Amperometric biosensor based on reductive H2O2 detection using pentacyanoferrate-bound polymer for creatinine determination

Pentacyanoferrate-bound poly(1-vinylimidazole) (PVI[Fe(CN)₅]) was selected as a mediator for amperometric creatinine determination based on the reductive H₂O₂ detection. Creatinine amidohydrolase (CNH), creatine amidohydrolase (CRH), sarcosine oxidase (SOD), peroxidase (POD), and PVI[Fe(CN)₅] were crosslinked with poly(ethylene glycol) diglycidyl ether (PEGDGE) on a glassy carbon (GC) electrode for a creatinine biosensor fabrication. Reduction current was monitored at −0.1 V in the presence of creatinine and O₂. It is revealed that PVI[Fe(CN)₅] is suitable as a mediator for a bioelectrocatalytic reaction of POD, since PVI[Fe(CN)₅] neither reacts with reactants nor works as an electron acceptor of SOD. The amounts of PVI[Fe(CN)₅], PEGDGE, and enzymes were optimized toward creatinine detection. Nafion as a protecting film successfully prevented the enzyme layer from interferences. The detection limit and linear range in creatinine determination were 12 μM and 12–500 μM (R² = 0.993), respectively, and the sensitivity was 11 mA cm⁻² M⁻¹, which is applicable for urine creatinine tests. The results of the creatinine determination for four urine samples measured with this proposed method were compared with Jaffe method, and a good correlation was obtained between the results.     

Separation and purification of 99mTc from 99Mo produced by electron linear accelerator

The medical radionuclide ⁹⁹Mo was produced by the ¹⁰⁰Mo(γ,n) reaction using bremsstrahlung photons generated by an electron linear accelerator. The amount of ⁹⁹Mo produced was compared to that predicted by calculation using the particles and heavy ion transport code system. From the ⁹⁹Mo produced, highly pure ^99mTc was separated using the so-called technetium master milker, and the chemical yield of ^99mTc was 83–99 %. The installation of a new complex using this method and the electron linear accelerator with the preferable specification was suggested, and a possibility to supply the demand of ^99mTc was discussed and shown.

     

Gas Storage in Single-Walled Carbon Nanotubes

Abstract

X-ray diffraction (XRD) and electrical resistance measurement on single-walled carbon nan-otube (SWNT) samples prepared by the arc-discharge method are reported. The XRD profile of heat-treated sample indicated that air (oxygen, and/or nitrogen and/or water) can be condensed inside the SWNTs. We also found that the electrical resistance of SWNT soot is significantly affected by exposing to the oxygen gas and humid air.     

Nonlinear obstacle problems with double phase in the borderline case

In this paper we study a double phase problem with an irregular obstacle. The energy functional under consideration is characterized by the fact that both ellipticity and growth switch between a type of polynomial and a type of logarithm, which can be regarded as a borderline case of the double phase functional with $(p,q)$-growth. We obtain an optimal global Calderón–Zygmund type estimate for the obstacle problem with double phase in the borderline case.     

Cyclization from Higher Excited States of Diarylethenes Having a Substituted Azulene Ring

The cyclization reaction of diarylethenes having an azulene ring occurs only via higher excited states. Novel diarylethenes having an azulene ring with a strong donor or acceptor were synthesized and examined in these reactions. A derivative having an electron-donating 1,3-benzodithiol-2-ylidenemethyl group at the 1-position of the azulene ring showed photochromism, whereas neither a derivative having a π-conjugated electron-donating group at the 3-position of the azulene ring nor derivatives having a π-conjugated electron-withdrawing group at the 1- or 3-position of the azulene ring showed any photochromism. The photoreactivities of these compounds were explained by calculating forces and bond orders on the excited states using density functional theory (DFT) and time-dependent (TD)-DFT.     

