Influence of NH beam bombarding energy on structural characterization and cell attachment of CNx coating

The carbon nitride (CN_x) coating with its novel properties will be excellent candidate for biomedical applications. CN_x coatings were prepared on the surface of Ti–6Al–4V by ion-beam-assisted deposition (IBAD) with different NHⁿ⁺ beam bombarding energies at low substrate temperature. The coatings were characterized by Scanning electron microscopy (SEM), Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and Fourier-transform infrared (FTIR) spectroscopy. The result showed that the wear-resistance of CN_x coatings was better at higher beam bombarding energy. The cell attachment tests also gave interesting results that CN_x coatings exhibited low macrophage attachment and provide desirable surface for the normal cellular growth and morphology of the fibroblasts. Structural analysis showed that NHⁿ⁺ beam bombardment at the energies of 300–400 eV could result in more nitrogen concentration and fraction of sp³CN bonds in the structure of CN_x coatings, which may be responsible for the improvement in the wear-resistance and the cell attachment.     

SHS等离子喷涂制备FeAl2O4-Al2O3-Fe纳米复合涂层的研究

利用SHS等离子喷涂技术,将经过机械团聚法制备的Fe2O3-Al复合粉体送入等离子焰流,沉积出厚度约为400 μm的复合涂层.利用XRD,SEM 和TEM等检测手段对涂层的成分和组织进行了分析,测定了涂层的显微硬度、断裂韧性以及耐磨性.结果表明涂层为具有纳米结构的FeAl2O4-Al2O3-Fe纳米复合组织;涂层的显微硬度为HV100g870;断裂韧性是普通Al2O3涂层的2倍;无润滑磨损的耐磨性是普通Al2O3涂层的2.5倍.     

Li2O-2B2O3熔体的物性研究

系统测量了四硼酸锂(Li2O-2B2O3)熔体的密度ρ、表面张力γ随着温度的变化规律,实验结果表明在1100K到1500K范围内Li2O-2B2O3高温熔体的密度和表面张力随着温度的升高均线性减小.通过实验数据拟合得出熔体密度与温度关系为ρ(T)=2.574-4.89×10-4T,熔点处LiO-2B2O3熔体的密度为1.992g/cm3;熔体表面张力与温度关系的拟合公式为γ=262.8-4.59×10-2T.     

Monte Carlo simulation of the dynamic evolution ofbinary lamellar eutectic in directional solidification

The dynamic evolution of the lamellar eutectic of binary alloys in directional solidification is studied in detail using the Monte Carlo technique. The simulated results can be summarized into two aspects: ({1}) the lamellar spacing λ is found to be inversely proportional to the chemical potential difference Δμ, predicting a linear relationship between the kinetic supercooling ΔT_k and total supercooling at the solid/liquid (S/L) interface; (2) as the solidifying velocity R is low, the dynamic product λ^{2}R shows a considerable dependence on temperature gradient G_T in the liquid in front of the S/L interface, although this dependence becomes much weaker at a high R.     

Synthesis, characterization and mechanism of cetyltrimethylammonium bromide bilayer-encapsulated gold nanosheets and nanocrystals

Single-crystal Au nanosheets and fcc gold nanocrystals of uniform size were synthesized by a novel and simple route. The results of field-emission scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD) indicated the formation of the single-crystal structure of gold nanosheets and fcc nanocrystals. Energy-dispersive analysis of X-ray (EDAX) showed absorbance of cetyltrimethylammonium bromide (CTAB) molecules onto the surface of gold nanostructures. Moreover, zeta potential measurements showed that CTAB-coated nanostructures were positively charged and the zeta potential remained almost the same upon centrifugation and redispersion of the resulting nanostructures in methanol, confirming the high stability of the surfactant-protected nanocomposites. Evolution of the nanostructures during the reaction was monitored by TEM observations. The results indicated that the formation of the gold nanostructures followed a two-step mechanism with a bilayer CTAB structure on the surface of the gold nanostructures.     

Orientation-dependent deformation mechanisms of bcc niobium nanoparticles

Nanoparticles usually exhibit pronounced anisotropic properties, and a close insight into the atomic-scale deformation mechanisms is of great interest. In present study, atomic simulations are conducted to analyse the compression of bcc nanoparticles, and orientation-dependent features are addressed. It is revealed that surface morphology under indenter predominantly governs the initial elastic response. The loading curve follows the flat punch contact model in [1 1 0] compression, while it obeys the Hertzian contact model in [1 1 1] and [0 0 1] compressions. In plastic deformation regime, full dislocation gliding is dominated in [1 1 0] compression, while deformation twinning is prominent in [1 1 1] compression, and these two mechanisms coexist in [0 0 1] compression. Such deformation mechanisms are distinct from those in bulk crystals under nanoindentation and nanopillars under compression, and the major differences are also illuminated. Our results provide an atomic perspective on the mechanical behaviours of bcc nanoparticles and are helpful for the design of nanoparticle-based components and systems.     

HZ associated production with decay in the Alternative Left-Right Model at CEPC and future linear colliders

In this study, Higgs and Z boson associated production with subsequent decay is attempted in the framework of alternative left-right model, which is motivated by superstring-inspired E_6 model at CEPC and future linear colliders. We systematically analyze each decay channel of Higgs with theoretical constraints and latest experimental methods. Due to the mixing of scalars in the Higgs sector, charged Higgs bosons can play an essential role in the phenomenological analysis of this process. Even though the predictions of this model for the signal strengths of this process are close to the standard model expectations, it can be distinct under high luminosity.     

Recent Progress in the Electrolytes of Aqueous Zinc-Ion Batteries

Rechargeable aqueous zinc-ion batteries (ZIBs) have garnered tremendous attention in the field of next energy storage devices due to their high safety, low cost, abundant resources, and eco-friendliness. As an important component of the zinc-ion battery, the electrolyte plays a vital role in the electrochemical properties, since it will provide a pathway for the migrations of the zinc ions between the cathode and anode, and determine the ionic conductivity, electrochemically stable potential window, and reaction mechanism. In this Minireview, a brief introduction of electrochemical principles of the aqueous ZIBs is discussed and the recent advances of various aqueous electrolytes for ZIBs, including liquid, gel, and multifunctional hydrogel electrolytes are also summarized. Furthermore, the remaining challenges and future directions of electrolytes in aqueous ZIBs are also discussed, which could provide clues for the following development.     

Rational Design of Hierarchical SiO2@TiO2 Composite with Large Internal Void Space for High-Performance Microwave Absorption

Russian Journal of Physical Chemistry A - The design and development of excellent microwave absorption (MA) material is significant for healthcare, electronic, and security industries. Herein, a...     

Radical Heteroarylalkylation of Alkenes via Three‐Component Docking‐Migration Thioetherification Cascade

A novel, rational‐designed approach to access various heteroaryl‐substituted alkyl thioethers was developed via docking‐migration cascade process. By utilizing three components involving alkene, dual‐function reagent, and thioetherificating reagent, radical heteroarylalkylation of alkenes followed by thiolation of the alkyl radical intermediates proceeded smoothly, manifesting well compatibility of substrates and cascade transformations. Furthermore, this protocol also features mild conditions, broad substrate scope, and wide product diversity.