‐ray Bragg optics is proposed for variable‐magnification of an X‐ray beam. This X‐ray Bragg optics is composed of two magnifiers in a crossed arrangement, and the magnification factor, M, is controlled through the azimuth angle of each magnifier. The basic properties of the X‐ray optics such as the magnification factor, image transformation matrix and intrinsic acceptance angle are described based on the dynamical theory of X‐ray diffraction. The feasibility of the variable‐magnification X‐ray Bragg optics was verified at the vertical‐wiggler beamline BL‐14B of the Photon Factory. For X‐ray Bragg magnifiers, Si(220) crystals with an asymmetric angle of 14° were used. The magnification factor was calculated to be tunable between 0.1 and 10.0 at a wavelength of 0.112 nm. At various magnification factors (M≥ 1.0), X‐ray images of a nylon mesh were observed with an air‐cooled X‐ray CCD camera. Image deformation caused by the optics could be corrected by using a 2 × 2 transformation matrix and bilinear interpolation method. Not only absorption‐contrast but also edge‐contrast due to Fresnel diffraction was observed in the magnified images.     

Magneto-Optical Measurement of Organic Conductor Using Rotational Cavity System

We have developed a new magneto-optical measurement system using a rotational cavity system equipped with a millimeter vector network analyzer and a 14 T solenoid type super conducting magnet. The measurement can be performed in the transmission configuration down to 1.6 K. The results of the precise angular dependence measurement of quasi-one-dimensional organic conductor (DMET)₂I₃ using the new system are shown, and its Fermi surface will be discussed in connection with the previous reports.     

Enhanced effective mass in doped SrTiO3 and related perovskites

The effective mass is one of the main factors determining the Seebeck coefficient and electrical conductivity of thermo-electrics. In this ab-initio LDA-GGA study the effective mass is estimated from the curvature of electronic bands by one-band-approximation and is in excellent agreement with experimental data of Nb- and La-doped SrTiO₃. It is clarified that the deformation of SrTiO₃ crystals has a significant influence on the bandgap, effective electronic DOS-mass and band-mass, but the electronic effect due to the e_g-band flattening near the Γ-point due to Nb-doping up to 0.2 at% is the main factor for the effective mass increase. Doping of La shows a linear decrease of the effective mass; this can be explained by the different surroundings of A- and B-sites in perovskite. Substitution with other elements such as Ba on the A-site and V on the B-site in SrTiO₃ increases the effective mass as well.     

Fullerenes separation with monomeric type C30 stationary phase in high-performance liquid chromatography

The temperature effect on the separation of fullerenes in LC was examined using monomeric type C30, C18 and C8 alkyl bonded stationary phases. It appears that the C30 phase exhibits superior separation ability for fullerenes. It is observed that the maximum retention temperature of fullerenes on the C30 phase is around 20 degrees C. A strong correlation between the changes in NMR spectra and the retention behavior of the solutes was found. The interpretation of the retention behavior of fullerenes on the alkyl bonded stationary phases, including the behavior in subambient temperature, is discussed using the information obtained by CP-MAS solid-state NMR spectroscopy and LC.     

Characterization of PVA and Chitosan/PVA Blends Prepared from Aqueous Solutions of Various Na2SO4 Concentrations

Uniplaner orientation of a particular crystal plane along the surface of a film was investigated for poly (vinyl alcohol) (PVA) film prepared by a coagulation bath with concentrated aqueous solution containing 100 ∼ 300g of Na₂SO₄ against 1 ℓ of water. The orientation distribution functions of the three crystallographic principal axes of the dried films were obtained by the X-ray diffraction technique. The same treatment was carried out for the films prepared by stretching biaxially of the fresh gel and then by drying the resultant fresh gel. The very high preferential orientation of the crystal chain axes and amorphous chain segments could be realized by the biaxially elongation. Accordingly, the techniques were applied to the biaxially stretching of chitosan and PVA blend films with high Young's modulus. The planer orientation of the chain axes of chitosan and PVA crystallites could be confirmed. The morphology of the film surface was estimated by measurements of contact angle and electron spectroscopy for chemical analysis. The results suggested that the admixture of chitosan decreases wet ability of the specimen and this tendency was slightly enhanced by the biaxially elongation.     