Defect Engineering and Anisotropic Modulation of Ionic Transport in Perovskite Solid Electrolyte LixLa(1−x)/3NbO3

Solid electrolytes, such as perovskite Li_3xLa_2/1−xTiO₃, Li_xLa_(1−x)/3NbO₃ and garnet Li₇La₃Zr₂O₁₂ ceramic oxides, have attracted extensive attention in lithium-ion battery research due to their good chemical stability and the improvability of their ionic conductivity with great potential in solid electrolyte battery applications. These solid oxides eliminate safety issues and cycling instability, which are common challenges in the current commercial lithium-ion batteries based on organic liquid electrolytes. However, in practical applications, structural disorders such as point defects and grain boundaries play a dominating role in the ionic transport of these solid electrolytes, where defect engineering to tailor or improve the ionic conductive property is still seldom reported. Here, we demonstrate a defect engineering approach to alter the ionic conductive channels in Li_xLa_(1−x)/3NbO₃ (x = 0.1~0.13) electrolytes based on the rearrangements of La sites through a quenching process. The changes in the occupancy and interstitial defects of La ions lead to anisotropic modulation of ionic conductivity with the increase in quenching temperatures. Our trial in this work on the defect engineering of quenched electrolytes will offer opportunities to optimize ionic conductivity and benefit the solid electrolyte battery applications.     

Cross‐sectional structural characterization of the surface of exfoliated HOPG using HRTEM‐EELS

We analyzed the surface atomic structure of highly oriented pyrolytic graphite (HOPG) substrate exfoliated with adhesive tape, using high‐resolution transmission electron microscopy and scanning transmission electron microscopy‐electron energy‐loss spectroscopy (STEM‐EELS). The surface step height of the exfoliated HOPG substrate was determined using high‐angle annular dark‐field‐scanning transmission electron microscopy (HAADF‐STEM) images and the depth profiles of the EELS spectra of a cross‐sectioned thin foil specimen prepared via focused ion beam milling. The exfoliated surface of the HOPG substrate presented disordered and curved graphene layers. The STEM‐EELS measurements indicated that upon exfoliation, the surface of the HOPG substrate reacted with atmospheric water and oxygen molecules.     

InBr3-catalyzed reduction of ketones with a hydrosilane: deoxygenation of aromatic ketones and selective synthesis of secondary alcohols and symmetrical ethers from aliphatic ketones

An InBr₃-Et₃SiH reducing system was developed to selectively convert aliphatic ketones to a variety of secondary alcohols in moderate to good yields. An initial mixing of InBr₃ and PhSiH₃ was followed by the addition of aliphatic ketones and a solvent to afford the symmetrical ether derivatives.     

The Pt-catalyzed carboselenation of alkynes by selenoesters

[reaction: see text] The Pt-catalyzed carboselenation of terminal alkynes with selenoesters provided vinylselenides regio- and stereoselectively in moderate yields.     

Highly selective iodide-sensing silicone ladder polymer membranes containing a porphyrin and a quaternary ammonium salt.

It has been demonstrated that a glass-like silicone ladder-type polymer permits one to homogeneously incorporate high amounts of ionophores into the covalently-bonded double chain structure. Furthermore, by making use of this feature, we have successfully fabricated an iodide ion-sensitive field-effect transistor based on two kinds of ionophores and silicone ladder polymer matrix. As ionophores, 5,10,15,20-tetraphenyl-21H,23H-porphyrin and dimethyloctadecyl-3-trimethoxylsilylpropylammonium chloride were homogeneously incorporated into the matrix. The ion-sensitive field-effect transistor showed a linear potential response ranging in the I- concentration between 1.0 x 10(-5) and 1.0 x 10(-1) M. The selectivity coefficients for I- towards interferences of ClO4- and NO3- were estimated to be Kpot(I-,ClO4-) approximately 6.2 x 10(-4) and Kpot(I-,No3-) approximately 4.9 x 10(-4). The matrix has proved to be so stable that the selectivity coefficients have not been altered over six months.