The oldest mid-oceanic carbonate buildup complex: Setting and lithofacies of the Vendian (Late Neoproterozoic) Baratal limestone in the Gorny Altai Mountains,Siberia

The Baratal limestone in the Gorny Altai Mountains, southern Siberia, occurs as large allochthonous blocks within a Cambrian accretionary complex that developed around the Siberia craton. Before the final accretion to Siberia in the Cambrian, the terrigenous clastic-free Baratal limestone was deposited directly upon a basaltic basement with a geochemical signature identical to that of modern oceanic plateau. The Baratal limestone with 598 ± 25 Ma (Early Vendian) Pb-Pb isochron age consists of three distinct facies; 1) massive lime mudstone with ooids and stromatolites, 2) bedded lime mudstone, and 3) limestone conglomerate/breccia dominated by ooid-bearing lime mudstone clasts. The first represents a shallow marine environment on top of an ancient oceanic plateau, while the latter two represent the deeper slope to bottom-of-slope facies of a plateau. The Vendian Baratal limestone provides the oldest example of a reconstructed shallow marine carbonate buildup complex developed on a plateau/seamount in a mid-ocean.     

Energetics and structural stability of Cs3C60

Using the ab initio pseudopotential total-energy method and the density-functional theory, we study the energetics of face-centered-cubic Cs₃C₆₀ which is a material of great interest as a possible high transition-temperature superconductor. At the optimized lattice constant the volume per C₆₀ is found to be smaller than the the most-stable hexagon-coordination A15 phase, while the total energy of the fcc phase is about 0.9 eV higher than the A15 phase. These results indicate that a low-temperature and high-pressure synthesis method might be a possible way to produce the fcc Cs₃C₆₀ phase. In addition, it is also found that the A15 Cs₃C₆₀ should show a phase transformation from a hexagon-coordination phase to a pentagon-coordination phase under hydrostatic pressure.     

Measurement of Cu K-shell and Ag L-shell ionization cross sections by low-energy positron impact

Inner shell ionization cross sections by low-energy positron impact have been measured. Development of an x-ray detector with thin Si(Li) crystals has enabled the first measurements of the absolute cross sections for the positron impacts in the energy range below 30 keV. Threshold behavior of the measured cross sections for the Cu K shell and Ag L shell are compared with the theoretical results of Gryzinski and Kowalski [Phys. Lett. A 183, 196 (1993)]] and Khare and Wadehra [Can. J. Phys. 74, 376 (1996)]]. Good agreement has been found for the Cu K shell, while the experimental values for the Ag L shell were found to be smaller than the corresponding theoretical results.     

Observation of the effects of radially sheared electric fields on the suppression of turbulent vortex structures and the associated transverse loss in GAMMA 10

Vortexlike turbulent structures in hot-ion mode plasmas with several keV are observed in the case with a radially produced weak shear of electric fields E(r). However, a strong E(r) shear formation due to a high ion-confining potential phi(c) production clears up these vortices together with plasma-confinement improvement and disappearance of both drift-wave and turbulencelike Fourier spectral signals. These findings are based on three-time progress in phi(c) in comparison to phi(c) attained 1992-2002. The significant advance of phi(c) is well extended in line with proposed potential-formation physics scalings.     

Dephasing of a superconducting flux qubit

In order to gain a better understanding of the origin of decoherence in superconducting flux qubits, we have measured the magnetic field dependence of the characteristic energy relaxation time (T(1)) and echo phase relaxation time (T(2)(echo)) near the optimal operating point of a flux qubit. We have measured T(2)(echo) by means of the phase cycling method. At the optimal point, we found the relation T(2)(echo) approximately 2T(1). This means that the echo decay time is limited by the energy relaxation (T(1) process). Moving away from the optimal point, we observe a linear increase of the phase relaxation rate (1/T(2)(echo)) with the applied external magnetic flux. This behavior can be well explained by the influence of magnetic flux noise with a 1/f spectrum on the qubit.     