Analysis of free fatty acids by a micro-liquid chromatograph directly coupled with a mass spectrometer through a vacuum nebulizing interface

A liquid chromatograph directly coupled with a quadrupole mass spectrometer through a vacuum nebulizing interface was applied to the analysis of various free fatty acids. Chemical ionization mass spectra of the C₇? C₂₂ free fatty acids were first examined using either methanol or benzene as the reagents. Then the practical compositional analysis of the fatty acids were performed with various biological samples such as bean oil, rape oil, palm oil and milk fat where most of the fatty acids are included as their triglycerides.     

Evidence for beta-chlorocarbenium and beta-bromocarbenium ions

Isotopic perturbation of degenerate equilibrium is used to determine whether tetramethylethylenechloronium and tetramethylethylenebromonium ions are closed 1,2-bridged structures or rapid equilibria of open beta-halocarbenium ions. The observed 13C NMR isotope shifts are consistent with a combination of large equilibrium shifts and small upfield intrinsic shifts. The presence of equilibrium shifts in both halonium ions indicates that these ions are not closed 1,2-bridged structures. Rather, they are best represented by equilibria of beta-halocarbenium ions.     

Theoretical investigation of lone pair inversions, ring openings, and hydride shifts in O-methylated epoxides

Mechanisms associated with the isomerization of the O-methylethylene oxonium ion and its tetramethyl-substituted analogue have been explored using correlated electronic structure calculations. The minima and transition states associated with inversion at the oxygen atom, as well as those associated with opening of the epoxide ring, have been characterized. The calculated barrier to inversion at the oxygen atom for the O-methylethylene oxonium ion, 15.7 kcal/mol, agrees well with the experimentally determined value, 10+/-2 kcal/mol. Our calculations indicate that a significantly higher barrier exists for the ring-opening mechanism that leads to more thermodynamically stable structures. This work includes the first known calculations on the O-methyl-2,3-dimethyl-2-butene oxonium ion along with transition states and intermediates associated with ring opening and inversion at the oxygen atom. Results show that there is a significantly lower barrier to ring opening as compared to the O-methylethylene oxonium ion species, leading to a lower probability of isolating this species. The effects of basis sets and correlation techniques on these ions were also analyzed in this work. Our results indicate that the B3LYP/6-31G* level is reliable for obtaining molecular geometries for both minima and transition states on the C3H7O+ and C7H15O+ potential energy surfaces.     

Effect of substituent on the enantioselectivity for lipase-catalyzed kinetic resolution of glycerol derivatives

The lipase-catalyzed transesterifications of various substituted diphenyl 1,2-ketals of glycerol have been investigated. Efficient modification of the substrate structure with bis(4-bromophenyl) ketal was found to enhance the enantioselectivity up to E=57 at 0 °C.     

Combinatorial synthesis of MUC1 glycopeptides: polymer blotting facilitates chemical and enzymatic synthesis of highly complicated mucin glycopeptides

The chemoselective polymer blotting method allows for rapid and efficient synthesis of glycopeptides based on a "catch and release" strategy between solid-phase and water-soluble polymer supports. We have developed a heterobifunctional linker sensitive to glutamic acid specific protease (BLase). The general procedure consists of five steps, namely (i) the solid-phase synthesis of glycopeptide containing BLase sensitive linker, (ii) subsequent deprotections and the release of the glycopeptide from the resin, (iii) chemoselective blotting of the glycopeptide intermediates in the presence of water-soluble polymers with oxylamino functional groups, (iv) sugar elongations using glycosyltransferases, and (v) the release of target glycopeptides from the polymer platform by selective BLase promoted hydrolysis. The combined use of the solid-phase chemical syntheses of peptides and the enzymatic syntheses of carbohydrates on water-soluble polymers would greatly contribute to the production of complicated glycopeptide libraries, thereby enhancing applicative research. We report here a high-throughput synthetic system for the various types of MUC1 glycopeptides exhibiting a variety of sugar moieties. It is our belief that this concept will become part of the entrenched repertoire for the synthesis of biologically important glycopeptides on the basis of glycosyltransferase reactions in automated and combinatorial syntheses.