Measurement technique for depth profiling in time-domain low-coherence interferometer

A measurement technique for depth profiling in a time-domain low-coherence interferometer has been proposed. The spatial variation of the optical path caused by a diffraction grating in the Littrow configuration produces a white-light interferogram. A one-dimensional charge-coupled device (1D-CCD) detector is used to measure the undersampled white-light interferogram. The position of the reflective boundary is calculated from the rate of phase change with spatial frequency, which is based on the sub-Nyquist sampling of the white-light interferogram in the frequency domain.     

Ion-Selective Electrodes Based on Bilayer Film Coating

The electrode characteristics of ion-selective electrodes (ISEs) for K⁺, Na⁺, NH₄ ⁺, and Ca²⁺ based on bilayer film coatings, where the inner layer films are electroactive electropolymerized ones and the outer layer films are composed of conventional ion-sensitive materials, have been examined. These ISEs of the coated-wire electrode type have no conventional internal reference solution and reference electrode, but the inner films may be considered to function as the “internal standard solution.” The ion selectivity coefficients and the activity range showing Nernstian response were almost comparable to those of conventional liquid-membrane electrodes. The bilayer-coated ISEs showed insensitivity to O₂ and CO₂, long-term stability, and little drift. It was also found that the electrode performance is practically unchanged after sterilization in an autoclave. The results demonstrate that the bilayer-coated ISEs examined are promising for the determination of K⁺, Na⁺, NH₄ ⁺, or Ca²⁺ activity in biological and environmental systems.     

Voltammetric Determination of Boric Acid Using the Ternary Complexation System with Salicylaldehyde and H‐Acid

A square‐wave voltammetric method for the determination of boric acid in water has been described based on the new understanding of the electrochemical behavior of boric acid‐Azomethine H complexation. Salicylaldehyde and H‐acid were used as the starting materials of boric acid‐Azomethine H complex and their concentrations were optimized for boric acid determination in water. A glassy carbon electrode, instead of a conventional mercury electrode, was used in the measurement. The detection limit of the proposed method was 0.10 mg B dm^?3. The proposed method was successfully used for boric acid determination in the water from a seawater desalination RO plant.     

Pressure-Induced Solidification of 1-Butyl-3-methylimidazolium Tetrafluoroborate

We have used Raman spectroscopy to investigate the high-pressure phase behavior of 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]), a representative ionic liquid, at pressures up to ~7.5 GPa. We have also studied how increasing pressure leads to conformational changes in the [bmim]⁺ cation. We have found that liquid [bmim][BF₄] undergoes pressure-induced solidification (freezing) into a superpressed (metastable) state at 2.5 GPa; another structural change probably occurs at ~6 GPa. Remarkably, conformational changes in the [bmim]⁺ cation between trans and gauche conformers are concordant with the metastable structural changes of [bmim][BF₄]. As the pressure is increased from ambient, the fraction of gauche conformers increases, but the gauche fraction decreases above the solidification pressure (2.5 GPa), and slope of the gauche/trans ratio changes again above 6 GPa. We interpret these results in terms of the fragility of the ionic liquid.     

Measurement of Flexo-coefficients for Nematic LCs without the Influence of the Impurity Ions by Using the Chromatographic Isolation Method

The sum of the flexo-coefficients (e₁₁+e₃₃) was measured by the capacitance characteristic depending on the applied dc voltage in the HAN cell. The voltage for the minimum value of the capacitance was shifted by the influence of flexoelectric effect. One of the important problems for the evaluation for the flexo effect was the influence of impurity ions. Then, the chromatographic isolation phenomenon was used to separate impurity ions when the LC material was injected into the empty cell by the capillary action. The coefficient (e₁₁+e₃₃) of ZLI-4792 was measured, and a value of 26.0 pC/m was obtained.     

Chiral Phosphoric‐Acid‐Catalyzed Transfer Hydrogenation of Ethyl Ketimine Derivatives by Using Benzothiazoline

Chiral phosphoric acid catalyzed transfer hydrogenation of ketimines derived from propiophenone derivatives and reductive amination of alkyl ethyl ketone derivatives were extensively examined in the presence of two representative hydrogen donors. The excellent enantioselective transfer hydrogenation was achieved by use of benzothiazoline as a hydrogen donor. The theoretical studies elucidated that the unsymmetrical structure of benzothiazoline plays an important role in high enantioselective hydrogenation.     

Photodynamic Activity on Biofilm in Endotracheal Tubes of Patients Admitted to an Intensive Care Unit

Ventilator-associated pneumonia (VAP) is an infection that arises after endotracheal intubation affecting patients under intensive care. The presence of the endotracheal tube (ETT) is a risk factor since it is colonized by multispecies biofilm. Antimicrobial photodynamic therapy (aPDT) could be a strategy to decontaminate ETTs. We verify if methylene blue (MB) associated with external illumination of the ETT could be an alternative to destroy biofilm. We performed an in vitro and ex vivo study. In vitro study was performed with P. aeruginosa biofilm grew over ETT for 7 days. After treatment, the surviving cells were cultured for 3 days and the biofilm was analyzed by crystal violet absorbance. Ex vivo study employed ETT obtained from extubated patients. aPDT was performed with MB (100 µm ) and red LED (λ = 640±20 nm). We quantified the biofilm thickness and used scanning electron microscopy and fluorescence technique to verify morphological and functional changes after aPDT. Our results showed that bacteria remain susceptible to aPDT after sequential treatments. We also attested that aPDT can reduce biofilm thickness, disrupt biofilm attachment from ETT surface and kill microbial cells. These data suggest that aPDT should be investigated to decrease VAP incidence via ETT decontamination.     

Simultaneous Delamination and Rutile Formation on the Surface of Ti3C2Tx MXene for Copper Adsorption

In this work, we studied the formation of the rutile phase of titanium dioxide (TiO₂) on delaminated MXene (d‐Ti₃C₂T_x) flakes by the reaction of Ti₃C₂T_x with amino acids in water. Three types of amino acids with varied side‐chain polarity were used to delaminate Ti₃C₂T_x. d‐Ti₃C₂T_x flakes formed stable colloidal solutions due to the negative surface charges of chemisorbed amino acids on the d‐Ti₃C₂T_x. Rutile formed on d‐Ti₃C₂T_x at room temperature upon the intercalation of aromatic amino acids and subsequent sonication of the solution, while flakes intercalated with aliphatic amino acids did not oxidize. X‐Ray diffraction (XRD), transmission electron microscopy (TEM) and Raman spectroscopy revealed the nanosize rutile formation on the surface of Ti₃C₂T_x flakes. The XPS results indicated the surface functionalization of histidine on d‐Ti₃C₂T_x flakes. As‐synthesized histidine functionalized rutile TiO₂@d‐Ti₃C₂T_x hybrid was used for adsorption of Cu²⁺ ions from aqueous solution with a maximum uptake of 95 mg g^?1.     

FT-NIR Spectroscopy of some long-chain fatty acids and alcohols

Fourier-transform (FT) near-infrared (NIR) spectroscopy has proved to be a powerful technique in investigating structure and thermodynamic properties of long-chain fatty acids and alcohols. In order to extract useful information from the NIR spectra, bands due to the second as well as first overtones of OH-stretching modes of the monomeric forms were employed. It has been also found that two-dimensional (2D) NIR correlation spectroscopy can accentuate useful information often obscured in the complicated NIR spectral data set.