FT-IR study of the stabilization reaction of polyacrylonitrile in the production of carbon fibers

The stabilized fibers prepared by heating PAN and a PAN copolymer in air and under reduced pressure have been examined by FT-IR spectroscopy in order to determine their chemical structures. Three kinds of reactions, cyclization, dehydrogenation, and oxygen uptake are found to occur almost simultaneously in the stabilization process in air by digital difference spectrum method. The effect of the comonomer is confirmed to accelate the dehydrogenation reaction and also the formation of acridone ring in the thermal stabilization in air by kinetic study.     

Structural variety of membrane permeable peptides

Peptide-mediated protein delivery into living cells has been attracting our attention. Among the peptides that have been reported to have carrier activity, the one from the human immunodeficient virus (HIV)-1 Tat has been most often used for the introduction of exogenous macromolecules into cells. We have shown that not only the Tat peptide, but also various arginine-rich peptides showed very similar characteristics in translocation, and the possible presence of ubiquitous internalization mechanisms among the arginine-rich peptides has also been suggested. These arginine-rich peptides includes ones derived from HIV-1 Rev and flock house virus coat proteins. The linear- and branched-chain peptides containing approximately 8 residues of arginine also show a similar ability. In this review, we present the structural variety of membrane permeable peptides and provide a survey of the findings on the translocation of these peptides through the cell membranes.     

DNA-bleomycin interaction: Nucleotide sequence-specific binding and cleavage of DNA by bleomycin

Biosynthetic intermediates and synthetic analogues of bleomycin (BLM) have been investigated for their metal binding, dioxygen activation, and DNA cleavage. Molecular O₂ was activated by the Fe(II) complex of a synthetic model ligand. Nucleotide sequence specificities in DNA cleavage by the BLM-Fe(II) and deglyco-BLM-Fe(II) complexes were almost identical. It has been shown that (1) the β-aminoalanine-pyrimidine-β-hydroxyhistidine portion of BLM is essential for the metal binding and dioxygen activation and (2) the bithiazole moiety contributes to the specific binding to guanine base of DNA.     

Fabrication of PbTiO3 Ceramic Fibers by Sol-Gel Processing

The sol-gel processing was applied to the fabrication of PbTiO₃ fibers. Pb(CH₃COO)₂·3H₂O and Ti(OC₃H ₇ ⁱ )₄ were refluxed with stirring in 2-methoxyethanol to form Pb-methoxyethoxide and Ti-methoxyethoxide, respectively, followed by mixing with stirring in 2-methoxyethanol to form Pb−Ti double alkoxide. The hydrolysis and polycondensation reaction of this double alkoxide gave polymerized products, and as a result the viscosity of the solution increased, suggesting that linear polymers were produced through the hydrolysis and polycondensation reaction. Homogeneous PbTiO₃ gel fibers were drawn from the spinnable viscous solutions, which were wellcrystallized into perovskite type PbTiO₃ at 650°C. The heat-treated fibers were a few centimeters long and from 10 to 100 μm in diameter. The fiber was made up of extremely uniform grains. Electron diffraction revealed a preferred growth of (101) planes along the fiber axis, which might be due to the linear molecular characteristics of the alkoxide.     

Catalyzed cycloaddition reactions of α-silyloxy-α,β-unsaturated ketone and aldehyde

The reactions of α-silyloxy-ga,β-unsaturated ketone and aldehyde with diene afforded [4+2] and [4+3] cycloadducts respectively in the presence of a catalyst.     

