Design and synthesis of novel type somatostatin analogs with antiproliferative activities on A431 tumor cells

It was reported that the somatostatin analog TT-232, d-Phe-c(Cys-Tyr-d-Trp-Lys-Cys)-Thr-NH₂, exhibited a highly potent antitumor activity in vitro and in vivo. Using pyrazinone analogs and aliphatic amino acids instead of the disulfide bond, we prepared novel type somatostatin analogs including the sequence essential for antitumor activities, Tyr-d-Trp-Lys. These analogs exhibited antiproliferative effect on A431 tumor cells.     

Pre-fibrillation of pulps to manufacture cellulose nanofiber-reinforced high-density polyethylene using the dry pulp direct kneading method

The dry pulp direct kneading method is an industrially viable, low-energy process for manufacturing cellulose nanofiber (CNF)-reinforced polymer composites, where the chemically modified pulps are nanofibrillated and uniformly dispersed in the polymer matrix during melt compounding. In the present study, cellulose fibers of various sizes ranging from surface-fibrillated pulps (20 μm in width) to fine CNFs (20 nm in width) were prepared from softwood bleached kraft pulps using a refiner and a high-pressure homogenizer. These cellulose fibers were modified with alkenyl succinic anhydride and dried. The dried fibers were used as a feed material for melt compounding in the dry pulp direct kneading method to fabricate CNF-reinforced high-density polyethylene (HDPE). When surface-fibrillated pulps were employed as a feed material, the pulps were nanofibrillated and dispersed uniformly in the HDPE matrix during melt compounding. The resulting composites had much better properties—i.e., much higher tensile modulus and strength values, and much lower coefficient of thermal expansion values—than the composites produced using pulps without pre-fibrillation. However, when CNFs were used as a feed material, they were shortened and agglomerated during melt compounding, and the properties of the composites consequently deteriorated. The study concludes that surface-fibrillated pulp, which can be produced cost-effectively using a refiner on an industrial scale, is more suitable as a feed material than CNFs for melt compounding in the dry pulp direct kneading method. This finding enables the elimination of a preliminary step in the preparation of CNFs from pulps, which is a time-consuming and energy-intensive process.

Graphical abstract

     

Kinetic study of the electron-transfer oxidation of the phenolate anion of a vitamin E model by molecular oxygen generating superoxide anion in an aprotic medium

Electron-transfer reduction of molecular oxygen (O2) by the phenolate anion (1-) of a vitamin E model, 2,2,5,7,8-pentamethylchroman-6-ol (1H), occurred to produce superoxide anion, which could be directly detected by a low-temperature EPR measurement. The rate of electron transfer from 1- to O2 was relatively slow, since this process is energetically unfavourable. The one-electron oxidation potential of 1- determined by cyclic voltammetric measurements is sufficiently negative to reduce 2,2-bis(4-tert-octylphenyl)-1-picrylhydrazyl radical (DOPPH*) to the corresponding one-electron reduced anion, DOPPH-, suggesting that 1- can also act as an efficient radical scavenger.     

Synthesis of Optically Active P‐Chiral and Optically Inactive Oligophosphines

A series of optically active P‐chiral oligophosphines (S,R,R,S)‐ 2 , (S,R,S,S,R,S)‐ 3 , (S,R,S,R,R,S,R,S)‐ 4 , and (S,R,S,R,S,R,R,S,R,S,R,S)‐ 5 with four, six, eight, and 12 chiral phosphorus atoms, respectively, were successfully synthesized by a step‐by‐step oxidative‐coupling reaction from (S,S)‐ 1 . The corresponding optically inactive oligophosphines 1′ – 5′ were also prepared. Their properties were characterized by DSC, XRD, and optical‐rotation analyses. While optically active bisphosphine (S,S)‐ 1 and tetraphosphine (S,R,R,S)‐ 2 behaved as small molecules, octaphosphine (S,R,S,R,R,S,R,S)‐ 4 and dodecaphosphine (S,R,S,R,S,R,R,S,R,S,R,S)‐ 5 exhibited the features of a polymer. Furthermore, DSC and XRD analyses showed that hexaphosphine (S,R,S,S,R,S)‐ 3 is an intermediate between a small molecule and a polymer. Comparison of optically active oligophosphines 1 – 5 with the corresponding optically inactive oligophosphines 1′ – 5′ revealed that the optically active phosphines have higher crystallinity than the optically inactive counterparts. It is considered that the properties of oligophosphines depend on the enantiomeric purity as well as the oligomer chain length.     

