小型超导电源系统退磁保护回路建模与仿真

计算了采用二极管等效电压源模型和等效电阻模型的退磁回路电流响应和二极管功耗,分析了两个模型的特点和差异,在此基础上,为了进一步提高精度,充分考虑了二极管的非线性特性,以实际二极管伏安特性进行曲线拟合建立函数关系式得到二极管非线性模型,代入回路方程并求解。综合对比各模型的仿真结果后,得出采用二极管非线性模型和等效电压源模型能更好地模拟退磁保护响应。     

基于抛物方程的海陆环境信号时延与到达角估计

针对复杂海陆环境中的无线信号传播预测问题,研究了适用于抛物方程的信号时延与到达角估计方法。将自由空间中抛物方程轴向波前信号视为本地副本信号,然后利用信号的自相关特性,将接收信号与副本信号进行互相关运算,最后通过相关函数的峰值检索,得到脉冲信号在复杂环境中传播的附加时延。采用数值算例,验证了该方法的正确性和有效性。此外,采用多重信号分类算法,由抛物方程构建接收阵列的协方差矩阵,并对其进行特征值分解,然后利用信号子空间和噪声子空间的正交性,实现复杂环境中的信号到达角估计。仿真结果表明,相比于传统的平面波谱方法,该方法具有更高的多径分辨率。基于上述方法,并结合数字地图,在典型的海陆环境中进行了仿真实验,分析了蒸发波导对脉冲信号传播时延和到达角的影响。     

Time-reversed lasing based on one-dimensional gratings

We show that a one-dimensional grating can generally exhibit time-reversed lasing better than a uniform slab. As the effective refractive index of a grating can be controlled by adjusting the geometric parameters, the time-reversed lasing can be realized for any incident wavelength in it. Moreover, the operating frequency range of coherently perfect absorption for a grating structure is remarkably broad compared with a uniform structure. All these behaviors are demonstrated with GaAs/Air gratings illuminated around 794.8 nm$794.8\text{nm}$. The properties of the proposed grating imply the potential applications such as detectors, transducers, and broad band absorber.     

制服智能选号型装置的研究与设计

针对目前国内制服号型匹配作业效率与精准度低的现状,设计出一种基于配衣参数因子的智能选制服号型装置,能实现快速、智能、精准的对个人制服号型的选择;该装置以超声波身高测量仪、电子体重计、头围测量仪、脚长测量仪、测量控制电路、数据传输转换单元等组成人体测量硬件系统,其作用主要是用于快速采集人体相关测量指标数据;在软件设计方面采用智能选号型算法,其目的是对所采集数据进行智能定量分析,最后准确的匹配出个人制服号型;试验结果表明,该装置设计理论充分且性能良好,具有广泛的应用推广前景。     

Low‐Magnetization Magnetic Microcapsules: A Synergistic Theranostic Platform for Remote Cancer Cells Therapy and Imaging

Multifunctional magnetic microcapsules (MMCs) for the combined cancer cells hyperthermia and chemotherapy in addition to MR imaging are successfully developed. A classical layer‐by‐layer technique of oppositely charged polyelectrolytes (poly(allylamine hydrochloride) (PAH) and poly(4‐styrene sulfonate sodium) (PSS)) is used as it affords great controllability over the preparation together with enhanced loading of the chemotherapeutic drug (doxorubicin, DOX) in the microcapsules. Superparamagnetic iron oxide (SPIOs) nanoparticles are layered in the system to afford MMC1 (one SPIOs layer) and MMC2 (two SPIOs layers). Most interestingly, MMC1 and MMC2 show efficient hyperthermia cell death and controlled DOX release although their magnetic saturation value falls below 2.5 emu g^?1, which is lower than the 7–22 emu g^?1 reported to be the minimum value needed for biomedical applications. Moreover, MMCs are pH responsive where a pH 5.5 (often reported for cancer cells) combined with hyperthermia increases DOX release predictably. Both systems prove viable when used as T2 contrast agents for MR imaging in HeLa cells with high biocompatibility. Thus, MMCs hold a great promise to be used commercially as a theranostic platform as they are controllably prepared, reproducibly enhanced, and serve as drug delivery, hyperthermia, and MRI contrast agents at the same time.     