Studies on steroids. CC. Determination of 17-ketosteroid sulphates in serum by high-performance liquid chromatography with electrochemical detection using pre-column derivatization

A new sensitive method is described for the determination of 17-ketosteroid sulphates, particularly dehydroepiandrosterone sulphate, in human serum by high-performance liquid chromatography with electrochemical detection. The 17-ketosteroid sulphates in serum were extracted with acetonitrile and derivatized with p- nitrophenylhydrazine in trichloroacetic acid--benzene solution. The p- nitrophenylhydrazones were separated by high-performance liquid chromatography on a mu Bondapak C18 column using methanol--0.5% ammonium dihydrogen phosphate (8:3) as a mobile phase. The proposed method proved to be applicable to the quantitation of 17-ketosteroid sulphates with satisfactory sensitivity and reliability, providing a quantitation limit of 80 ng/ml and coefficient of variation of 4%. A good correlation was observed between the values obtained by the present method and radioimmunoassay for dehydroepiandrosterone sulphate in serum.     

Novel method to control release of lipophilic drugs with high potency from silicone

Silicone has been utilized as a carrier material for sustained release system of lipophilic drugs. Extensive studies revealed that drug release rate is influenced by factors such as physicochemical properties of the drug and additives.(1-5)) When a lipophilic drug is highly potent at low concentrations, the drug release rate should be strictly controlled so as to avoid side effects. In this study, using vitamin D(3) (VD(3)) as an example of such drugs, we investigated novel method to suppress initial burst and to modify drug release rate from silicone matrix. As a result, it was found that (a). addition of human serum albumin (HSA) suppressed initial burst and enhanced release rate in the later stage, resulting constant release of VD(3), (b). covering a matrix formulation with a membrane of low diffusivity (core-rod formulation) suppressed initial burst and released drug in a constant rate, and (3) using materials for which the drug has high affinity as dissolution solvent (reservoir formulation), the drug release rate was reduced.     

Effects of diazepam administration on melatonin synthesis in the rat pineal gland in vivo.

The effect of diazepam (DZP) on melatonin synthesis in rat pineal gland was investigated in vivo. Subcutaneous injection of DZP (3 mg/kg) 1 h before the start of darkness significantly suppressed nocturnal elevations of pineal N-acetylserotonin (NAS) and melatonin contents in rats, and caused a 2-h delay in reaching the maximum melatonin level in the dark phase. DZP treatment also markedly suppressed the dark-induced increase of pineal N-acetyltransferase activity, which catalyzes the rate-limiting step in melatonin synthesis, but had no effect on hydroxyindole-O-methyltransferase activity, which catalyzes the final step of melatonin formation. Pineal norepinephrine and dopamine contents, in contrast, were not altered by DZP injection. The distribution rate of DZP to the brain reached the highest level 30 min after a single injection, while that to the pineal gland was observed 5 h later (i.e., 4 h after the start of darkness). It is clear that the inhibitory effect of DZP on melatonin synthesis in rat pineal gland appears concomitantly with the increase in the distribution volume of DZP into this gland. These results suggest that the inhibitory effect of DZP on melatonin synthesis results from the drug's direct action on the rat pineal gland.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Synthesis and structure of 5,6,7,12-tetrahydrodibenz[c,f][1,5]azabismocines

Hypervalent organobismuth compounds, 6-tert-butyl-5,6,7,12-tetrahydrodibenz[c,f][1,5]azabismocines, with 13 different substituents on the bismuth atom including halogens, alkyl, alkenyl, alkynyl, aryl, or phenylthio groups have been synthesized. A key compound, 12-chloro-6-tert-butyl-5,6,7,12-tetrahydrodibenz[c,f][1,5]azabismocine, which is a precursor for other azabismocines, has been synthesized by two different procedures; one is based on Akiba’s method using 2-bromobenzylbromide as one of the starting materials and the other is a newly developed one using a cheaper starting material, 2-chlorobenzyl chloride. The structures of 12 new bismuth compounds were determined by X-ray diffraction. The eight-membered tetrahydroazabismocine ring has proved to be highly flexible and the hypervalent Bi-N bond distances vary ranging from 2.568(3) to 2.896(5) Å, depending on the electronic nature of the substituents on the bismuth atom. The Bi-N bond distances have good linear relationship against Hammett’s σ_m constants.