Preparation of aromatic copolyesteramides by the direct polycondensation with a vilsmeier adduct derived from tosyl chloride and N,N-dimethylformamide

The reaction promoted by Vilsmeier adduct derived from tosyl chloride (TsCl) with N,N-dimethylformamide (DMF) was successfully applied to the preparation of copolyesteramides of high molecular weights directly from aromatic dicarboxylic acids, diamines, and bisphenols. The polycondensation was significantly affected by the reaction of activated dicarboxylic acids with bisphenols and diamines. Addition of a mixture of bisphenols and diamines likely caused gelation of the reaction mixtures, resulting in insoluble polymers, especially with high mol % diamines. Stepweise addition of them, however, gave the homogeneous reaction mixtures and copolymers of better solubility. These phenomena were studied in terms of sequence length distribution of polyester units, which was estimated by thermal analyses of the random copolymers prepared under various conditions for the initial reaction with bisphenols.     

Effect of acidity on the extraction and kinetic stability of the copper(II)/APCD/IBMK system in strongly acidic media

The extraction of copper(II) from strongly acidic solution (0.01-8M hydrochloric acid) with ammonium 1-pyrrolidinecarbodithioate in isobutyl methyl ketone has been investigated. The shaking time needed for quantitative extraction decreases as the acidity is increased. The effect of the mutual solubility of the organic solvent and the aqueous phase is significant when the acidity of the aqueous phase is increased. The acidity of the aqueous phase mainly affects the kinetic stability of the chelate during the shaking period, rather than the decomposition of the chelating agent. The kinetic stability of the chelate apparently depends on the mole ratio of reagent to copper, the half-lives for the chelate extracted from 4M hydrochloric acid being 29.0, 40.0 and 85.0 min for reagent: metal mole ratios of 10, 100 and 1000, respectively.     

Synthesis of isoxazolo[2,3-a]quinoxalines and pyrrolo[1,2-a]quinoxalines by 1,3-dipolar cycloaddition reaction

The isoxazolo[2,3-a]quinoxalines 11a,b and pyrrolo[1,2-a]quinoxalines 12a,b were selectively synthesized from the 2-substituted 6-chloroquinoxaline 4-oxides 10a,b . The pyrrolo[1,2-a]quinoxalines 12a,b were clarified to be produced by the ring transformation of the isoxazolo[2,3-a]quinoxalines 11a,b . The pyrrolo[1,2-a]quinoxalines 14a,b were obtained from both 2,6-dichloroquinoxaline 4-oxide 9 and compounds 12a,b .     

Radiological status of Rongelap Island in 1999

A radiological survey and whole body counting of ¹³⁷Cs were carried out in Rongelap Island (main island) of Rongelap Atoll in July 1999. The maximum values of ¹³⁷Cs contamination and of g-ray dose rate were 39 kBq/m² and 0.033 mSv/h, respectively. The maximum a and b gross counting rates on the surface of ground were 1 cpm and 182 cpm in active area of 72 cm², respectively. Activity of ^239,240Pu for soil was 80 Bq/kg in the top 5 cm and aerial deposition was 3.4 kBq/m² in Rongelap Island in 1999. The body burden of ¹³⁷Cs was observed to be 27±11 Bq/kg for 6 workers. Assessment of external and internal annual doses (0.1 and 0.07 mSv/y) indicates that as of 1999 there is no large risk to the inhabitants of Rongelap Island from a radiological point of view. The radiological status of Rongelap Island, which was severely contaminated by the radiological fallouts of nuclear testings carried out in 1954, has improved year by year as shown by the decrease of ¹³⁷Cs. The effective halftime of ¹³⁷Cs, which is estimated to be 6.6 y is much shorter than the physical half-life of ¹³⁷Cs. Radioactive contamination in Kaballe Island, (a part of the northern islands used for farming) which is located 25 km northeast of Rongelap Island, was still high in 1999. One site nearby a beach was highly contaminated with ¹³⁷Cs, where the maximum activity of ¹³⁷Cs was 3.4 MBq/m², a-ray of 2 cpm, b-ray of 1205 cpm and g-ray of 0.73 mSv/h. Activity of ^239,240Pu in soil (n = 1) was 294 Bq/kg (top 5 cm) and 16 kBq/m².     

Structural difference between a superconducting sodium cobalt oxide and its related phase

Monolayer hydrate (MLH) Na_xCoO₂·y′H₂O was obtained from superconducting bilayer hydrate (BLH) Na_xCoO₂·yH₂O by partial extraction of H₂O molecules between the CoO₂ layers. Magnetization measurements indicated that electron densities in the CoO₂ layer of the MLH phase remained unchanged after the water extraction. Nevertheless, superconductivity was completely suppressed in the MLH phase. This strongly suggests that the highly 2D nature in the BLH phase due to its thick insulating layers consisting of H₂O molecules and Na⁺ ions plays an important role for inducing superconductivity.     

Novel and efficient chiral sulfideoxathiane ligands for palladium-catalyzed asymmetric allylic alkylation

Easily prepared, chiral sulfideoxathiane ligands are described which give excellent enantioselectivity (up to 99% ee) in the Pd-catalyzed allylic alkylation of 1,3-diphenyl-2-propenyl acetate with a range of alkyl malonate nucleophiles.