Thin Film Exfoliation in the Zone of Trapped Elastic Wave Localization

In modern constructions, thin-layer coats are often used as protecting or strengthening elements. Deformations of such constructions may cause significant stresses on the interface between the base and the coat because of the difference in their physical mechanical properties, which leads to the destruction or detachment of the cover. The impact of static or shock loads on the emergence and development of delamination in multilayer constructions has been studied fairly well, but much less is known about destructions of this type under nonstationary (vibrational) loads. The interest in the latter is caused by the fact that even small variable actions may cause the localization of oscillations in a neighborhood of inhomogeneities (such as inclusions, defects, construction elements, etc.) [1] (and lead to the emergence and growth of defects, which strongly affects the reliability and functionality of the whole construction. The possibility of the localization of oscillations near initial delamination and the impact of localization on the growth of the delamination are studied and a model for analyzing conditions under which a detachment zone grows or ceases to grow is suggested. (© 2011 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Fast Detection Allows Analysis of the Electronic Structure of Metalloprotein by X-ray Emission Spectroscopy at Room Temperature

The paradigm of "detection-before-destruction" was tested for a metalloprotein complex exposed at room temperature to the high x-ray flux typical of third generation synchrotron sources. Following the progression of the x-ray induced damage by Mn Kβ x-ray emission spectroscopy, we demonstrated the feasibility of collecting room temperature data on the electronic structure of native Photosystem II, a trans-membrane metalloprotein complex containing a Mn(4)Ca cluster. The determined non-damaging observation timeframe (about 100 milliseconds using continuous monochromatic beam, deposited dose 1*10(7) photons/μm(2) or 1.3*10(4) Gy, and 66 microseconds in pulsed mode using pink beam, deposited dose 4*10(7) photons/μm(2) or 4.2*10(4) Gy) is sufficient for the analysis of this protein's electron dynamics and catalytic mechanism at room temperature. Reported time frames are expected to be representative for other metalloproteins. The described instrumentation, based on the short working distance dispersive spectrometer, and experimental methodology is broadly applicable to time-resolved x-ray emission analysis at synchrotron and x-ray free-electron laser light sources.     

Reactions of 1-alkyl-1,2-diphospholes with 1,3-dipoles: diphenyldiazomethane and nitrones

The reaction of 1-alkyl-1,2-diphosphacyclopenta-2,4-dienes (1-alkyl-1,2-diphospholes) (1) with diphenyldiazomethane proceeds at room temperature via unstable [3+2] cycloadducts to form bicyclic phosphiranes (2). However, 1-alkyl-1,2-diphospholes (1) react with N,alpha-diphenylnitrone or N-tert-butyl-alpha-phenylnitrone depending on the temperature to give either dimers of 1-alkyl-1-oxo-1,2-diphospholes (5) or 1-alkyl-1,7-dioxo-6-azo-1,7-diphospha-bicyclo[3.2.0]hept-2-enes (7) - phosphorus analogues of β-lactams.     

Unfairly forgotten member of the iodocarborane family: synthesis and structural characterization of 8-iodo-1,2-dicarba-closo-dodecaborane, its precursors, and derivatives

8-Iodo-1,2-dicarba-closo-dodecaborane (7) was prepared in three steps starting from decaborane-14 with 20% overall yield. In the presence of nucleophiles, compound 7 undergoes selective removal of the boron vertex in the position para to the iodine substituent to form the anionic nido-carborane 1-iodo-7,8-dicarba-nido-undecaborate. Capping of the corresponding dicarbollide dianion with BI(3) led to formation of the new carborane, 3,10-diiodo-1,2-dicarba-closo-dodecaborane (15). The same dicarbollide dianion reacts with cobalt and nickel acetylacetonates in anhydrous tetrahydrofuran to form the corresponding bis(dicarbollide) complexes with excellent yields. All compounds were characterized by multinuclear NMR and high-resolution mass spectroscopy. Structures of 2-iododecaborane (2), 8-iodo-1,2-dicarba-closo-dodecaborane (7), 1-ethoxycarbonyl-8-iodo-1,2-dicarba-closo-dodecaborane (10), cesium 1-iodo-7,8-dicarba-nido-undecaborate (13), 3,10-diiodo-1,2-dicarba-closo-dodecaborane (15), and cesium 3,3'-commo-(10-iodo-1,2-dicarba-3-cobalta-closo-dodecaborane)-(10'-iodo-1',2'-dicarba-3'-cobalta-closo-dodecaborane) (16) were established by X-ray analysis of single crystals.     

A Water-Soluble Sodium Pectate Complex with Copper as an Electrochemical Catalyst for Carbon Dioxide Reduction

A selective noble-metal-free molecular catalyst has emerged as a fruitful approach in the quest for designing efficient and stable catalytic materials for CO₂ reduction. In this work, we report that a sodium pectate complex of copper (PG-NaCu) proved to be highly active in the electrocatalytic conversion of CO₂ to CH₄ in water. Stability and selectivity of conversion of CO₂ to CH₄ as a product at a glassy carbon electrode were discovered. The copper complex PG-NaCu was synthesized and characterized by physicochemical methods. The electrochemical CO₂ reduction reaction (CO₂RR) proceeds at −1.5 V vs. Ag/AgCl at ~10 mA/cm² current densities in the presence of the catalyst. The current density decreases by less than 20% within 12 h of electrolysis (the main decrease occurs in the first 3 h of electrolysis in the presence of CO₂). This copper pectate complex (PG-NaCu) combines the advantages of heterogeneous and homogeneous catalysts, the stability of heterogeneous solid materials and the performance (high activity and selectivity) of molecular catalysts.     

Hydrophilicity Impact upon Physical Properties of the Environmentally Friendly Poly(3-hydroxybutyrate) Blends: Modification Via Blending

We have integrated scientific research of polymer blends on the base of poly-3-hydroxybutyrate (PHB and its copolymers) with bench testing in blend preparation by both solvent casting and melt extrusion. As a second component, we have used traditional synthetic macromolecules with various hydrophilicity degree and hence with different morphologies and physical behavior. Besides, variation of polymer hydrophilicity permits to control both the service characteristic and the rate of (bio)degradation operating in the presence of water. Therefore, a substantial part of our work is devoted to water transport in the parent PHB and its blends. Combining the morphology knowledge (SEM, WAXS, FTIR tecynique), transport characteristics (permeability cells and McBain spring microbalance), and mechanical testing, we propose that blending of the parent biodegradable polymer with synthetic macromolecules is a perspective tool to design novel materials with improved characteristics. Both the water transport coefficients and the mechanical characteristics are essentially sensitive to structure and morphology of the blends. Hydrophilicity variation in the order LDPE < SPEU < PVA at blending with PHB shows that the morphology transformation in immicsible or partly miscible blends shifted along the PHB concentration scale as LDPE (at ∼16 wt% PHB) < PVA (∼30 wt% PHB) < SPEU (∼50 wt% PHB) Our instrumental monitoring the structural hierarchy of parent polymers and their blends as well as , simultaneously, the study of transport processes, their modeling, and computer simulating open up the way to understanding the precepts of polymer operation in corrosive and bioactive media.