Photografting of vinyl polymers onto ultrafine inorganic particles: Photopolymerization of vinyl monomers initiated by AZO groups introduced onto these surfaces

The photografting of polymers onto ultrafine inorganic particles, such as silica and titanium oxide, initiated by azo groups introduced onto these surfaces was investigated. The introduction of azo groups onto the particles was achieved by the reaction of 4,4′-azobis(4-cyanopentanoic acid) with surface isocyanate groups, which were introduced by the treatment with tolylene 2,4-diisocyanate. It was found that the photopolymerization of vinyl monomers, such as methyl methacrylate (MMA), styrene, and N-vinylcarbazole, is initiated by ultrafine particles having azo groups. The corresponding polymers were effectively grafted onto these surfaces through the propagation of the polymer from the surface radicals formed by the photodecomposition of the azo groups: e.g., the percentage of grafting of PMMA and polystyrene onto silica was reached to 112 and 176%, respectively. The percentage of grafting onto silica in the graft polymerization initiated by photodecomposition of surface azo groups was much larger than that initiated by thermal decomposition. Polymer-grafted ultrafine particles thus obtained gave a stable colloidal dispersion in good solvents for the grafted chain. © 1994 John Wiley & Sons, Inc.     

Gas-stirred solvent extraction with propylene carbonate for separation and direct polarographic determination of thallium (III)

Gas-stirred propylene carbonate (PC) extraction can be performed by bubbling nitrogen without loss of volume. This extraction technique has proved to be highly useful for the separation and subsequent direct polarographic estimation of Tl(III) in the recovered PC phase. Tl(III) can be determined by differential-pulse polarography over the concentration range of 0.4 10 g ml^–1 without any interferences due to most metal ions such as Pb(II), Bi(III), Cu(II), Sb(III) and As(III). This proposed technique would be possible to use as a simple extraction step prior to the final estimation by instrumental method of analysis such as atomic absorption spectrometry or spectrophtometry.     

2-alkoxy and 2,2-dialkoxy nitriles from acetals and orthoesters — exchange of alkoxy into cyano group by means of cyanotrimethylsilane

Title transformation is accomplished by the catalytic action of SnCl₂ or BF₃·OEt₂ Lithio derivative of 2,2-dimethoxyacetonitrile is used as synthetic equivalent of methyl lithioformate.     

Micropore-free surface-activated carbon for the analysis of polychlorinated dibenzo-p-dioxins-dibenzofurans and non-ortho-substituted polychlorinated biphenyls in environmental samples

2,3,7,8-Substituted polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDD/Fs) and non-ortho-substituted polychlorinated biphenyls (PCBs) account for almost all of the total toxic equivalents (TEQ) in environmental samples. Activated carbon columns are used to fractionate the samples for GC-MS analysis or bioassay. Micropore-free surface-activated carbon is highly selective for PCDD/Fs and non-ortho-PCBs and can improve the conventional activated carbon column clean-up. Along with sulfuric acid-coated diatomaceous earth columns, micropore-free surface-activated carbon provides a rapid, robust, and high-throughput sample preparation method for PCDD/Fs and non-ortho-PCBs analysis.     

Synthesis of block copolymer with polystyrene and nylon units

Bis-ε-aminocaproylaminocaproylhexamethylenediamine ( I ) was synthesized as an analog of 6-nylon pentamer diamine, and its incorporation into block copolymers was studied with the use of α,ω-dihydroxyl, α,ω-bisdimethylchlorosilyl, and α,ω-diepoxy polystyrene. In the course of the experiments, the stability and the reactivity of 4,4′-diphenylmethane diisocyanate and tetramethylene diisocyanate in aprotic dipolar solvents were examined by infrared spectroscopy. The only usable solvent, N-methylpyrrolidone, was found still inadequate for the synthesis involving I, diisocyanate, and α,ω-dihydroxyl polystyrene. A block copolymer having M _n = 18,000 was obtained by the reaction of I and α,ω-diepoxy polystyrene. All T_g values of the block copolymers were above 90°C, higher than for polystyrenes with corresponding molecular weight.     