Refractive index sensing by using Fano resonance enhanced two‐photon luminescence

Utilizing three‐dimensional vectorial electromagnetic simulation, we propose a new refractive index sensing mechanism based on Fano resonance enhanced two‐photon‐absorption induced luminescence (TPL). The TPL from gold nanodisk heptamer (GNDH), which is affected by the refractive index of surrounding material, is used as an example to demonstrate the sensing mechanism facilitated by Fano resonance. The sensitivity of our method is about one order of magnitude better than the conventional refractive index sensing strategy employing plasmonic Fano resonance, while the size of the sensing probe can be further reduced at the same time.

     

$lt;i$gt;α$lt;/i$gt;-碳锗炔稳定性及性质模拟

采用以量子力学为基础的半经验计算方法–自洽和环境依赖的原子轨道线性理论,预测了类α-石墨炔的碳锗炔结构. 研究了α-碳锗炔的稳定结构、电子结构以及热力学稳定性,得到其最稳定的构型是Ge原子在六元环的六个顶角处,晶格常数为8.686 Å的六角原胞构成的单层平面蜂窝状结构. 该结构是带隙为1.078 eV的半导体. α-碳锗炔在很高的温度下都可以保持稳定,直到2280 K时其长程有序态才被破坏,当体系低于此温度时,可以通过降温使其恢复到零温时的稳定平面结构. 关键词： α-石墨炔')" href="#">α-石墨炔 α-碳锗炔')" href="#">α-碳锗炔 分子动力学模拟 热稳定性     

Micro and Macro Injection Molded Parts of Isotactic Polypropylene/Polyethylene Blends: Shear-Induced Crystallization Behaviors and Morphological Characteristics

The present study focused on the importance of scale effect (micro- and macro-injection molded parts) and iPP content to the formation of epitaxial crystallization and crystal structure formed in injection-molded bars of high-density polyethylene (HDPE)/isotactic polypropylene (iPP) blends. After making the blends with different iPP content via melt mixing, the injection-molded bars were prepared via both micro and conventional injection molding. Hot stage polarized light microscopy (HS-PLM), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD) were used to investigate their morphological and crystal features. The results indicated that an appropriate matching of micro-part and relative high iPP content was most favorable for epitaxial crystallization. The micro-parts had a large fraction of shear layer in comparison with macro-parts. The SEM observations showed that the shear layer of the former consisted of a highly oriented shish-kebab structure. The memory effect of the crystalline structure of the micro-parts and macro-parts at high temperature, investigated in detail through HS-PLM experiments, showed that micro-part had a relatively high memory effect of the preceding crystallization process.     

Dynamics analysis and synchronization of a new chaotic attractor

In this paper, a new simple chaotic system is discussed. Basic dynamical properties of the new attractor are demonstrated in terms of phase portraits, equilibria and stability, Lyapunov exponents, a dissipative system, Poincaré mapping, bifurcation diagram, especially Hopf bifurcation. Next, based on well-known Lyapunov stability theorem, backstepping design is proposed for synchronization of the new chaotic system. At last, numerical studies are provided to illustrate the effectiveness of the presented scheme.     

InGaZnO薄膜晶体管泄漏电流模型

研究了非晶氧化锌镓铟薄膜晶体管(amorphous InGaZnO thin-film transistor,InGaZnO TFT)的泄漏电流模型.基于Poole-Frenkel热发射效应和热离子场致发射效应的泄漏电流产生机制,分别得到了高电场和低电场条件下的载流子产生-复合率.在此基础上推导得到了InGaZnO TFT的分段式泄漏电流-电压数学模型,并利用平滑函数得到了关断区和亚阈区连续统一的泄漏电流模型.所提出的泄漏电流模型的计算值和TCAD模拟值与实验结果较为吻合.利用所提出的InGaZnO TFT泄漏电流模型和TCAD模拟,讨论了InGaZnO TFT不同的沟道宽度、沟道长度和栅介质层厚度对泄漏电流值的影响.研究结果对InGaZnO TFT集成传感电路的设计具有一定参考价值.