Study for noise reduction in synchrotron radiation based scanning tunneling microscopy by developing insulator-coat tip

To solve difficulties of instability and inaccuracy in synchrotron radiation based scanning tunneling microscopy, a method to reduce noise was investigated. New insulator-coat tips were developed to shut out electrons coming from a wide area that damage the spatial resolution. By changing the exposed conductive area at the end of the insulator-coat tips, the effect of noise reduction was estimated. The tip with an exposure area of 50 nm in diameter was found to reduce noise effectively. Also a key discriminating condition was found to obtain the local signal, which is based on the modulation of the X-ray-induced tip current caused by excitation of the specific element.     

Growth process of TiC clusters from Ti nanoparticles with evaporated carbon layer

Titanium carbide formation by the solid–solid reaction on the surface of Ti nanoparticles was studied in situ using a high-resolution transmission electron microscope with a heating stage. The cross-sectional image of the Ti surface was clearly observed. Vacuum-deposited carbon covered the whole the surface of Ti nanoparticles in spite of the partly evaporation on the nanoparticle surface. The diffusion of the carbon atoms inside the Ti nanoparticles depended on the size of the nanoparticles. When the Ti nanoparticle diameter was less than 30 nm, carbon atoms diffused into the Ti nanoparticle and formed TiC. The superstructure of the Ti nanoparticles was observed, which revealed the growth process of TiC to be the diffusion of carbon atoms. For Ti nanoparticles with diameter larger than 30 nm it was observed that diffusion of Ti atoms into the carbon layer was dominant, which resulted in formation of TiC in the carbon layer at the surface of Ti nanoparticles.     

Performance Test of CW 300?GHz Gyrotron FU CW I

A 300 GHz CW gyrotron FU CW I has been developed and installed in the Research Center for Development of Far-Infrared Region, University of Fukui as a power source of a high frequency material processing system. Its performance was tested and the maximum power of 1.75 kW / CW has been attained at the beam voltage of 15 kV and the beam current of 1A. The maximum window power efficiency of 15.5% has been obtained at the cathode voltage slightly lower than 15 kV. This gyrotron is designed to deliver a Gaussian beam after mode conversion from the oscillation mode TE_22,8 in the cavity with a complex of an internal radiator and beam shaping mirrors. The detailed measurement with an infrared camera has confirmed that a Gaussian beam is radiated when the magnetic field strength B _c at the cavity is adjusted at a proper value. However, within a range of B _c , the output power is emerged into multiple directions, which suggests simultaneous oscillation of competing cavity modes.     

Off-resonant fifth-order response function for two-dimensional Raman spectroscopy of liquids CS2 and H2O

The off-resonant fifth-order response functions for two-dimensional (2D) Raman spectroscopy of molecular liquids CS2 and H2O are investigated by using molecular dynamics calculation. This spectroscopy, able to deal with a phase space dynamics, shows the existence of nodal lines in several polarization tensor elements [see L. Kaufman et al., Phys. Rev. Lett. 88, 207402 (2002) for experimental results]. The nodal property is found to arise from the dynamical couplings among rotational modes, not accounted for in a normal mode picture. The effects of anharmonicities and "mode coupling through polarizability" are also investigated by comparing the 2D Raman signal with a constant temperature velocity reassignment echo method.     

Potential formation and high density plasma production on the tandem mirror GAMMA 10

GAMMA 10 experiments have advanced in high density experiments after the last EPS Workshop where we reported high density plasma production by using an ion cyclotron range of frequency heating at a high harmonic frequency and neutral beam injection in the central cell. Recently a high density plasma was obtained with much improved reproducibility than before and without degradation of diamagnetic signal. The high density plasma was attained by adjusting the spacing of the conducting plates installed in the anchor transition regions. Dependencies of particle confinement time, ion energy confinement time and plasma confining potential on plasma density were obtained for the first time in the high density region. Presented at 5th Workshop “Role of Electric Fields in Plasma Confinement and Exhaust”, Montreus, Switzerland, June 23–24, 2002.