Effect of freezing rate on physical stability of lyophilized cationic liposomes

Factors affecting the storage stability of lyophilized cationic liposomes were investigated using liposomes prepared with various excipients and by different freezing rates, either quick freezing (freezing by immersion into liquid nitrogen) or slow freezing (cooling to -50 degrees C at a rate of -10 degrees C/h). Increases in the particle size of cationic liposomes observed during freeze-drying were inhibited by the addition of sucrose, trehalose and sucrose-dextran mixtures (1 : 1 and 2 : 1 by weight). The storage instability of the formulations, as indicated by changes in particle size, was affected by their glass transition temperature (T(g)). Addition of high-T(g) excipients resulted in smaller increases in the particle size, indicating improvement of storage stability. The storage stability of cationic liposome formulations was also affected by freezing rate. Formulations prepared by slow freezing exhibited better stability. Longer shear relaxation times were observed for formulations prepared by slow freezing compared with those prepared by quick freezing. This indicates that formulations prepared by slow freezing have a lower matrix mobility, which may result in better storage stability. T(g) or (1)H-NMR relaxation measurements could not detect differences in matrix mobility between formulations prepared by different freezing rates. Shear relaxation measurements seem to be a useful method for evaluating the storage stability of cationic liposome formulations.     

Photoinduced ionic polymerization. VII. Cationic polymerization of cyclohexene oxide in solid state

Photopolymerization of cyclohexene oxide in the presence of electron acceptors was studied in a bulk system (in liquid as well as in solid states). The polymerization was proved to proceed by a cationic mechanism in both states by the effect of inhibitors. In a liquid phase the light intensity dependence of the rate of polymerization and the molecular weight distribution showed a contribution of a free ionic polymerization. Any discontinuous phenomenon in the rate as well as in the molecular weight was not discerned between liquid(above ?36°C) and plastic crystal (between ?36 and ?81°C) phases. A quantum yield of monomer consumption as high as 8 × 10³ was observed in the plastic crystal phase. Below ?81°C in the normal crystal phase the rate as well as the molecular weight was remarkably suppressed.     

Three novel quassinoids, javanicolides A and B, and javanicoside A, from seeds of Brucea javanica

Two novel quassinoids, javanicolides A and B, and one novel quassinoid glucoside, javanicoside A were isolated from the seeds of Brucea javanica Merr. (Simaroubaceae), along with four known quassinoids, yadanziolides A and D, and bruceins D and E, and two known quassinoid glucosides, yadanziosides D and L. Their structures were elucidated by the analysis of spectral data and chemical evidence.     

The diazocarbene (CNN) molecule: characterization of the X 3Sigma- and A 3Pi electronic states

The ground (X (3)Sigma(-)) and first excited triplet (A (3)Pi) electronic states of diazocarbene (CNN) have been investigated systematically starting from the self-consistent-field theory and proceeding to the coupled cluster with single, double, and full triple excitations (CCSDT) method with a wide range of basis sets. While the linear X (3)Sigma(-) ground state of CNN has a real degenerate bending vibrational frequency, the A (3)Pi state of CNN is subject to the Renner-Teller effect and presents two distinct real vibrational frequencies along the bending coordinate. The bending vibrational frequencies of the A (3)Pi state were evaluated via the equation-of-motion coupled cluster (EOM-CC) techniques. The significant sensitivity to level of theory in predicting the ground-state geometry, harmonic vibrational frequencies, and associated infrared intensities has been attributed to the fact that the reference wave function is strongly perturbed by the excitations of 1pi-->3pi followed by a spin flip. At the highest level of theory with the largest basis set, correlation-consistent polarized valence quadruple zeta (cc-pVQZ) CCSDT, the classical X-A splitting (T(e) value) was predicted to be 68.5 kcal/mol (2.97 eV, 24 000 cm(-1)) and the quantum mechanical splitting (T(0) value) to be 69.7 kcal/mol (3.02 eV, 24 400 cm(-1)), which are in excellent agreement with the experimental T(0) values, 67.5-68.2 kcal/mol (2.93-2.96 eV, 23 600-23 900 cm(-1)). With the EOM-CCSD method the Renner parameter (epsilon) and averaged bending vibrational frequency (omega(2)) for the A (3)Pi state were evaluated to be epsilon=-0.118 and omega(2)=615 cm(-1), respectively. They are in fair agreement with the experimental values of epsilon=-0.07 and nu(2)=525 cm(-1).     

Single molecular multianalyte sensor: jewel pendant ligand

[structure: see text] The jewel pendant ligand has multiple chromogenic units combined in a single molecule with the dyes linked to a semiselective binding site by three heteroatoms (O, N, S) having different HSAB characteristics, to indicate diverse response to individual transition metal ions. Using a single-molecular multianalyte sensor, multiple analytes could be determined with a minimal sensing system.